Professional Documents
Culture Documents
Lab View
Lab View
1. Insert CD3 for Labview 7.1 for windows xp [Professional Development System] 2. Make all prompts for Accept and Next in the subsequent window dialog boxes. 3. Keep CD26 and CD27 for Device Driver CD1 and CD2 respectively. 4. Insert CD26 when prompted for Device Driver CD1 and then again CD 27 for CD2. 5. Check the NiCard number used and use corresponding 2 CDs for its installation. There are 2 CDs for each of three NI Cards. 6. Install NiDaqMx CD 1 of 2 and then CD 2 of 2. [check the Ni Card number you are using and the card number written on the CDs., they must match e.g. card #2] 7. Again prior to operation insert the USB cord and install the software automatically from the "Found New Hardware Wizard" dialog box. 8. The green signal in the card will start blinking indicating successful installation.