Professional Documents
Culture Documents
Tut Sheet
Tut Sheet
H(z)
H(Z M)
H(zL)
H(z)
3. An analog signal xa(t) is band limited to the range 900F1100 Hz. It is used as an input to the system shown in figure below. In this system H() is an ideal lowpass filter with cutoff frequency Fc=125 Hz. xa(t) x[n] w[n] v[n] y[n] 10 A/D H()
Converter
Fx=1/Tx=2500
cos(0.8)
Fy=1/Ty=250
4. Consider the signal x[n]=anu[n],a1< a) Determine the spectra of X(). b) The signal x[n] is applied to a decimator that reduces the rate by factor of 2. Determine the output spectra. 5. Consider the two different way of cascading a decimator with interpolator shown in figure below: x[n] I D y1[n] x[n] D I y2[n]
I. II.
If D=I, show that the outputs of two configurations are different. Hence in general the two systems are not identical. Show that the two systems are identical if and only D and I are relatively prime.