Professional Documents
Culture Documents
Edward Instructions
Edward Instructions
Edward Instructions
INSTRUCTIONS
CAUTION: Adult Assembly Required. Hardware contains small screws with sharp points. Keep the unassembled parts out of reach of small children. USE AND MAINTENANCE: Use on level surfaces only -Please check assembly at regular intervals, and frequently tighten hardware if neces- sary. If maintenance is not carried out, the product could cease to function properly WARNING: CHOKING HAZARD Small parts and sharp points, not suitable for children under 3 years.
Welcome!
Thank you for purchasing the Edward House from brinca dada. We hope you will enjoy this house as much as weve enjoyed designing it. Inspired by Neutras Kaufmann House and Gary Coopers home designed by A. Quincy Jones, brinca dadas Edward House features many distinguishing architectural features like glass corners, minimalist cut stone and hardwood floors. The Edward House has six rooms including a living room, kitchen, library/office, master bedroom, bathroom and childs bedroom. With its large, open floor plan and floor-to-ceiling windows, the Edward House enjoys year-round sunlight. Finally, the dollhouse is easy on the environment with only eco-friendly woods and non-toxic and lead-free paints. Enjoy!
Included Pieces
AV1 AV4 AV2 AV3 AV6 AV5 AV7 AV8 AV9 AV10 BV2 AV11 AV13 BV9 BV1 AV12 BH1 AV16 BH2 x65 x6 AH2 AV15 AH3 AH1
BV10
BV5
BV3
BH3
C2 C3 C4 C5 BV8 BH4
AV1
AV5 AH2 SIDE A Attach AV1 to AH1 using two (2) screws. AH1 Place AV5 between AH2 and AV3. Attach AV3 to AH2 using one (1) dowel (goes through the hole in AV5).
AV1 AH2
AV4 AH2 Place AV4 between AH2 and AV2. Attach AV2 to AH2 using one (1) dowel (goes through the hole in AV4). Attach AV2 to AH1 using one (1) screw. AH1 AV2
AV6
AV9
AV8
7
AH1
AV7
10
AH1
AH3 AV9
AV10
AV1
Place AV10, AV11 and AV12 into the slots in AH1. AH1 AV12 AV11
11
AH3
Attach AH4 to AV2, AV3 and AH3 using five (5) screws.
AV8 Attach AH5 to AV7, AV8 and AV9 using four (4) screws. AV7
12
AV2
AV3
13
BV2 AV14 BH1 Attach AV14 to AH1 using two (2) screws. Place BV6 into place in between BH1 and BV2. BV6 AH1
14
BV2
BH1
1
BV1
BV1
BH2
BV3
BH1
BH1 Attach BV3 to BH1 using two (2) screws. Attach BV5 to BH1 and BH2 using two (2) dowels and two (2) screws. BV5 BH2
BH3 BV3 BV2 BV10 Attach BH3 to BV2 and BV3 using four (4) screws. Attach BV7, BV8, BV9 and BV10 to BH1 using seven (7) screws. BH1 BV9
BV8 BV7
BV11 BV1 BH1 BV13 Slide BV4 into place in the grooves in BV1, BH1 and BH2. BV4 Slide windows BV11, BV12, BV13, BV14, BV15, BV16 and BV17 into place. BV15 BV14
BV17 BV16
7
BH2
BV12
10
10
11
BH4
BH3 BV8 Attach BH4 to BV1, BH3, BV8, BV9 and BV10 using nine (9) screws. BV1 Attach C2 to AV14 using dowel.
BV9
11
3
C2 AV14
AV14
CORNER
1
C4
C5
Attach C3 to AV14 using dowel. Attach C4 and C5 to C3 using three (3) screws. C3
4
C4 C5
C2
C1
C6
BV1
C4
12
13
AV15
AV16
For more product information and to see other brinca dada toys, please visit our website www.brincadada.com.