Professional Documents
Culture Documents
Stereolithography
Stereolithography
Rapid Prototypes
What are they used for?
Experiments
Optical analysis Material properties
Prototype Installed
System Capabilities
Standard resolution build volume is a 10 inch cube. Layer depth will be 0.004 inch. Laser Beam Diameter 0.010 inch High resolution build volume is a 5 inch square 10 inches tall. Layer depth will be 0.002 inch. Laser Beam Diameter 0.003 inch
Nasal Passage
Original data source from 3mm section of human MRI. Each adjacent section connected in Mech. Desktop and Gambit (a CFD analysis package)
Bone Structure
STL Data produced from Micro-CT scan data Multiple specimens of identical structure can be made, reducing samples variations.