Professional Documents
Culture Documents
Interior - Wall HAM Instructions
Interior - Wall HAM Instructions
Interior - Wall HAM Instructions
Zone 1 with four walls and four windows Zone 2 with four walls and four windows
The common wall between the zones is constructed from an ordinary wall block. Take an ordinary wall block from the library and look behind the block mask see the example below
NEW BLOCK
INTERIOR WALL CLADDING 1 is a copy of INTERIOR WALL CLADDING 2, with one new output Last node.
Last node.
Go one level below and define surface transfer coefficients alfacin1 and betaPin1 in the block mask of Internal surface node /CTH. Check the names of the parameters with the ones specified in the main block mask (see slide 6)
Do the same for the block INTERIOR WALL CLADDING 2 / Internal surface node /CTH.
Check the names of the parameters with the ones specified in the main block mask (see slide 6)