Professional Documents
Culture Documents
Example of Jig Usage
Example of Jig Usage
Example of Jig Usage
http://www.davehylands.com/Machinist/CNC/Wheel-Widener-2/
Swarf removed
Here's the part mounted in the jig, with the swarf removed. Bigger...
Jig
And here's a photo of the jig itself. The recess is about 0.060" deep, and the diameter of the circle is 1.4". The "slot" coming out at an angle was machined at the same time and to the same depth as the recess. This allows a spot for my feeler gauge when I want to refernce to the surface. There's still some more machining to do, so the the 0.060" deep side walls are deep enough that I can use an indicator to get things lined back up again when the time comes. I also machined a 1/16" groove all around the base of the outside wall so that the part wouldn't get caught in a not quite square corner (between the flat bottom and side walls). Bigger...
1 of 2
10-12-2012 23:51
http://www.davehylands.com/Machinist/CNC/Wheel-Widener-2/
Ready to Taper
The hub is now ready to have the taper machined. Bigger...
Finished Taper
The taper is all done. Bigger...
Assorted Pieces
Here's some of the pieces and how they fit together. The black portion at the top is the disc brake mechanism (testing for fit). Bigger...
2 of 2
10-12-2012 23:51