Professional Documents
Culture Documents
Preliminary: Typical Applications
Preliminary: Typical Applications
Preliminary: Typical Applications
Pb-Free Product Typical Applications 802.11b/g/n Access Points PCS Communication Systems 2.4GHz ISM Band Applications Product Description
The RF5263 is a linear, medium-power, high-efficiency amplifier IC designed specifically for low voltage operation. The device is manufactured on an advanced InGaP Heterojunction Bipolar Transistor (HBT) process, and has been designed for use as the final RF amplifier in 802.11g/n access point transmitters. The device is provided in a 4mmx4mm, 16-pin, leadless chip carrier with a backside ground. The RF5263 is designed to maintain linearity over a wide range of supply voltage and power output.
-A2 PLCS 0.10 C A
RF5263
3.3V TO 5.0V, 2.5GHz LINEAR POWER AMPLIFIER
Commercial and Consumer Systems Portable Battery-Powered Equipment Broadband Spread-Spectrum Systems
0.05 C
0.70 0.65
12 MAX
0.10 C B 2 PLCS -B-C-
SEATING PLANE
0.10 M C A B
0.60 0.24
TYP
0.35 0.23
Pin 1 ID 0.20 R
Features Single 3.3V or 5.0V Power Supply 34dB Small Signal Gain (typ.) <2% EVM (RMS) 54Mbps @ +26dBm Separate Power Detect/Power Down Pins 2400MHz to 2500MHz Frequency Range
16 BIAS VCC 1
1 Stage
st
15
14
13 12 RF OUT
nd
3 Stage
rd
RF IN 2
11 RF OUT
P DOWN 3
Detector Bias
10 RF OUT
Ordering Information
RF5263
9 GND 8 PDETECT
3.3V to 5.0V, 2.5GHz Linear Power Amplifier, Matte-Sn (Pb-free) Finish RF5263PCBA-41X Fully Assembled Evaluation Board
Rev A0 061002
2-627
RF5263
Preliminary
Please contact RF Micro Devices Applications Engineering at (336) 678-5570 for more information.
2-628
Rev A0 061002