The document provides instructions for connecting cables between an OMT cable and DU for an RBS 6000S using RJ45 connectors, specifying the pin connections. It also provides instructions for getting the IP address of a Node B 3000s that is being swapped to a 6000s using a hyperterminal, including connecting a DB9 to RJ45 cable to the test port or CBU card, and entering commands in the hyperterminal to retrieve the IP address.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online from Scribd
The document provides instructions for connecting cables between an OMT cable and DU for an RBS 6000S using RJ45 connectors, specifying the pin connections. It also provides instructions for getting the IP address of a Node B 3000s that is being swapped to a 6000s using a hyperterminal, including connecting a DB9 to RJ45 cable to the test port or CBU card, and entering commands in the hyperterminal to retrieve the IP address.
The document provides instructions for connecting cables between an OMT cable and DU for an RBS 6000S using RJ45 connectors, specifying the pin connections. It also provides instructions for getting the IP address of a Node B 3000s that is being swapped to a 6000s using a hyperterminal, including connecting a DB9 to RJ45 cable to the test port or CBU card, and entering commands in the hyperterminal to retrieve the IP address.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online from Scribd
The document provides instructions for connecting cables between an OMT cable and DU for an RBS 6000S using RJ45 connectors, specifying the pin connections. It also provides instructions for getting the IP address of a Node B 3000s that is being swapped to a 6000s using a hyperterminal, including connecting a DB9 to RJ45 cable to the test port or CBU card, and entering commands in the hyperterminal to retrieve the IP address.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online from Scribd
OMT Cable to DU for RBS 6000S RJ45 connector Pin1 pin 2 pin 3 ke ke ke 9-pin sub connector (M) pin
5 pin 3 pin 2
Node B 3000s swap to 6000s
Hyper terminal To get the IP for node b by hyper terminal. Connect (DB 9---RJ45) cable to node b ( test port, cbu card ) DB9 RJ45 2 2 3 3 5 5 Open H/Terminal, get $ symbol and push enter, p/word=rbs, username=rbs