Professional Documents
Culture Documents
PROPOSAL - Bill of Material: Millennium Industrial Manufacturing, Inc
PROPOSAL - Bill of Material: Millennium Industrial Manufacturing, Inc
750 Jackson st Benicia, Ca. 94510 (707) 748-7841 (Ph.) (707) 748-7835 (Fax)
Design Requirements
Lube Oil: ISO VG32 Flow (GPM): up to 12 gpm Header Pressure (psig): 20 Heat load (Btu/Hr): Tank Fill Capacity (Gal): Maximum: Normal: Minimum:
Rev
Description REVISIONS
Approved
Date
Drawing No.:
Drawn By:
Date:
API-610
Page 1 of 3
1/13/2013
Description
Tag No.
Oil Reservoir - Millennium model 2000, stain. steel, retention capacity (3 minutes), top mounted pump. Filler/Breather - Hydro Craft, HC120 (or equal), Gate Valve - Vogt 12111, Steel body with 13% chrome trim, O S & Y,bolted bonnet & gland, 1" npt Level Gauge - Millennium weld pad reflex type
3 4
1 1
LG
Lube Oil Pump - Imo (or equal), C.I. Body, vertical mount
9 10
1 2
Coupling - Lovejoy L095 Foot Valve/Strainer - Flomatic model 60SE-4101, ss screen and spring, brass body. Relief Valve - Fulflo, Steel Body
11
PSV
12
PCV
13
Check Valve - Vogt 701, (or equal), piston type, steel body with 13% chrome trim.
Page 2 of 3
1/13/2013
Description
Heat Exchanger - Thermal Transfer (or equal), shell and tube type, carbon steel shell, C.I. bonnets, copper tubes. Filter - Hilco (or equal), duplex type with integral transfer valve Pressure Indicator - Ashcroft (or equal) 4.5" dial Range: 0-60 psig, 0-30 psig
Tag No.
15
16
PI-1, 2
17
TI-1
Temperature Indicator - Ashcroft (or equal) 5" dial, range: 0-250 degrees F Thermowell - stainless steel Block/Bleed Valve - AGCO (or equal) Reservoir Heater - Optional Pressure Switch - United Electric (or equal) PSL-1, Low Pressure Alarm - set at 12 psig incr. PSL-2, Aux. Pump Start - set at 10 psig decr. PSL-3, Low Press. Trip - set at 8 psig decr. Piping/Fittings - buttweld stainless steel with stainless steel slip-on flanges Tubing/Fittings - Swagelok stainless steel threaded
18 19 20 21
TW
2 7
H PSL-1,2,3
1 3
22
23
Page 3 of 3