Professional Documents
Culture Documents
Retainwall: Dimensions
Retainwall: Dimensions
Version 2.60
Copy right 1996 - 2011, Dhani Irwanto - http://javasoft-softwares.com/retainwall.htm All rights reserved. This software is not a licensed version, intentional glitches are inserted. Visit above website to obtain the licensed version.
Dimensions
1.40
1.40
2.85 3.40
2.85
0.55
0.55
0.65
3.90 4.50
0.60
Dimensions in m
Properties
Backfill earth: - Unit weight () = - Dry density (d) = - Saturated density (s) = - Internal friction angle () = - Pressure = - Minimum equivalent-fluid density = Base: - Internal friction angle () = - Cohesion (c) = - Material = - Nominal bearing capacity (qn) = Toe earth: - Unit weight () = - Dry density (d) = - Saturated density (s) = - Internal friction angle () = Water: - Unit weight (w) = Friction angle (): - Earth to earth = - Concrete to earth = Concrete: - Unit weight (incl. reinforcement) = - Compressive stress (f'c) = - Elasticity modulus (Ec) = - Poisson's ratio () = Reinforcement bars: - Yield stress (fy) = - Elasticity modulus (Es) = - Concrete cover =
1.60 T/m 1.37 T/m 1.69 T/m 16.0 Active N/A T/m
1.00 T/m
16.0 16.0
Page 1
RetainWall
Version 2.60
Copy right 1996 - 2011, Dhani Irwanto - http://javasoft-softwares.com/retainwall.htm All rights reserved. This software is not a licensed version, intentional glitches are inserted. Visit above website to obtain the licensed version.
Loads
Combinations: ASD/Unfactored, Sliding and excentricity DL EV EH ES LL LD WA EQ IC S1 S2 Load Factors 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 -- 1.00 Resistance Factors BE FC EP RH EX RO OS 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.45 1.45 WA 0.20LL 0.10
1.45 WA
1.45
5.71EV 1.17
1.83 WA
2.00
Loads
Combinations: ASD/Unfactored, Bearing and reinforcement DL EV EH ES LL LD WA EQ IC S1 S2 Load Factors 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 Resistance Factors BE FC EP RH EX RO OS 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.45 1.45 WA 0.20LL 0.10 0.20LL
1.45 WA
1.45
5.71EV 1.17
1.83 WA
2.00
Page 2
RetainWall
Version 2.60
Copy right 1996 - 2011, Dhani Irwanto - http://javasoft-softwares.com/retainwall.htm All rights reserved. This software is not a licensed version, intentional glitches are inserted. Visit above website to obtain the licensed version.
15.65R
3.89
11.59
4.66
16.14R
3.89
11.74
4.92
Page 3
RetainWall
Version 2.60
Copy right 1996 - 2011, Dhani Irwanto - http://javasoft-softwares.com/retainwall.htm All rights reserved. This software is not a licensed version, intentional glitches are inserted. Visit above website to obtain the licensed version.
Stabilities
Sliding and excentricity Load combinations ASD/Unfactored Stability Eccentricity (overturning) - Horizontal (T) - Vertical (T) - Moment at overturning point (Tm) - Moment at midbase (Tm) - Eccentricity from overturning point (m) - Eccentricity from midbase (m) - Criterion, criterion/eccentricity ratio Bearing pressure - Left (T/m) - Right (T/m) - Pressure width (m, %) - Factored bearing resistance (T/m) - Resistance/load ratio Sliding - Sliding force (T) - Resisting force (T) - Resistance/load ratio Rotation - Rotating moment (Tm) - Resisting moment (Tm) - Resistance/load ratio 21.57 60.07 2.78 21.57 61.71 2.86 3.89 12.82 3.30 3.89 12.97 3.33 2.08 4.66 4.50, 100.0% 8.50 1.83 2.05 4.92 4.50, 100.0% 8.50 1.73 3.89 15.16 38.45 4.34 2.54 0.29 1 B, 7.86 3.89 15.67 40.09 4.84 2.56 0.31 1 B, 7.29 1DL+1EV+1EH+1ES +1LL+1LD+1WA+1EQ +1IC+1S2 Stable Bearing and reinforcement 1DL+1EV+1EH+1ES +1LL+1LD+1WA+1EQ +1IC+1S1+1S2 Stable
Moment diagram
Combinations: ASD/Unfactored, Sliding and excentricity DL EV EH ES LL LD WA EQ IC S1 S2 Load Factors 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 -- 1.00 Resistance Factors BE FC EP RH EX RO OS 1.00 1.00 1.00 1.00 1.00 1.00 1.00
-0.31
Moments in Tm/m
Page 4
RetainWall
Version 2.60
Copy right 1996 - 2011, Dhani Irwanto - http://javasoft-softwares.com/retainwall.htm All rights reserved. This software is not a licensed version, intentional glitches are inserted. Visit above website to obtain the licensed version.
-0.75
Forces in T/m
1.26
0.95
1.80
1.90
Forces in T/m
Page 5
RetainWall
Version 2.60
Copy right 1996 - 2011, Dhani Irwanto - http://javasoft-softwares.com/retainwall.htm All rights reserved. This software is not a licensed version, intentional glitches are inserted. Visit above website to obtain the licensed version.
Moment diagram
Combinations: ASD/Unfactored, Bearing and reinforcement DL EV EH ES LL LD WA EQ IC S1 S2 Load Factors 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 Resistance Factors BE FC EP RH EX RO OS 1.00 1.00 1.00 1.00 1.00 1.00 1.00
-0.40
Moments in Tm/m
-0.88
Forces in T/m
Page 6
RetainWall
Version 2.60
Copy right 1996 - 2011, Dhani Irwanto - http://javasoft-softwares.com/retainwall.htm All rights reserved. This software is not a licensed version, intentional glitches are inserted. Visit above website to obtain the licensed version.
1.26
0.95
1.78
1.90
Forces in T/m
Reinforcements
Bending moment, Mu Member Length (m) Load combinations: ASD/Unfactored Sliding and excentricity 1DL+1EV+1EH+1ES+1LL+1LD+1WA+1EQ+1IC+1S2 Bearing and reinforcement 1DL+1EV+1EH+1ES+1LL+1LD+1WA+1EQ+1IC+1S1+1S2 For section strength design Corresponding Pu (T/m) Distance from end (m) Mu-----Upper stem 0.00 Mu+ -----Mu-2.38 -2.77 -2.77 3.40 2.85 Lower stem 2.85 Mu+ -----Mu-0.01 -0.01 -0.01 0.95 0.00 Toe 1.35 Mu+ 0.57 0.58 0.58 1.78 1.35 Mu-0.02 -0.02 -0.02 1.90 0.00 Unit: Tm/m Heel 2.55 Mu+ 3.06 3.09 3.09 -0.69 2.55
Page 7
RetainWall
Version 2.60
Copy right 1996 - 2011, Dhani Irwanto - http://javasoft-softwares.com/retainwall.htm All rights reserved. This software is not a licensed version, intentional glitches are inserted. Visit above website to obtain the licensed version.
Reinforcements
Shearing forces, Vu Member Length (m) Load combinations: ASD/Unfactored Sliding and excentricity 1DL+1EV+1EH+1ES+1LL+1LD+1WA+1EQ+1IC+1S2 Bearing and reinforcement 1DL+1EV+1EH+1ES+1LL+1LD+1WA+1EQ+1IC+1S1+1S2 For section strength design Corresponding Pu (T/m) Distance from end (m) Upper stem 0.00 Vu -----Lower stem 2.85 Vu 1.78 2.00 2.00 2.42 2.25 Toe 1.35 Vu 0.43 0.43 0.43 1.42 0.80 Unit: T/m Heel 2.55 Vu 1.10 1.10 1.10 1.90 0.00
Page 8