Professional Documents
Culture Documents
Crossfire Headliner
Crossfire Headliner
=RRP
6L]HGIRU3ULQW
1. Remove the dome lamp assembly (2) by gently prying off the lens using a trim stick (1) or equivalent.
=RRP
6L]HGIRU3ULQW
2. Remove the two retaining screws (1) and pull the dome lamp assembly from the headliner.
=RRP
6L]HGIRU3ULQW
3. Disconnect the dome lamp assembly harness connector (1) and remove the dome lamp assembly.
=RRP
6L]HGIRU3ULQW
4. Remove the universal garage door opener/TPM module (1) from the headliner using a trim stick or equivalent. Pull the module from the headliner and disconnect the harness connector. 5. Remove both the right and left sun visor assemblies.
=RRP
6L]HGIRU3ULQW
6. Remove the right and left A-pillar trim panels. 7. Tilt both seats all the way forward and all the way down.
=RRP
6L]HGIRU3ULQW
8. Disengage rear interior trim panel (2) retaining clips near headliner. 9. Remove the rear headliner retaining clips (1). 10. Remove the headliner from the passenger door opening. INSTALLATION 1. Install the headliner through the passenger door opening. 2. Install the sun visor assemblies. This will hold the headliner into the correct position.
=RRP
6L]HGIRU3ULQW
3. Install the rear headliner retainers (2). 4. Connect the rear interior trim panel retaining clips (1) near headliner.
=RRP
6L]HGIRU3ULQW
5. Install the right and left A-pillar trim panels (1). 6. Using a trim stick, reinstall head liner into upper window weather strips.
=RRP
6L]HGIRU3ULQW
7. Connect the universal garage door opener/TPM module (1) harness connector and install into the headliner.
=RRP
6L]HGIRU3ULQW
8. Connect the dome lamp assembly harness connector (1) and install into the headliner.
=RRP
6L]HGIRU3ULQW
9. Install the retaining screws (1). 10. Install the dome lamp assembly lens.