Professional Documents
Culture Documents
Interpretation: 4-15: ASME B16.5-2003 4-15, 4-16, 4-17
Interpretation: 4-15: ASME B16.5-2003 4-15, 4-16, 4-17
5-2003
Interpretation: 4-15 Subject: Lapped Joint Flanges Thickness Date Issued: February 1, 2002 File: B16-C-01-02 Question: What minimum thickness does ASME B16.5-1996, 1998 Addenda (a), require for lapped joint flanges? Reply: Dimension C as shown in Tables 9, 12, 15, 18, 21, 24, and 27. See para. 7.4 for tolerance.
Interpretation: 4-16 Subject: Marking Requirements Date Issued: February 20, 2002 File: B16-C-01-03 Question (1): According to B16.5-1996, 1998 Addenda (a), is it required that the designation B16 or the designation B16.5 be marked on the flange? Reply (1): It is required that B16 be marked on the flange. See para. 4.1.4. Question (2): Does marking B16.5 in lieu of B16, as required, render the flange nonconforming to ASME B16.5-1996, 1998 Addenda (a)? Reply (2): No.
Interpretation: 4-17 Subject: Flange Thickness Date Issued: September 2, 2002 File: 02-02830 Question: According to ASME B16.5-1996 edition, 1998 Addenda (a), is it acceptable for the flange thickness to taper to the edge and be thinner than the flange thickness C dimension listed in the dimensional tables? Reply: No. See para. 7, Tolerances.
I-6