Professional Documents
Culture Documents
1364 1
1364 1
(Fourth
ICS
Revision )
21.060.10
@ BIS 2002
BUREAU
MANAK
OF
BHAVAN,
INDIAN
STANDARDS
SHAH 110002 ZAFAR MARG
/Vovernber
2002
Price Group
IS 1364 (Part 1): 2002 1s0 4014:1999 Bolts, Nuts and Fasteners Accessories Sectional Committee, BP 33
NATIONAL
FOREWORD
This Indian Standard (Part 1) (Fourth Revision) which is identical with ISO 4014:1999 Hexagon head boltsProduct grades A and B issued by the International Organization for Standardization (ISO) was adopted by the Bureau of Indian Standards on the recommendation of the Bolts, Nuts and Fasteners Accessories Sectional Committee and approval of the Basic and Production Engineering Division Council. IS 1364 was originally published in 1960 and first revised in 1967. Subsequent to the publication of 1967 edition, many changes had been agreed upon at international level which have been reflected in IS 1367 series of standards covering Technical supply conditions for threaded steel fasteners. Accordingly, second revision was published in 1983 splitting the standard into 5 parts covering hexagon head bolts, hexagon head screws, hexagon nuts, hexagon thin nuts (chamfered) and hexagon thin nuts (unchamfered). The third revision of this standard was published in 1992 by adoption of ISO 4014:1988. This fourth revision has been prepared by adoption of latest version of ISO 4014 published in 1999. The remaining parts of the standard, that is, Part 2, Part 3, Part 4 and Part 5 have also been revised by adopting the corresponding latest editions of ISO Standards published in 1999. The Committee also decided to publish Indian Standard on Hexagon nuts, style 2Product and B as Part 6 of IS 1364. The Part 6 will supersede 1S/1S0 4033:1979 on its publication. grades A
In 1967 version of this standard, the widths across flat dimensions for Ml O and Ml 2 size fasteners were specified as 17 mm and 19 mm respectively. However, in the 1983 version, these widths across flat dimensions were brought in line with ISO 4014:1979 and specified as 16 mm and 18 mm respectively for Ml O and Ml 2 size fasteners. Recognizing the difficulty of immediate changeover to new width across flat dimensions, the Committee had decided to permit width across flat dimensions as per 1967 version, that is, 17 mm and 19 mm for Ml O and M12 size fasteners till 31 December 1994. Now it is expected that the entire fastener industry would have switched over to new width across flat dimensions and from 1 January 1995, no old width acrossflat dimensions shall be permitted. The text of ISO Standard has been approved as suitable for publication as Indian Standard without deviations. Certain terminology and conventions are, however, not identical to those used in Indian Standards. Attention is drawn especially to the following: a) Wherever the words International be read as lndia~ Standard. Standard appear referring to this standard, they should
b)
Comma (,) has been used as a decimal marker while in Indian Standards, the current practice is to use a point (.) as the decimal marker.
In this adopted standard, reference appears to certain international Standards for which Indian Standards also exist. The corresponding Indian Standards which are to be substituted in their place are listed below along with their degree of equivalence for the editions indicated: /nternationa/ Standard Corresponding Indian Standard Degree of Equivalence Identical
ISO 225:1983
ISO 724:1993
IS 4218 (Part 3):1999 ISO General purpose metric screw threads: Part 3 Basic dimensions (second revision) (i)
do
Internatiom!
Standard
Corresponding
Indian
Standard
ISO 888:1976
!S0 898-1:1999
IS 1367(Part 3):2002 Technical supply conditions for threaded steel fasteners: Part 3 Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs (fourth revision) IS 14962(Part 1): 2001 ISO General purpose metric screw threadsTolerances: Part 1 Principles and basic data IS 1367 (Part 17):1 99621 Industrial fasteners Threaded steel fastenersTechnical supply conditions : Part 17 inspection, sampling and acceptance procedure (third revision) IS 1367 (Part 14/See 1):2002 Technical supply conditions for threaded steel fasteners: Part 14 Mechanical properties of corrosion resistant stainlesssteel fasteners, Section 1 Bolts, screws and studs (third revision) IS 1364(Part 2):2002 Hexagon head bolts, screws and nuts of product grades A & B: Part 2 Hexagon head screws (size range (M 1.6 to M 64) (fourth revision) @ 1367 (Part 11):2002 Technical supply conditions for threaded steel fasteners: Part 11 Electroplated coatings (third revision) IS 1367 (Part 2):2002 Technical supply conditions for threaded steel fasteners: Part 2 Product grades and tolerances (third revision) 1367(Part 9/See 1):1 993 Technical supply conditions for threaded steel fasteners : Part 9 Surface discontinuities, Section 1 Bolts, screws and studs for general applications (third revision) IS 1367 (Part 1):2002 Technical supply conditions for threaded steel fasteners: Part 1 Introduction and general information (third revision)
do
ISO 965-1:1998
do
;S0 3269:1)
do
!S0 3506-1:1997
do
1s0 4017:1999
do
ISO 4042:1999
do
do
ISO 6157-1:1988
do
ISO 8992:1986
do
~TTo be Since
publishedrevision
published in 2002.
of (I SO 3269:1 988).
Z) Identical
(ii)
The concerned Technical Committee has reviewed the provisions of the following ISO Standards referred i, I this adopted standard and has decided that they are acceptable for use in conjunction with this standard: ISO Standard ISO 8839:1986 Mechanical non-ferrous properties metals of fasteners Title Bolts, screws, studs and nuts made of
ISO 16048:1)
ALTERATION In clause 5 the designation Hexagon of hexagon head bolt shall be read as:
1S0 4014M12
1)11S04014-
M12 x 80-8.8
CORRIGENDUM (Page 4, Tab/e 1, co/2, in place of 2.27. row 12)Against dimension dw , for Product grade A, size M 1.6 read 2.X?
(Page 4, Table 1, co/7, row20 & 21 )Against dimension k, for Product grade B, size M 5 read 3.74 max and 3.26 rein in p/ace of 3.26 max and 2.35 rein respectively. (Page 4, Tab/e 1, co/7, in place of 3.74. row 22)Against dimensions kWe, for Product grade A, size M 5 read 2.35
(Page 5, Tab/e 1, co/6 )Read /, rein in p/ace of ~ min. (Page 9, Table 2, COI6,)Read PACKAGING The packaging of hexagon head bolts shall be in accordance with IS 1367(Part 18):1996 Industrial fasteners Threaded steel fasteners Technical supply conditions :Part 18 Packaging (third revision). BIS CERTIFICATION MARKING /~min as1 51.5 in p/ace of151 .6 for nominal length 260.
Details available with the Bureau of Indian Standards. For the purpose of deciding whether a particular requirement of this standard is complied with, the final value, observed or calculated, expressing the result of a test or analysis, shall be rounded off in accordance with IS 2:1960 Rules for rounding off numerical values (revised). The number of significant places retained in the rounded off value should be the same as that of the specified value in this standard.
in 20W.
(iii)
Indian Standard
HEXAGON
PART 1
(SIZE
RANGE
M 1.6 TO M 64)
1 Scope
Revision )
This International Standard specifies the characteristics of hexagon head bolts with threads from Ml,6 up to and including M64, of product grade A for threads Ml,6 to M24 and nominal lengths up to and including 10 d or 150 mm,
whichever shorter. is shorter and product grade B for threads over M24 or nominal lengths over 10 d or 150 mm, whichever is
If, in special cases, specifications other than those listed in this International Standard are required, they should be selected from existing international Standards, for example ISO 724, ISO 888, ISO 898-1, ISO 965-1, ISO 3506-1, ISO 4753 and ISO 4759-1.
2 Normative
references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to armiies. Members of ISO and IEC .. maintain registers of currently valid International Standards. ISO 225:1983, ISO 724:1993, ISO 888:1976, ISO 898-1:1999, and studs. ISO 965-1:1998, Fasteners Bolts, screws, studs and nuts Symbols and designations metric screw threads Basic dimensions. bolts. of dimensions.
ISO general-purpose
Bolts, screws and studs Nominal lengths, and thread lengths for general purpose Mechanical properties of fasteners
ISO 3269:1), Fasteners Acceptance ISO 3506-1:1997, studs. ISO 4017:1999, ISO 4042:1999, ISO 4753:2), Mechanical properties
IS
1364
( Part 1 ) :2002
1s0 4014:1999
ISO 4759-1 :3), Tolerances ISO 6157-1:1988, ISO 8839:1986, ISO 8992:1986, for fasteners Part 1: Bolts, screws, studs and nuts Product grades A, Band
C.
of fasteners Bolts, screws, studs and nuts made of non-ferrous metals. for bolts, screws, studs and nuts,
k I
.. + I!!!P
al
x
I---4 k. If
Al---Q/l=15to30 Point shall be chamfered Incomplete Referee Maximum thread u < 2P or for threads < M4 maybe as-rolled (sheared end) (see ISO 4753) datum for dw fillet underhead
Figure 1
o 0
N
nom. = max.
A Mln,
1,60
1,46 1,35 2,27 2,3 3,41 3,28
grade
/f
T
max. nom.
Prcducf grade
Product grade Product grade
A max.
min.
B max.
min.
A min. %min. nom. . max.
b r s
0,68 0,63
0,1 3,20 3,02 2,90
Product grade T
A min.
II
Product grade
I I
I nom. 12 16 20 25 30 35 min. 11,65 15,85 19,56 24,56 29,58 34,5
AIB
/ max. 12,35 16,35 20,42 25,42 30,42 35,5 40,5
19 min. 18,95 23,95 28,95 33,75 38,75 max. 21,05 26,05 31.05 36,25 41,25 6 10 --max.
Is min.
kl
max.
1~ min.
9 max.
1~ min.
19 max.
Is min.
9 max.
1= min.
[9 max.
1= min.
9 max.
Is min.
9 max.
2,75 6,75 1 I
5 9 5,5 10,5 1 , 8 13
11,75 14 - ---
11 16 21 26 -
5 10 15 20 1 25 I 30 I L. --
9 14 19 24 29 34 - 7 12 17 22 27 1 I I 32 37 -12 17 22 27 32 37 42 - 11,75 16,75 21,75 26,75 31,75 1 I I I I , 36,75 41,75 51,75 ---18 23 28 33 38 43 48 58 1 I ; 11,5 16,5 21,5 26,5 31,5 36,5 46,5 56,5 66,5 --19 24 29 34 39 44 54 64 74 -_.
15,5 18 -
H=l=EE
40 39,5 45 44,5 45,5 43,75 46&5 50 49,5 50,5 48,75 53,5 51,25 55 54,4 55,6 60,6 56,5 I 60 I 59,4 I ] 58,5 ! I 61,5 t 66 I 64,4 t 65,6 ! 63,5 66,5
m
I 80 t 79.4 i 60.6 t 78.5 ul
81.5
6
max.
110 I 109,3 I 110,7 ] 108,25[ 130 I 129,2 I 130,81 140 I 139,2 I 140,8 I 150 I 149,2 I 150,8 [ 128 138 148 158 178 197,7 217,7 237,7 257,4 I 277,4 I 297,4 317,15 337,15 357,15 3i7,15 397,15 416,85 436,85 456,85 476,85 496,85 i
111,75
71,25
I 132
142 152 162 182 202,3 222,3 242,3 262,6, I 282,6 I 332,6 322,85 342,85 362,85 382,85, 402,85 423,15 443,15 463,15 483,15 503,15 I \ I
8125 ,__ I
H
I
80 90 . t , I L
62 72 76 -86 -106 I
72 82 86 I
64 74 78 I
41 51 55 [ :!
44 ~ 58 I 68 ,8 36 46
70!1 I :1
1
1111111111
56 66 ~ 76 96 lW 123 143 96 116 123 143 163 I 183 203 223 243 263 .5 61,5 81,5 88,5 108,5 128.5 I 14851171 168;5 188,5 208,5 228,5 248.5 268;5 288,5 308,5 191 211 231 251 271 291 311 331 64 84 104 111 131 151 47 67 74 84 114 ! 134 lh 174 184 214 234 254 274 284 314 334 72 92 99 119 139 I 159 -179 199 219 239 259 279 299 319 338 359 55,5 75,5 95.5 I 115;I .. -,135,5 155,5 175,5 195,5 215.5 235,5 255,5 275,5 295,5 315,5 335,5 83 103 123 Ii; ---- I 163 183 203 223 243 263 283 303 323 343 383
1%
,:
g
115,5 135,5
:
128 148
:
____ .85] 105 125 132 152
[1601 1
180 2043 220 240 260 2801 3ool-l 320 340 360 380 400 420 440 460 480 500 NOTE l l l l I
100170,5188156176 120 140 147 167 90,5 110,5 117,5 137,5 157,5 108 128 135 155 175
n
117 137 157 177 1!37 217 237 257 277 297 317
107
II
i; . I ;;; ,-. 147 167 187 207 997 247 267 287 307 327 347
Ior productgrsde A, above the dsshed, stepped fine; for preductgrsde B, below this stepped Ime. a P is the pitchof the threed. b For lengthslnOm=s125 mm.
c e
e k, Inn= ,7 kin ( /9, ~ax = /nom - b s 200 mm. k, mm= lg. max 5P Q /0 is the minimum grip length.
threads
Dimensions in millimetres M18 2,5 42 48 61 0,8 0,2 20,2 18,00 17,73 17,57 25,34 24,85 30,14 29,56 3 11,5 11,715 11,285 11,85 11,15 7,9 7,81 0,6 27,W 26,67 M22 2,5 50 56 69 0,8 0,2 24,4 22,00 21,67 21,48 31,71 31,35 37,72 37,29 4 14 14,215 13,785 14,35 13,65 9,65 9,56 0,8 34,00 33,38 33,00 M27 3 60 66 79 0,8 0,2 30,4 27,00 26,48 38 45,2 6 17 17,35 16,65 . 11,66 1 41 40
M3,5 0,6 13 19 32 0,40 0,15 4,1 3,50 3,32 3,20 A min. T A min. T max. nom, Product A max. min. B max. min. A min. T min. nom. = max. A min. B Product grade Product grade A / B 1~ min. 38,75 43,75 48,75 53,5 58,5 63,5 68,5 78,5 88,25 98,25 108,25 118,25 128 138 148 max. 41,25 46,25 51,25 56,5 61,5 66,5 71,5 81,5 91,75 101,75 111,75 121,75 132 142 152 I min. 4 9 14 19
9 1~
M14 2 34 40 53 0,60 0,15 15,7 14,00 13,73 13,57 19,64 19,15 23,36 22,78 3 8,8 8,98 8,62 9,09 8,51 6,03 5,96 0,6 21,00 20,67 20,16 I
ref.
c d
c da
d~
Product grade T
A min.
dw
Product grade
5,07 4,95 6,58 6,44 1 2,4 2,525 2,275 2,6 2,2 1,59 1,54 0,1 6,00 5,82 5,70
Product grade
If
kwe
.7
26,16
/~ and/g@
9 1~ 9 Is 9 Is 9
min. 19,58 24,58 29,58 34,5 39,5 44,5 49,5 54,4 59,4 64,4 69,4 79,4 89,3 99,3 109,3 119,3 129,2 139,2 149,2
max. 20,42 25,42 30,42 35,5 40,5 45,5 50,5 55,6 60,6 65,6 70,6 80,6 90,7 100,7 110,7 120,7 130,8 140,8 150,8
max. 7 12 17 22 , , 1
min.
max.
min.
max.
min.
max. I
min.
max.
I
, For sizes atmve the dashed, boldface stepped line ISO 4017 is recommended.
I
1
16 21 26 36 46 56 66 76 80
26 31 36 46 56 66 76 86 90 I 15,5 25,5 35,5 45,5 55,5 65,5 69,5 79,5 28 38 48 58 68 78 82 92 27,5 37,5 47,5 57,5 61,5 71,5 ___,815_91,5 111,5 131,5 138,5 40 50 60 70 74 84 94 , 104 i:
J
1 i
25 35 45
40 50 60 :
90 100 L. ____
69 79
84 94
%-1-a-%
*
Th,mwl
(Al
M33
M39
M45
M5z
M60
NOTE
for product grade A, above the dashed, stepped hne, for product grade B, below this stepped tine. a P ISthe pitch of the thread
b c d
For lengths lnOms 125 mm. For lengths 125 mm < /nom * 200 mm. For lengths /nom ~ 200 mm.
IS
1364
( Part
1 ) :2002
1s0 4014:
1999
4 Specifications
See Table 3.
Table 3 Specifications
Material >eneral requirements rhread International Standard Tolerance International Standards Property classa Steel
6g ISO 724, ISO 965-1 d <3 mm: as agreed 3mm<d=39 mm: 5.6, 8.8, 9.8, 10.9 d >39 mm: as agreed 3mm=d=39 mm: ISO 898-1 d<3mmandd>39 mm: as agreed Ford> ds 24 mm: A2-70, A4-70 24mm<d<39 mm: A2-50, A4-50 d >39 mm: as agreed ds 39 mm: ISO 3506-1 d >39 mm: as agreed Materials specified in ISO 8839
Vlechanical woperties
International Standards
tolerances
l<10dor150mmb:A >10dor150mmb: B
1s0 4759-1
As processed Requirements for electroplating are covered in ISO 4042 Requirements for non-electrolytically applied zinc flake coatings are covered in ISO 10683
Plain
If different electroplating requirements are desired or if requirements are needec for other finishes, they should be agreed between customer and supplier. Limits for surface discontinuities are covered in ISO 6157-1
Acceptability
a
For other property classes see
b Whichever
is shorter.
5 Designation
EXAMPLE A hexagon head bolt with thread Ml 2, nominal length 1= 80 mm and property class 8.8 is designated as follows:
10
Bibliography
approximately
Hexagon head bolts Product grade C. Hexagon head screws Product grades A and B. Hexagon head screws Product grade C. Hexagon nuts, style 1 Product grades A and B. Hexagon nuts, style 2 Product grades A and B. Hexagon nuts Product grade C. Hexagon Hexagon thin nuts (chamfered) thin nuts (unchamfered) Product grades A and B. Product grade B.
ISO 4018:1999, ISO 4032:1999, ISO 4033:1999, ISO 4034:1999, ISO 4035:1999, ISO 4036:1999,
[11] ISO 41 62:51, Hexagon boks with flange Small series Product grade combination [12] ISO 4775:1984, Hexagon nuts for high-strength grade B Property classes 8 and 10. structural bolting with large
width across
[13]ISO 7411:1984,
according
Hexagon bolts for high-strength structural bolting with iarge width across flats (thread lengths to 1S0 888) Product grade C Property classes 8.8 and 10.9. with large width across flats (short thread
[14] ISO 7412:1984, Hexagon bolts for high-strength structural bolting length) Product grade C Propefly classes 8.8 and 10.9.
[15]ISO 7413:1984,
Hexagon nuts for structural bolting, grades A and B Propefly classes 5, 6 and 8. nuts for structural
style
1, hot-dip galvanize
(oversize
tamedj ,,,
Product
[17] ISO 7417:1984, Hexagon nuts for structural grade A Propetiy class 9. [18] ISO 8673:1999, [19] ISO 8674:1999, [20] ISO 8675:1999, [21] ISO 8676:1999,
bolting,
style 2, hot-dip
galvanize
(oversize
tapped) Product
Hexagon nuts, style 1, with metric fine pitch thread Product grades A and B. Hexagon nuts, style 2, with metric fine pitch thread Product grades A and B. Hexagon thin nuts (chamfered) with metric fine pitch thread Product grades A and B.
Hexagon head screws with metric fine pitch thread Product grades A and B.
11
Hexagon nuts with flange Fine pitch thread. Hexagon bolts with flange Small series Product grade A.
12
Bureau
of In(tian
Standards
BIS is a statutory institution established under the Bureau of Indian Standards Act, 1986 to promote harmonious development of the activities of standardization, marking and quality certification of goods and attending to connected matters in the country.
Copyright
BIS has the copyright of all its publications. No part of these publications may be reproduced in any form without the prior permission in writing of BIS. This does not preclude the free use, in the course of implementing the standard, of necessary details, such as symbols and sizes, type or grade designations. Enquiries relating to copyright be addressed to the Director (Publication), BIS.
Review of Indian Standards
Amendments are issued to standards as the need arises on the basis of comments. Standards are also reviewed periodically; a standard along with amendments is retilrmed when such review indicates that no changes are needed; if the review indicates that changes are needed, it is taken up for revision. Users of Indian Standards should ascertain that they are in possession of the latest amendments or edition by referring to the latest issue of BIS Catalogue and Standards: Monthly Additions. This Indian Standard has been developed from DOC:No. Bp 33 (0113 ).
Amendments
Amend No.
Date of Issue
Text Affected
BUREAU OF INDIAN STANDARDS Headquarters: Manak Bhavm, 9 Bahadur Shah Zafar Marg, New Delhi 110002 Telephones: 3230131,3233375, 3239402 Regional Offices: Central Eastcm Northern Southern Western Branches : Manak Bhavan, 9 Bahadur Shah Zafar Marg NEW DELHI 110002 : 1/14 C.I.T. Scheme VII M, V.I.P. Road, Kankurgachi KOLKATA 700054 : SCO 335-336, Sector 34-A, CHANDIGARH 160022 : C.I.T. Campus, IV Cross Road, CHENNAI 600113 : Manakalaya, E9 MIDC, Marol, Andheri (East) MUMBAI 400093 Telegrams: Manaksanstha (Common to all oftices) Telephone 3237617,3233841 3378499,3378561 { 3378626,3379120 603843 { 602025 2541216,2541442 { 2542519,2541315 8329295,8327858 { 8327891, 8327892
: AHMEDABAD. BANGALORE. BHOPAL. BHUBANESHWAR. COIMBATORE. FAR.IQ4BAD. GHAZIABAD. GUWAHATI. HYDERABAD. JAIPUR. KANPUR. LUCKNOW. NAGPUR. NALAGARH. PATNA. PUNE. RAJKOT. THIRUVANANTHAPURAM. VISAKHAPATNAM.