Professional Documents
Culture Documents
MPLS Lab Configurations
MPLS Lab Configurations
Password:xxxxx
P-1>en
Password:xxxxx
P-1# conf t
Enter configuration commands, one per line. End with CNTL/Z.
P-1(config)#hostname Khulna-PE
Khulna-PE(config)#interface GigabitEthernet2/2
Khulna-PE(config-if)# ip address 172.16.16.46 255.255.255.252
Khulna-PE(config-if)#no shut
Khulna-PE(config-if)#end
Khulna-PE#write memory
Building configuration...
[OK]
Khulna-PE#
Password:xxxxx
P-1>en
Password:xxxxx
P-1# conf t
Enter configuration commands, one per line. End with CNTL/Z.
P-1(config)#hostname Bogra-PE
Bogra-PE(config)#interface GigabitEthernet2/2
Bogra-PE(config-if)# ip address 172.16.16.50 255.255.255.252
Bogra-PE(config-if)#no shut
Bogra-PE(config-if)#end
Bogra-PE#write memory
Building configuration...
[OK]
Bogra-PE#
Password:xxxxx
P-2>en
Password:xxxxx
P-2# conf t
Enter configuration commands, one per line. End with CNTL/Z.
P-2(config)#hostname COMILLA
COMILLA(config)#interface GigabitEthernet2/2
COMILLA(config-if)# no shutdown
COMILLA(config-if)#ip add 172.16.16.33 255.255.255.252
COMILLA(config-if)#end
COMILLA#write memory
Building configuration...
[OK]
COMILLA#
Password:xxxxx
P-2>en
Password:xxxxx
P-2# conf t
Enter configuration commands, one per line. End with CNTL/Z.
P-2(config)#hostname SYLHET
SYLHET(config)#interface GigabitEthernet2/2
SYLHET(config-if)#no shutdown
SYLHET(config-if)#ip add 172.16.16.37 255.255.255.252
SYLHET(config-if)#end
SYLHET#write memory
Building configuration...
[OK]
SYLHET#
Password:xxxxx
PE-1>en
Password:xxxxx
PE-1# conf t
Enter configuration commands, one per line. End with CNTL/Z.
PE-1(config)#hostname BARISHAL
BARISHAL(config)#interface GigabitEthernet3/1
BARISHAL(config-if)#no shutdown
BARISHAL(config-if)#ip add 172.16.16.54 255.255.255.252
BARISHAL(config-if)#interface GigabitEthernet2/2
BARISHAL(config-if)# description ** P-3-PE-1 GigE link **
BARISHAL(config-if)# ip address 172.16.16.34 255.255.255.252
BARISHAL(config-if)# no shutdown
BARISHAL(config-if)# end
BARISHAL#write memory
Building configuration...
[OK]
BARISHAL#
Password:xxxxx
PE-1>en
Password:xxxxx
PE-1# conf t
Enter configuration commands, one per line. End with CNTL/Z.
PE-1(config)#hostname RAJSHAHI
RAJSHAHI(config)#interface GigabitEthernet3/1
RAJSHAHI(config-if)#no shutdown
RAJSHAHI(config-if)#ip add 172.16.16.58 255.255.255.252
RAJSHAHI(config-if)#interface GigabitEthernet2/2
RAJSHAHI(config-if)# description ** P-3-PE-1 GigE link **
RAJSHAHI(config-if)# ip address 172.16.16.38 255.255.255.252
RAJSHAHI(config-if)# no shutdown
RAJSHAHI(config-if)# end
RAJSHAHI#write memory
Building configuration...
[OK]
RAJSHAHI#
Password:xxxxx
PE-2>en
Password:xxxxx
PE-2# conf t
Enter configuration commands, one per line. End with CNTL/Z.
PE-2(config)#hostname PABNA
PABNA(config)#controller e1 4/0/0
PABNA(config- controller)#channel group 0 time-slot 1-31
PABNA(config- controller)#exit
PABNA(config)#interface serial 4/0/0:0
PABNA(config-if)# no shutdown
PABNA(config-if)# ip add 172.16.16.65 255.255.255.252
PABNA#write memory
Building configuration...
[OK]
PABNA#
Password:xxxxx
PE-2>en
Password:xxxxx
PE-2# conf t
Enter configuration commands, one per line. End with CNTL/Z.
PE-2(config)#hostname KISHORGANJ
KISHORGANJ(config)#controller e1 4/0/0
KISHORGANJ(config- controller)#channel group 0 time-slot 1-31
KISHORGANJ(config- controller)#exit
KISHORGANJ(config)#interface serial 4/0/0:0
KISHORGANJ(config-if)# no shutdown
KISHORGANJ(config-if)# ip add 172.16.16.66 255.255.255.252
KISHORGANJ#write memory
Building configuration...
[OK]
KISHORGANJ#
Password:xxxxx
P-3>en
Password:xxxxx
P-3# conf t
Enter configuration commands, one per line. End with CNTL/Z.
P-3(config)# hostname DHAKA-P
DHAKA-P(config)# interface GigabitEthernet 7/0/0
DHAKA-P(config-if)# ip address 172.16.16.41 255.255.255.252
DHAKA-P(config-if)# no shutdown
DHAKA-P(config-if)# interface GigabitEthernet 7/0/1
DHAKA-P(config-if)# ip address 172.16.16.45 255.255.255.252
DHAKA-P(config-if)# no shutdown
DHAKA-P(config-if)# interface GigabitEthernet 7/1/0
DHAKA-P(config-if)# ip address 172.16.16.53 255.255.255.252
DHAKA-P(config-if)# no shutdown
DHAKA-P(config-if)# interface GigabitEthernet 7/1/1
DHAKA-P(config-if)# ip address 172.16.16.61 255.255.255.252
DHAKA-P(config-if)# no shutdown
DHAKA-P(config-if)# interface loopback 0
DHAKA-P(config-if)# ip address 192.168.8.254 255.255.255.255
DHAKA-P(config-if)#end
DHAKA-P#wr
Building configuration...
[OK]
DHAKA-P#
Password:xxxxx
P-3>en
Password:xxxxx
P-3# conf t
Enter configuration commands, one per line. End with CNTL/Z.
P-3(config)# hostname CHITTAGONG-P
CHITTAGONG-P(config)# interface GigabitEthernet 7/0/0
CHITTAGONG-P(config-if)# ip address 172.16.16.42 255.255.255.252
CHITTAGONG-P(config-if)# no shutdown
CHITTAGONG-P(config-if)# interface GigabitEthernet 7/0/1
CHITTAGONG-P(config-if)# ip address 172.16.16.49 255.255.255.252
CHITTAGONG-P(config-if)# no shutdown
CHITTAGONG-P(config-if)# interface GigabitEthernet 7/1/0
CHITTAGONG-P(config-if)# ip address 172.16.16.58 255.255.255.252
CHITTAGONG-P(config-if)# no shutdown
CHITTAGONG-P(config-if)# interface loopback 0
CHITTAGONG-P(config-if)# ip address 192.168.9.254 255.255.255.255
CHITTAGONG-P(config-if)#end
CHITTAGONG-P#wr
Building configuration...
[OK]
CHITTAGONG-P#
DHAKA-P
Password:xxxxx
DHAKA-P >en
Password:xxxxx
DHAKA-P # conf t
CHITTAGONG-P
Password:xxxxx
CHITTAGONG-P >en
Password:xxxxx
CHITTAGONG-P # conf t
Enter configuration commands, one per line. End with CNTL/Z.
KHULNA-PE
Password:xxxxx
KHULNA-PE >en
Password:xxxxx
KHULNA-PE # conf t
Enter configuration commands, one per line. End with CNTL/Z.
Bogra-PE
Password:xxxxx
Bogra-PE >en
Password:xxxxx
Bogra-PE # conf t
Enter configuration commands, one per line. End with CNTL/Z.
BARISHAL
Password:xxxxx
BARISHAL >en
Password:xxxxx
BARISHAL # conf t
Enter configuration commands, one per line. End with CNTL/Z.
RAJSHAHI
Password:xxxxx
RAJSHAHI >en
Password:xxxxx
RAJSHAHI # conf t
Enter configuration commands, one per line. End with CNTL/Z.
COMILLA
Password:xxxxx
COMILLA >en
Password:xxxxx
COMILLA # conf t
Enter configuration commands, one per line. End with CNTL/Z.
SYLHET
Password:xxxxx
SYLHET >en
Password:xxxxx
SYLHET # conf t
Enter configuration commands, one per line. End with CNTL/Z.
SYLHET (config)#
PABNA-PE
Password:xxxxx
PABNA-PE >en
Password:xxxxx
PABNA-PE # conf t
Enter configuration commands, one per line. End with CNTL/Z.
PABNA-PE(config-if)# mpls ip
PABNA-PE(config-if)# mpls label protocol ldp
PABNA-PE(config-if)#end
PABNA-PE#wr
Building configuration...
[OK]
PABNA-PE#
KISHORGANJ
Password:xxxxx
KISHORGANJ >en
Password:xxxxx
KISHORGANJ # conf t
Enter configuration commands, one per line. End with CNTL/Z.
End of Document