Professional Documents
Culture Documents
A Mini Project Synopsis On "Incoming Call Indicator"
A Mini Project Synopsis On "Incoming Call Indicator"
Amarnath namdev (07) Ashok Kushwaha (19) Abhitosh Yadav Kunwar singh (02) (55)
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGG. B.S.A. COLLEGE OF ENGINEERING & TECHNOLOGY MATHURA(UP) AFFILATED TO GBTU LUCKNOW 2012-2013
Introduction
This circuit can be used to escape from the nuisance of mobile phone rings when you are at home .This circuit will give a visual indication if placed near a mobile phone even if the ringer is deactivated. When a call is coming to the mobile phone ,the transmitter inside it become activated. The frequency of the transmitter is around 900Mhz . the coil L1 pick up those oscillations by induction and feds it to the base of Q1. This makes the transistor Q1 active . since the Collector of Q1 is connected to the pin 2 of IC1 (NE555) ,the IC1 is triggered to make the LED connected at its out pin3 to blink. The blinking of the LED is the induction of incoming call.
Circuit Diagram
The coil L1 can be made by making 150 turns of 36SWG enameled copper wire on a 5 mm dia plastic former The circuit can be powered from a 6V battery . Assemble the circuit on a good quality PCB . C1 &C2 are to be polyester capacitor . The electrolytic capacitor C2 must be rated
References
www.circuitstoday.com/mobile-incoming-call-indicator seminarprojects.com/.../mobile-incoming-call-indicator prabalyaeee.blogspot.com/.../project-for-batch-1mobile-incoming-cal... seminarprojects.net/q/mobile-incoming-call-indicator www.seminarprojects.net/cld.php?cloud...incoming-call-indicator.. seminarprojects.net/q/mobile-incoming-call-indicator-mini-project-pdf www.alibaba.com/showroom/call-indicator.html