Professional Documents
Culture Documents
Support Bed (Stainless-Steel-304) : Reactions
Support Bed (Stainless-Steel-304) : Reactions
70 200 3
Reactions
Shearing forces
Moments
Between A and B: )
Estimate, Ssn = 0.577Sn and Ssu = 0.75 Su In general, the bending stress in the bar will be computed from the flexure formula: Where S=I/C M = Bending moment S = Section modulus of the cross section of the bar
The stresses will be found from and . Material factor,Cm: Use Cm = 1.0 for the wrought, hot-rolled steel. Stress-type factor, Cst : Use Cst = 1.0 for repeated bending stress. Reliability factor, CR : A high reliability is desired. Lets use CR = 0.75 to achieve a reliability of 0.999