Download as pptx, pdf, or txt
Download as pptx, pdf, or txt
You are on page 1of 12

Online Condition Monitoring of High-Voltage Overhead Power Lines

By: Prashanth G R USN : 2BV09EE039

Need for Online Condition Monitoring


Sag of High-Voltage OH power lines may limit the

operability of power lines. Heavy loads due to icing or vibrations excited by the wind streams increase the risk of line breakage.

Dept. of Elecrtical & Electronics Engg., BVBCET

Basic Idea of Condition Monitoring System

Dept. of Elecrtical & Electronics Engg., BVBCET

Harvester Prototype
It comprises of tube with a diameter of 30cm &

length 50cm. It is mandatory to eliminate sharp edges to avoid partial discharge. Donut-shaped objects are placed at the ends of the tubes.

Dept. of Elecrtical & Electronics Engg., BVBCET

Harvesting System

Cross Sectional View


5 Dept. of Elecrtical & Electronics Engg., BVBCET

3-D Model

Schematic of Energy Harvester Circuitry

Dept. of Elecrtical & Electronics Engg., BVBCET

Experimental Setup & Results

Dept. of Elecrtical & Electronics Engg., BVBCET

Operability of Electronic Devices

Dept. of Elecrtical & Electronics Engg., BVBCET

Testing
1.

High currents

2. Discharge & Transient Voltage

Dept. of Elecrtical & Electronics Engg., BVBCET

Communication to a Control Station


System Requirements:
It should collect data autonomously. It should provide the comprehensive view of

supervised line. Approaches for establishing communication link between monitoring system and control station: 1. Use of conductor for wire bound communication . (Outdated) 2. Wireless Communication system. (Present System)
Dept. of Elecrtical & Electronics Engg., BVBCET

10

Conclusion

11

Dept. of Elecrtical & Electronics Engg., BVBCET

12

Dept. of Elecrtical & Electronics Engg., BVBCET

You might also like