Professional Documents
Culture Documents
Beam
Beam
Papak yang digunakan adalah papak konkrit dituang disitu (insitu concrete slab). Beban mati tidak termasuk berat sendiri rasuk dan beban hidup yang bertindak pada papak ditunjukkan dalam rajah. Rasuk 2/A-B juga menanggung dinding bata setinggi 4m. Diberi berat bata = 3 kN/m2. Rekabentuk rasuk 2/A-B.
Slab A-B/2-3
Slab A-B/2-3
Brick wall
Analisis :Calculate the maximum bending moment and shear force for beams
Slab A-B/1-2
aL = 2; a =0.29
Slab A-B/2-3
Brick wall
Rekabentuk Rasuk Assume S275, Hence fy for grade S275 steel (to EN 10025-2) is 275 N/ Initial Size
Try 406
178
60 S275
Hence for a nominal thickness, From Table 3.1, nominal values of yield strength fy for grade S275 steel (to EN 10025-2) is 275 N/
From Table 5.2, sheet 2 Outstand flanges, Limit for Class 1 flange
Overall cross-section classification is therefore Class 1 Bending resistance of cross-section (Clause 6.2.5)
For rolled I section, loaded parallel to the web, the shear area, Av is given by;
OK
Deflection Check deflections under unfactored imposed load (UK National Annex)
Assume deflection limit Actual deflection, mm < deflection limit, 19.4 mm, therefore deflection is OK