Professional Documents
Culture Documents
Linear
Linear
Linear
R
EDUCATIONAL & RESEARCH INSTITUTE
UNIVERSITY
Maduravoyal, Chennai 600095 APRIL / MAY -2012
1. Design an Opamp with gain of -10 and input resistance equal to 10kohm 2. CMRR should be high for a better Opamp.Justify this. 3. Write briefly about Trans conductance amplifier 4. How a precision diode can be used to clip off a certain portion of the input? 5. What is the function of a voltage regulator and explain its classifications? 6. What is voltage reference? Why is it needed? 7. What is fan-in.and fan-out? 8. Define Noise margin. 9. Define Shift register 10. What would be the MOD number of the counter consisting of three flipflops and if three more FFs were added to the counter circuit? PART: B (5 X 16 = 80)
11) To get larger bandwidth and lower closed loop gain, what is the suitable compensation techniques used? (or) 12) For the non-inverting Opamp of Ri 1kohm & Rf = 10kohm,Calculate a) the maximum output offset voltage due to Vos & Ib. The Opamp with Vos = 10mv & Ib = 300nA & Ios = 50nA. b) Calculate the value of Rcomp needed to reduce the effect of Ib 13) Explain the circuit that samples an input signal and holds the last sampled value. (or) 14) Explain free running oscillator. 15) Draw the functional diagram of 723 regulator and explain its current limiting feature. (or) 16) What is IC 555 timer and explain any one of its application 17) What is data selector, explain four- input data selector with logic circuitry and truth table. (or) 18) Explain the circuit which is used to generate coded output (BCD) from the active line 19) Explain about Johnsons counter. (or) 20) Explain about parallel counter