Professional Documents
Culture Documents
Forge Steel
Forge Steel
Forge Steel
Please visit our DHV website: www.dhvindustries.com or www.dhvvalve.com for a copy of our API 6D
monogram certificate. Customer and Project referrals are available upon request. For certified data
and current specifications, please contact us or your local DHV agent. Information provided in this
DHV reserves the right to discontinue the manufacture or change and modify our design and construction of any DHV product, in due course of our manufacturing procedure without incurring any obligation
to accept for credit, to replace or furnish or install such changes or modifications on products previously
Website: www.dhvvalve.com
or subsequently sold.
Table of Contents
Quotation
Introduction
All prices are F.O.B. shipping point unless otherwise agreed or specified in the quotation. Prices are
valid only for the duration indicated in the quotation and are subject to change without notice. Prices
also do not include any federal, state or local taxes or other government charges.
Quality is our commitment, while competitive price and timely delivery is our promise.
From the beginning, the DHV name has become associated with quality in every step of our
manufacturing process. For the past decades our customers worldwide have trusted us to provide
Design changes
We reserve the right to institute changes in material ,design and specification without notice.
them with consistent and reliable valve products in their most severe and critical service.
We at DHV are proud of our ability to meet the stringent requirements of Refining, Gas/Oil, Pipeline,
Cancellation or changes
Orders placed with us are not subject to cancellation or changes without our prior consent. A cancel-
DHV Forged Steel Valves are designed, manufactured and tested to the latest manufacturing
specifications of the American & International Standards Organizations. We welcome your chal-
Delivery
We will not be responsible for delays or failure to deliver due to causes beyond our control.Delivery of
material to a common carrier shall be considered delivery to the Buyer .Claims for loss or any dam-
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Connection Ends
Flanged End & Buttweld End
Taper Pipe Thread End (NPT) and Socket Weld End (S.W)
24
25
26
age to material in transit shall be filed by the Buyer direct with the carrier. Claims for any shortage,
corrections or deductions must be made in writing within 10 days after receipt of goods.
Return of goods
Any return of goods will not be accepted without our prior authorization.Return goods should be of
our manufacture, in clean and salable condition. A minimum charge of 35 percent of the invoice price
will be made to cover the cost of handling and reconditioning. The freight for return goods shall be
prepaid by Buyer.
Limited warranty
DHV Industries,Inc. warrants to the original Buyer, not any third party, for products of our manufacture, for a period of one year after date of shipment, that its products will be free from defects in
materials and workmanship under proper and normal use.
Any claim for defect goods should be by written notice to DHV Industries,Inc. immediately upon
discovery. NO warranty shall apply to our product which has been modified or changed in design or
function, misused, or impropery maintained. DHV Industries,Inc.shall be able to inspect claimed
defects at original buyers facility to determine its obligation.Without authorization of DHV Industries,
Inc. any repair labor or material is not allowed. No goods may be returned without permission from
DHV Industries,Inc.
This warranty does not extend beyond original sale price and does not extend to any claim for labor.
Consequential damages, losses,whether directly or indirectly suffered or in any other manner relating
to the defects.
26
Ty p e
1 = Gate
2 = ASTM A182 F5
3 = ASTM A350 LF3
2 = Globe
3 = Y Pattern Globe
4 = Piston Check
5 = Lift Check With Spring
Tolerance on Product.
Eo = D-(0.050D+1.1)p
p = Pitch
E1(d) = Eo+0.0625L1
L2 = (0.80+6.8)p
Dimensions in inches
P
Eo
E1 (a)
L1 (b)
L2 (c )
Normal
pipe size
Outside
diameter
of pipe
D
Number
of threads
per inch
Pith
of thread
Pich diameter
at beginning
of external
thread
Pich diameter
at end
of external
threads
Normal
engagement by
and between
external and
internal threads
Lengh
of effective
external thread
Height
of thread
1/16
1/8
0.3125
0.405
27
27
0.03704
0.03704
0.27118
0.36351
0.28118
0.37360
0.160
0.1615
0.2611
0.2639
0.02963
0.02963
1/4
3/8
0.540
0.675
18
18
0.05556
0.05556
0.47739
0.61201
0.49163
0.62701
0.2278
0.240
0.4018
0.4078
0.04444
0.04444
1/2
3/4
0.840
1.050
14
14
0.07143
0.07143
0.75843
0.96768
0.77843
0.98887
0.320
0.339
0.5337
0.5457
0.05714
0.05714
1
11/4
1.315
1.660
11.5
11.5
0.08696
0.08696
1.21363
1.55713
1.23863
1.58338
0.400
0.420
0.6828
0.7068
0.06957
0.06957
11/2
2
1.900
2.375
11.5
11.5
0.08696
0.08696
1.79609
2.26902
1.82234
2.29627
0.420
0.436
0.7235
0.7565
0.06957
0.06957
Code
Pressure Class
15 = Class 150
30 = Class 300
40 = Class 400
60 = Class 600
80 = Class 800
90 = Class 900
6 = Swing Check
7 = Y Pattern Check
8 = Needle Globe
9 = Cryogenic Gate
0 = Cryogenic Globe
X = Special
B = Ball Valves
W = Wellhead Valves
WB = Wafer Butterfly Valves
E x a m p l e : 2- F180 0 S 21
End Connection
Above information extracted from American National Standard for Pipe Threads,
ANSI B1.20.1
DEPTH
DIA
Dimensions
Normal
Pipe Size
NPS
DN
1/4
8
3/8
10
1/2
15
3/4
20
1
25
11/4
32
11/2
40
2
50
Socket Depth
Min.
inch
mm
0.38
9.6
0.38
9.6
0.38
9.6
0.50
12.7
0.50
12.7
0.50
12.7
0.50
12.7
0.62
15.8
Trim Material
Seat
Disc
Stem
1 = 13CR
2 = HF
13CR
HF
F6
F6
3 = HF
4 = MONEL
13CR
F6
MONEL MONEL
5 = 316SS
6 = HF
316SS F316
MONEL MONEL
7 = HF
8 = 304SS
316SS
304SS
F316
F304
9 = 304L
0 = 316L
304L
316L
304L
316L
A = F51
F51
B = Inconel 625
X = Special
F51
Bonnet Connection
1 = Bolted Bonnet - Full Bore
2 = Welded Bonnet - Full Bore
3 = Bolted Bonnet - Reduced Bore
4 = Welded Bonnet - Reduced Bore
Part
No.
Part Name
Carbon Steel
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Body
Bonnet
Stem
Disc
Seat Ring
Bonnet Bolt (a)
Gasket
Gland
Packing
Gland Flange
Gland Bolt
Gland Bolt Nut
Gland Bolt Pin
Sleeve
Sleeve Washer
Handwheel
Nameplate
Handwheel Nut
Alloy Steel
A 105
(b, c)
A 105
A 105
A350
LF2
F5
F11(d) F22
LF2
F5
F11
F22
LF2
F5
F11
F22
A276 - 410
A276 - 420
A276 - 410 + STL
A193 - B7 A320 - L7
A193 - B16
304 + Graphite
A276 - 410
Flexible Graphite
A105
LF2
F11
A193-B7 A320-L7
A193 - B16
A194-2H
A194-7
A194 - 4
A276 - 410
Stainless Steel
A182
F304 (e)
F304L
F304
F304L
F304
F304L
A276 - 304 A276 - 304L
304 + STL 304L + STL
304 + STL 304L + STL
A193 - B8
A276 - 304
F316(e)
F316
F316
A276 - 316
316 + STL
316 + STL
F316L
F316L
F316L
A276 - 316L
316L + STL
316L + STL
A193 - B8M
316 + Graphite
A276 - 316
PTFE
CF8
A193 - B8 / B8M
A194 - 8
A276 - 304
F51
F51
F51
F51
F51
F51
F51
F51
F51
A276 - 410
A276 - 410
A197
Aluminum
304
A108 - 1020
mm
35
in.
1.38
mm
11.5
in. mm
0.44
43
51
1.69
2.00
13.0
14.3
0.50
0.56
64
73
2.50
2.88
15.8
17.5
92
35
3.62
1.38
43
51
64
Number
of Bolts
in.
mm in.
16 0.62
16
16
0.62
0.62
0.62
0.69
16
16
0.62
0.62
19.5
14.3
0.75
0.56
20
16
0.75
0.62
1.69
2.00
2.50
15.8
17.5
19.5
0.62
0.69
0.75
20
20
20
0.75
0.75
0.75
73
92
2.88
3.62
20.6
22.5
0.81
0.88
22
20
0.88
0.75
35
43
1.38
1.69
14.3
15.8
0.56
0.62
16
20
0.62
0.75
51
64
2.00
2.50
17.5
20.6
0.69
0.81
20
20
0.75
0.75
73
92
2.88
3.62
22.5
25.4
0.88
1.00
22
20
0.88
0.75
1.6
1.6
6.4
0.06
0.06
0.25
Notes:
a. Temperature limitations on bolting are as following:
Gr B7,1000F(538C); Gr L7,1000F(538C);
Gr B16,1100F(595C); Gr B8-CL1,1500F(816C);
Gr B8M-CL1,1500F(816C); Gr B8-CL2,1000F(538C);
and Gr B8M-CL2,1000F(538C).
b. Upon prolonged exposure to temperatures above
800F(425C), the carbide phase of carbon steel
may be converted to graphite.
c. Only killed steel shall be used above 850F(455C).
d. Use normalized and tempered material only.
e. At temperatures over 1000F(538C), use only
when the carbon is 0.04 percent or higher.
Gate Valve
3
Schedule 80
Schedule160
Schedule xx-stg
(in.) D3
1/4 13.7
D2
7.7
t
3.0
D3
-
D2
-
t
-
D3
-
D2
-
t
-
3/8
1/2
17.1
21.3
10.7
13.9
3.2
3.7
21.3
11.8
4.8
21.3
6.4
7.5
3/4
1
26.7
33.4
18.8
24.4
3.9
4.5
26.7
33.4
15.6
20.7
5.6
6.4
26.7
33.4
11.9
15.2
7.8
9.1
11/2
2
48.3
60.3
38.1
49.3
5.1
5.5
48.3
60.3
34.0
42.9
7.1
8.7
48.3
60.3
27.9
38.2
10.2
11.1
24
Features:
Lift Check Valve.
Welded Bonnet (W.B).
Socket Weld (S.W) or Threaded End (T.E).
Integral Hardfaced Seat.
Specifications:
Basic Design:
Socket Weld End (S.W):
Threaded End (T.E):
Test and Inspect:
Standard Material:
Features:
Bolted Bonnet (B.B) or Welded Bonnet (W.B).
Spiral Wound Gasket of Stainless Steel and Flexible Graphite
with Controlled Compression.
Flanged End.
Compact Outside Screw & Yoke or Compact Inside Screw.
Renewable Hardfaced Seats.
Specifications:
Basic Design:
Face to Face:
Flanged End:
Test and Inspect:
Standard Material:
OS & Y W.B
inch
3/8
1/2
3/4
1 1/4
1 1/2
Class 800
inch
mm
0.39
10
0.51
13
0.71
18
0.94
24
1.14
29
1.46
37
1.81
46
Class 1500
inch
mm
0.39
10.0
0.51
13.0
0.67
17.0
0.91
23.0
1.18
30.0
1.46
37.0
1.83
46.5
Class 800
inch
mm
3.86
98
3.86
98
4.33
110
4.72
120
5.51
140
1.51
140
6.69
170
Class 1500
inch
mm
4.01
102
4.01
102
4.01
102
5.12
130
5.90
150
7.48
190
7.48
190
Class 800
inch
mm
3.30
84
3.30
84
3.30
84
4.01
102
4.40
114
4.49
114
5.71
145
Class 1500
inch
mm
3.54
90
3.54
90
3.98
101
4.92
125
5.19
132
5.63
143
7.99
203
Class 800
lb
kg
6.60
3.0
6.38
2.9
8.14
3.7
14.30
6.5
18.70
8.5
21.10
9.6
23.76
10.8
Class 1500
lb
kg
7.04
3.2
7.04
3.2
9.02
4.1
15.84
7.2
23.10
10.5
25.5
11.6
26.3
12.0
Weight
23
CLASS 300
CLASS 600
CLASS 150
CLASS 300
H (OPEN)
CLASS 600
W
CLASS 150
WEIGHT
CLASS 300
CLASS 600
inch
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb
kg
lb
kg
lb
kg
OS & Y B.B
1/2
0.39
10
4.25
108
5.5
140
6.5
165
6.20
158
6.70
169
3.94
100
9.9
4.5
10.6
4.8
13.0
5.9
3/4
0.51
13
4.62
117
6.0
152
7.5
190
6.70
169
7.80
197
3.94
100
11.4
5.2
13.7
6.2
16.3
7.4
4
1
0.71
18
5.00
127
6.5
165
8.5
216
7.80
197
9.30
236
4.92
125
19.8
8.2
20.5
9.3
22.9
10.4
1 1/4
0.94
24
5.50
140
7.0
178
9.0
229
9.30
236
9.70
246
6.30
160
25..3
11.5
30.8
14.0
35.6
16.2
1 1/2
1.14
29
6.50
165
7.5
190
9.5
241
9.70
246
11.10
283
6.30
160
27.5
12.5
34.1
15.5
38.5
17.5
2
1.46
37
8.00
203
8.5
216
11.5
292
11.10
283
12.60
320
7.10
180
44.7
20.3
51.5
23.4
62.3
28.3
Features:
Bolted Bonnet (B.B) or Welded Bonnet (W.B).
Spiral Wound Gasket of Stainless Steel and Flexible Graphite
with Controlled Compression.
Reduced or Full Port.
Compact Outside Screw & Yoke or Compact Inside Screw.
Renewable Hardfaced Seats.
Socket Weld (S.W) or Threaded End (T.E).
OS & Y W.B
Basic Design:
Socket Weld End (S.W):
Threaded End (T.E):
Test and Inspect:
Standard Material:
Features:
Specifications:
Specifications:
Basic Design:
Socket Weld End(S.W):
Threaded End (T.E):
Test and Inspect:
Standard Material:
OS & Y B.B
Reduced Port
Full Port
d
L
Outside Screw
& Yoke
H (OPEN)
Inside Screw
W
B.B
Weight
W.B
inch
inch
3/8
-
1/2
3/8
3/4
1/2
1
3/4
1 1/4
1
1 1/2
1 1/4
1 1/2
inch
mm
inch
mm
inch
mm
inch
0.28
7
3.12
79
6.22
158
6.65
0.39
10
3.12
79
6.22
158
6.65
0.51
13
3.62
92
6.70
169
7.20
0.71
18
4.37
111
7.76
197
8.19
0.94
24
4.75
120
9.30
236
10.60
1.14
29
4.75
120
9.68
246
11.42
mm
inch
mm
lb
kg
lb
kg
169
3.93
100
4.84
2.2
3.96
1.8
169
3.93
100
4.62
2.1
3.74
1.7
182
3.90
100
5.06
2.3
4.62
2.1
208
4.92
125
8.80
4.0
8.14
3.7
254
6.29
160
13.00
5.9
11.44
5.2
290
6.29
160
15.20
6.9
13.64
6.2
330
7.08 7.87 7.87
180
200 200
24.60 34.76 44.00
11.2 15.8 20.0
22.88 32.56
10.4 14.8
-
2 1/2
2
3
-
inch
1/2
3/4
1 1/4
1 1/2
inch
mm
0.39
10
0.51
13
0.71
18
0.94
24
1.14
29
1.46
37
inch
mm
7.32
186
7.32
186
7.32
186
9.13
232
9.13
232
10.98
279
inch
mm
3.12
79
3.90
98
4.33
110
4.33
110
6.69
170
6.69
170
Weight
lb
kg
14.52
6.6
25.96
11.8
38.72
17.6
37.18
16.9
47.3
21.5
46.86
21.3
22
Features:
Reduced or Full Port.
Lift, Piston or Swing Check Valve.
Bolted Bonnet (B.B) or Welded Bonnet (W.B).
Spiral Wound Gasket of Stainless Steel.
Socket Weld (S.W) or Threaded End (T.E).
Renewable or Integral Hardfaced Seat.
Specifications:
Basic Design:
Socket Weld End (S.W):
Threaded End (T.E):
Test and Inspect:
Standard Material:
Pistoan Check
Valve W.B
Specifications:
Basic Design:
Socket Weld End (S.W):
Threaded End (T.E):
Test and Inspect:
Standard Material:
Features:
inch
inch
inch
mm
inch
mm
inch
mm
lb
kg
3/8
0.28
7
3.62
92
2.56
65
6.60
3.0
1/2
3/8
0.39
10
4.37
111
3.12
79
6.60
3.0
3/4
1/2
0.51
13
4.37
111
3.12
79
7.48
3.4
1
3/4
0.71
18
4.72
120
3.82
97
10.56
4.8
1 1/4
1
0.94
24
5.98
152
4.09
104
15.18
6.9
1 1/2
1 1/4
1.14
29
6.77
172
4.72
120
23.54
10.7
2
1 1/2
1.46
37
7.87
200
5.47
139
32.12
14.6
1
3/4
0.71
18
4.72
120
3.82
97
9.46
4.3
1 1/4
1
0.94
24
4.72
120
4.13
105
13.42
6.1
1 1/2
1 1/4
1.14
29
5.51
140
4.72
120
19.4
8.8
OS & Y W.B
d
L
H
Weight
inch
inch
inch
mm
inch
mm
inch
mm
lb
kg
3/8
0.28
7
3.62
92
3.12
79
6.82
3.1
1/2
3/8
0.39
10
4.37
111
3.12
79
6.60
3.0
21
3/4
1/2
0.51
13
4.37
111
3.12
79
7.92
3.6
Reduced Port
Full Port
d
L
1 1/2
1.46
37
7.00
178
5.51
140
27.72
12.6
OS & Y B.B
H (OPEN)
W
B.B
Weight
W.B
inch
inch
inch
mm
inch
mm
inch
mm
inch
mm
lb
kg
lb
kg
3/8
0.28
7
3.62
92
6.65
169
3.94
100
10.34
4.7
8.80
4.0
1/2
3/8
0.39
10
4.37
111
7.75
197
4.92
125
10.12
4.6
8.56
3.9
3/4
1/2
0.51
13
4.37
111
7.75
197
4.92
125
10.12
4.6
8.56
3.9
1
3/4
0.71
18
4.72
120
9.30
236
6.30
160
13.86
6.3
12.76
5.8
1 1/4
1
0.94
24
4.75
120
9.69
246
6.30
160
19.14
8.7
17.66
7.8
1 1/2
1 1/4
1.14
29
5.5
140
11.14
283
7.09
180
26.60
12.2
24.64
11.2
2
1 1/2
1.46
37
7.0
178
13.00
330
7.87
200
37.80
17.2
35.20
16.0
Features:
Fig. No. F12500T22
Fig. No. F12500S22
Features:
Welded Bonnet (W.B).
Compact Outside Screw & Yoke.
Socket Weld (S.W), Threaded End (T.E),
or Butt-Weld End (B.W).
Renewable Hardfaced Seats.
Specifications:
Basic Design:
Socket Weld End (S.W):
Threaded End (T.E):
Test and Inspect:
Standard Material:
Specifications:
Basic Design:
Socket Weld End (S.W):
Threaded End (T.E):
Butt Weld (B.W):
Test and Inspect:
Standard Material:
ANSI B16.34
ANSI B16.11
ANSI B1.20.1
ANSI B16.25
API-598
See Page 3
Piston Check
Valve W.B
Normal
Diameter
Reduced Port
Full Port
d
inch
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb
kg
lb
kg
1/2
0.51
13
7.32
186
8.5
216
8.58
218
4.92
125
15.4
7
24.86
11.3
3/4
0.51
13
7.32
186
9.0
229
8.58
218
4.92
125
15.4
7
27.50
12.5
1
0.71
18
7.32
186
10.0
254
10.20
259
6.30
160
30.8
14
34.32
15.6
1 1/4
0.94
24
9.13
232
11.0
279
12.60
320
7.09
180
49.5
22.5
39.16
17.8
1 1/2
1.14
29
9.13
232
12.0
305
12.60
320
7.09
180
50.6
23
45.98
20.9
2
1.46
37
10.98
279
14.5
368
13.78
350
7.87
200
61.6
28
78.10
35.5
L
H
Weight
inch
inch
inch
mm
inch
mm
inch
mm
lb
kg
3/8
0.28
7
3.12
79
2.40
61
3.08
1.4
1/2
3/8
0.39
10
3.12
79
2.40
61
2.64
1.2
3/4
1/2
0.51
13
3.62
92
2.56
65
3.08
1.4
1
3/4
0.71
18
4.37
111
3.11
79
5.06
2.3
1 1/4
1
0.94
24
4.72
120
3.74
95
8.58
3.9
1 1/2
1 1/4
1.14
29
5.98
152
4.06
103
12.3
5.6
2
1 1/2
1.46
37
6.8
172
4.56
118
19.6
8.9
1
3/4
0.71
18
4.37
111
3.31
84
4.18
1.9
1 1/4
1
0.94
24
4.72
120
3.98
101
7.48
3.4
1 1/2
1 1/4
1.14
29
4.72
120
4.72
120
9.90
4.5
2
1 1/2
1.46
37
5.51
140
5.24
133
16.06
7.3
Reduced Port
Full Port
d
L
H
Weight
inch
inch
inch
mm
inch
mm
inch
mm
lb
kg
3/8
0.28
7
3.12
79
2.40
61
2.64
1.2
1/2
3/8
0.39
10
3.12
79
2.40
61
2.20
1.0
20
3/4
1/2
0.51
13
3.62
92
3.07
78
2.42
1.1
Features:
Bolted Bonnet (B.B).
Spiral Wound Gasket of Stainless Steel.
Integral or Renewable Hardfaced Seat.
Flanged End.
Piston or Swing Check Valve.
Specifications:
Basic Design:
Face to Face:
Flanged End:
Test and Inspect:
Standard Material:
Features:
Reduced or Full Port.
Outside Screw & Yoke Long Bonnet.
Spiral Wound Gasket of Stainless Steel.
Socket Weld (S.W) or Threaded End (T.E).
Renewable Hardfaced Seats.
Balancing Hole in Wedge.
Specifications:
Basic Design:
Socket Weld End (S.W):
Threaded End (T.E):
Test and Inspect:
Standard Material:
CLASS 300
CLASS 600
CLASS 150
CLASS 300
CLASS 600
CLASS 150
WEIGHT
CLASS 300
CLASS 600
inch
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb
kg
lb
kg
lb
kg
1/2
0.51
13
4.25
108
6.0
152
6.5
165
2.40
61
2.40
61
5.72
2.6
5.94
2.7
6.60
3.0
3/4
0.71
18
4.62
117
7.0
178
7.5
190
2.40
61
3.11
79
7.48
3.4
8.14
3.7
8.80
4.0
19
1
0.94
24
5.00
127
8.0
203
8.5
216
3.11
78
3.74
95
9.68
4.4
10.34
4.7
12.76
5.8
1 1/4
1.14
29
5.50
140
8.5
216
9.0
229
3.74
95
4.06
103
18.04
8.2
19.36
8.8
20.90
9.5
1 1/2
1.46
37
6.50
165
9.0
229
9.5
241
4.06
103
4.65
118
19.80
9.0
21.12
9.6
22.00
10.0
2
1.81
46
8.00
203
10.5
267
11.5
292
4.65
118
5.31
135
27.72
12.6
30.14
13.7
34.32
15.6
Reduced Port
Full Port
d
L
H (OPEN)
W
Weight
inch
inch
inch
mm
inch
mm
inch
mm
inch
mm
lb
kg
3/8
1/4
0.28
7
3.12
79
13.00
330
3.94
100
11.44
5.2
1/2
3/8
0.39
10
3.62
92
13.11
333
3.94
100
15.64
7.1
3/4
1/2
0.51
13
4.37
111
14.17
360
4.92
125
20.70
9.4
1
3/4
0.71
18
4.72
120
16.02
407
6.30
160
29.74
13.5
1 1/4
1
0.94
24
4.72
120
18.70
475
6.30
160
33.04
15.0
1 1/2
1 1/4
1.14
29
5.51
140
18.70
475
7.09
180
39.21
17.8
2
1 1/2
1.46
37
7.00
178
21.69
551
7.87
200
61.60
28.0
ASTM Specifications
ASTM Specifications
Part
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Carbon Steel
Part Name
Body
Bonnet
Stem
Disc
Bonnet Bolt (a)
Gasket
Gland
Packing
Gland Flange
Gland Bolt
Gland Bolt Nut
Gland Bolt Pin
Sleeve
Handwheel
Nameplate
Handwheel Washer
Handwheel Nut
Alloy Steel
A 105
(b, c)
A 105
A 105
A350
LF2
F5
F11(d) F22
LF2
F5
F11
F22
LF2
F5
F11
F22
A276 - 410
A276 - 420
A193 - B7 A320 - L7
A193 - B16
304 + Graphite
A276 - 410
Flexible Graphite
A105
LF2
F11
A193-B7 A320-L7
A193 - B16
A194-2H
A194-7
A194 - 4
A276 - 410
Part
No.
Stainless Steel
A182
F304 (e)
F304L
F304
F304L
F304
F304L
A276 - 304 A276 - 304L
304 + STL 304L + STL
A193 - B8
A276 - 304
F316(e)
F316
F316
A276 - 316
316 + STL
F316L
F316L
F316L
A276 - 316L
316L + STL
A193 - B8M
316 + Graphite
A276 - 316
PTFE
CF8
A193 - B8 / B8M
A194 - 8
A276 - 304
F51
F51
F51
F51
F51
F51
F51
Body
Cover
A 105 LF2
Disc
Cover Bolt
(a)
Gasket
6
7
Nameplate
Spring
Alloy Steel
F5
F5
F5
F22
A276 - 420
F304 F304L
304+ 304L+
STL
A193- A320B7
Stainless Steel
A182
A193 - B16
L7
304 + Graphite
STL
A193 - B8
316 + Graphite
Aluminum
304
Stainless Steel
ASTM Specifications
A108 - 1020
A194 - 2H
Part
No.
304
Notes:
Globe Valve
Carbon Steel
A 105 A350
(b, c) LF2
A 105 LF2
F51
A276 - 410
A197
Aluminum
Part Name
Carbon Steel
Part Name
A 105 A350
Alloy Steel
Stainless Steel
A182
Body
(b, c) LF2
A 105 LF2
F5
F5
Cover
A 105 LF2
F5
Disc
A276 - 420
Seat Ring
A276-410 + STL
Retaining Nut
A194 - 2H
6
7
Hing
Hing Pin
A276 - CA40
A276 - 410
8
9
Supporter
Cover Bolt
10
(a)
Gasket
11
Nameplate
F11
F22
A276 - 304
A193- A320A193 - B16
B7
L7
304 + Graphite
F304 F304L
304+ 304L+
A276 - 316
A193 - B8
A193 - B8M
316 + Graphite
Aluminum
304
Notes:
a. Temperature limitations on bolting are as following: Gr B7,1000F(538C); Gr L7,1000F(538C);
Gr B16,1100F(595C); Gr B8-CL1,1500F(816C); Gr B8M-CL1,1500F(816C);
Gr B8-CL2,1000F(538C); and Gr B8M-CL2,1000F(538C).
b. Upon prolonged exposure to temperatures above 800F(425C), the carbide phase of
carbon steel may be converted to graphite.
c. Only killed steel shall be used above 850F(455C).
d. Use normalized and tempered material only.
e. At temperatures over 1000F(538C), use only when the carbon is 0.04 percent or higher.
18
Features:
Features:
Bolted Bonnet (B.B) or Welded Bonnet (W.B).
Spiral Wound Gasket of Stainless Steel.
Integral Stellited Seat.
Flanged End.
Compact Outside Screw & Yoke.
Specifications:
Basic Design:
Face to Face:
Flanged End:
Test and Inspect:
Standard Material:
Specifications:
Basic Design:
Socket Weld End (S.W):
Threaded End (T.E):
Test and Inspect:
Standard Material:
OS & Y W. B
OS & Y B. B
OS & Y B.B
CLASS 300
Reduced Port
Full Port
d
L
H (OPEN)
W
Weight
inch
inch
inch
mm
inch
mm
inch
mm
inch
mm
lb
kg
3/8
1/4
0.28
7
3.12
79
13.11
333
3.94
100
14.52
6.6
1/2
3/8
0.39
10
3.62
92
13.26
337
3.94
100
14.08
6.4
17
3/4
1/2
0.51
13
4.37
111
14.57
370
4.92
125
15.84
7.2
1
3/4
0.71
18
4.72
120
14.96
380
6.30
160
20.90
9.5
1 1/4
1
0.94
24
4.72
120
16.41
410
6.30
160
29.70
13.5
1 1/2
1 1/4
1.14
29
6.77
172
18.66
474
7.09
180
37.40
17.0
2
1 1/2
1.46
37
7.87
200
21.50
546
7.87
200
43.56
19.8
CLASS 600
CLASS 150
CLASS 300
H (OPEN)
CLASS 600
W
CLASS 150
WEIGHT
CLASS 300
CLASS 600
inch
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb
kg
lb
kg
lb
kg
1/2
0.39
10
4.25
108
6.0
152
6.5
165
6.54
166
6.73
171
3.94
100
7.94
3.6
8.82
4.0
12.34
5.6
3/4
0.51
13
4.62
117
7.0
178
7.5
190
6.73
171
8.15
207
3.94
100
11.02
5.0
11.46
5.2
15.21
6.9
10
1
0.71
18
5.00
127
8.0
203
8.5
216
8.15
207
9.45
240
4.92
125
14.55
6.6
16.53
7.5
21.6
9.8
1 1/4
0.94
24
5.50
140
8.5
216
9.0
229
9.45
240
10.12
256
6.30
160
21.60
9.8
24.91
11.3
27.55
12.5
1 1/2
1.14
29
6.50
165
9.0
229
9.5
241
10.12
256
13.00
330
6.30
160
26.45
12.0
36.37
16.5
40.56
18.4
2
1.46
37
8.00
203
10.5
267
11.5
292
13.00
330
14.96
380
7.09
180
33.07
15.0
40.12
18.2
44.09
20.0
Features:
Bolted Bonnet (B.B) or Welded Bonnet (W,B).
Spiral Wound Gasket of Stainless Steel.
Socket Weld (S.W) or Threaded End (T.E).
Compact Outside Screw & Yoke or Compact Inside Screw.
Integral Stellited Seat.
Specifications:
Basic Design:
Socket Weld End (S.W):
Threaded End (T.E):
Test and Inspect:
Standard Material:
OS & Y W.B
Features:
Bolted Bonnet (B.B).
Reduced Port.
Spiral Wound Gasket of Stainless Steel.
Compact Outside Screw & Yoke.
Needle Point Flow Control.
Integral Stellited Seat.
Socket Weld (S.W) or Threaded End (T.E).
Specifications:
Basic Design:
Socket Weld End (S.W):
Threaded End (T.E):
Test and Inspect:
Standard Material:
OS & Y B.B
Reduced Port
Full Port
d
L
Outside Screw
& Yoke
H (OPEN)
Inside Screw
W
B.B
Weight
W.B
inch
inch
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb
kg
lb
kg
3/8
0.39
10
3.12
79
6.54
166
6.18
157
3.94
100
4.62
2.1
3.96
1.8
1/2
3/8
0.39
10
3.12
79
6.54
166
6.18
157
3.94
100
4.18
1.9
3.74
1.7
3/4
1/2
0.51
13
3.62
92
6.73
171
6.40
162
3.94
100
4.62
2.1
4.62
2.1
11
1
3/4
0.71
18
4.37
111
8.15
207
7.68
195
4.92
125
8.58
3.9
8.14
3.7
1 1/4
1
0.94
24
4.72
120
9.45
240
10.51
267
6.30
160
12.76
5.8
11.44
5.2
1 1/2
1 1/4
1.14
29
5.98
152
10.12
258
10.51
267
6.30
160
15.80
7.2
13.64
6.2
2
1 1/2
1.46
37
6.77
172
13.00
330
11.85
301
7.09
180
23.80
10.8
22.88
10.4
2
1.81
46
7.87
200
13.98
355
7.87
200
35.20
16.0
32.56
14.8
inch
inch
mm
inch
mm
inch
mm
inch
mm
lb
kg
1/4
0.28
7
3.11
79
6.93
176
3.94
100
5.06
2.3
16
3/8
0.39
10
3.11
79
6.93
176
3.94
100
4.84
2.2
1/2
0.39
10
3.11
79
6.93
176
3.94
100
4.40
2.0
3/4
0.51
13
3.62
92
6.93
176
3.94
100
4.62
2.1
1
0.71
18
4.37
111
8.35
212
4.92
125
9.24
4.2
1 1/4
0.94
24
4.72
120
9.06
230
6.30
160
13.42
6.1
1 1/2
1.14
29
5.98
152
10.00
254
6.30
160
16.5
7.5
2
1.46
37
6.77
172
11.57
294
7.09
180
24.64
11.2
Features:
Bolted Bonnet (B.B).
Reduced Port.
Spiral Wound Gasket of Stainless Steel.
Flanged End.
Compact Outside Screw & Yoke.
Needle Point Flow Control.
Integral Stellited Seat.
Features:
Bolted Bonnet (B.B) or Welded Bonnet (W.B).
Spiral Wound Gasket of Stainless Steel.
Socket Weld (S.W) or Threaded End (T.E).
Reduced or Full Port.
Compact Outside Screw & Yoke or Compact Inside Screw.
Integral Stellited Seat.
Specifications:
Specifications:
Basic Design:
Face to Face:
Flanged End:
Test and Inspect:
Standard Material:
Basic Design:
Socket Weld End (S.W):
Threaded End (T.E):
Test and Inspect:
Standard Material:
OS & Y B.B
CLASS 300
CLASS 600
H (OPEN)
W
CLASS 150
WEIGHT
CLASS 300
CLASS 600
inch
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb
kg
lb
kg
lb
kg
1/2
0.39
10
4.25
108
6.0
152
6.5
165
6.93
176
3.94
100
7.92
3.6
8.80
4.0
12.32
5.6
3/4
0.51
13
4.62
117
7.0
178
7.5
190
6.93
176
3.94
100
11.00
5.0
11.44
5.2
15.18
6.9
15
1
0.71
18
5.00
127
8.0
203
8.5
216
8.35
212
4.92
125
14.52
6.6
16.50
7.5
21.56
9.8
1 1/4
0.94
24
5.51
140
8.5
216
9.0
229
9.06
230
6.30
160
21.56
9.8
24.86
11.3
27.50
12.5
1 1/2
1.14
29
6.50
165
9.0
229
9.5
241
10.00
254
6.30
160
26.40
12.0
36.30
16.5
40.48
18.4
2
1.46
37
8.00
203
10.5
267
11.5
292
11.57
294
7.09
180
33.00
15.0
40.04
18.2
44.00
20.0
OS & Y W.B
OS & Y B.B
Reduced Port
Full Port
d
L
H (OPEN)
W
B.B
Weight
W.B
inch
inch
inch
mm
inch
mm
inch
mm
inch
mm
lb
kg
lb
kg
3/8
0.28
7
3.62
92
6.73
171
3.94
100
10.78
4.9
9.46
4.3
12
1/2
3/8
0.39
10
4.37
111
8.15
207
4.92
125
10.34
4.7
9.02
4.1
3/4
1/2
0.51
13
4.37
111
8.15
207
4.92
125
10.12
4.6
8.80
4.0
1
3/4
0.71
18
4.72
120
9.45
240
6.30
160
14.96
6.8
13.64
6.2
1 1/4
1
0.94
24
5.98
152
10.16
258
6.30
160
20.24
9.2
18.92
8.6
1 1/2
1 1/4
1.14
29
6.80
172
13.00
330
7.09
180
29.90
13.6
27.94
12.7
2
1 1/2
1.46
37
7.87
200
13.98
355
7.87
200
45.98
20.9
42.02
19.1
Features:
Welded Bonnet (W.B).
Compact Outside Screw & Yoke.
Socket Weld (S.W), Threaded End (T.E),
or Butt Weld End (B.W).
Integral Stellited Seat.
Features:
Welded Bonnet (W.B) or Bolted Bonnet (B.B).
Compact Outside Screw & Yoke.
Socket Weld (S.W) or Threaded End (T.E).
Integral Stellited Seat.
Specifications:
Specifications:
Basic Design:
ANSI B16.34
ANSI B16.11
ANSI B1.20.1
ANSI B16.25
API-598
Standard Material:
See Page 9
Basic Design:
Socket Weld End (S.W):
Threaded End (T.E):
Test and Inspect:
Standard Material:
ANSI B16.34
ANSI B16.11
ANSI B1.20.1
API-598
See Page 9
OS & Y W.B
OS & Y B.W
Normal Diameter
inch
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb
kg
lb
kg
Class 800
1/2
0.39
10
7.32
186
8.50
216
8.94
227
6.30
160
17.6
8
29.4
12
3/4
0.51
13
7.32
186
9.02
229
8.94
227
6.30
160
17.6
8
28.6
13
13
1
0.71
18
7.32
186
10.00
254
11.34
288
6.30
160
37.4
17
44.0
20
1 1/4
0.94
24
9.13
232
10.98
279
13.00
330
7.87
200
55.0
25
70.4
32
1 1/2
1.14
29
9.13
232
12.00
305
13.00
330
7.87
200
57.2
26
77.0
35
OS & Y B.B
2
1.46
37
10.98
279
14.20
368
14.17
360
8.66
220
74.8
34
88.0
40
Class 1500
Class 800
Class 1500
Class 800
H (OPEN)
Class 1500
Class 800
Class 1500
B.B
Class 800
Class 800
Weight
W.B
Class 1500
inch
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb
kg
lb
kg
lb
kg
1/2
0.51
13
0.51
13
3.86
98
5.51
140
6.89
175
6.69
170
3.94
100
3.94
100
10.12
4.6
7.70
3.5
9.90
4.5
14
3/4
0.71
18
0.51
13
4.37
111
5.51
140
8.46
215
7.68
195
4.92
125
4.92
125
10.12
4.6
8.36
3.8
13.42
6.1
1
0.94
24
0.75
19
4.72
120
5.51
140
10.00
254
9.25
235
6.30
160
6.30
160
16.72
7.6
14.52
6.5
16.72
7.6
1 1/4
1.14
29
11.02
28
5.51
140
7.00
178
12.00
305
10.94
278
6.30
160
7.09
180
21.56
9.8
18.70
8.5
21.56
9.8
1 1/2
1.46
37
11.02
28
5.51
140
7.00
178
12.00
305
10.94
278
7.09
180
7.09
180
30.14
13.7
24.86
11.30
31.90
14.5
2
1.81
46
1.49
38
6.69
170
8.50
216
14.37
365
12.20
310
7.87
200
7.87
200
30.80
14.0
27.50
12.5
45.76
20.8
Features:
Welded Bonnet (W.B).
Compact Outside Screw & Yoke.
Socket Weld (S.W), Threaded End (T.E),
or Butt Weld End (B.W).
Integral Stellited Seat.
Features:
Welded Bonnet (W.B) or Bolted Bonnet (B.B).
Compact Outside Screw & Yoke.
Socket Weld (S.W) or Threaded End (T.E).
Integral Stellited Seat.
Specifications:
Specifications:
Basic Design:
ANSI B16.34
ANSI B16.11
ANSI B1.20.1
ANSI B16.25
API-598
Standard Material:
See Page 9
Basic Design:
Socket Weld End (S.W):
Threaded End (T.E):
Test and Inspect:
Standard Material:
ANSI B16.34
ANSI B16.11
ANSI B1.20.1
API-598
See Page 9
OS & Y W.B
OS & Y B.W
Normal Diameter
inch
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb
kg
lb
kg
Class 800
1/2
0.39
10
7.32
186
8.50
216
8.94
227
6.30
160
17.6
8
29.4
12
3/4
0.51
13
7.32
186
9.02
229
8.94
227
6.30
160
17.6
8
28.6
13
13
1
0.71
18
7.32
186
10.00
254
11.34
288
6.30
160
37.4
17
44.0
20
1 1/4
0.94
24
9.13
232
10.98
279
13.00
330
7.87
200
55.0
25
70.4
32
1 1/2
1.14
29
9.13
232
12.00
305
13.00
330
7.87
200
57.2
26
77.0
35
OS & Y B.B
2
1.46
37
10.98
279
14.20
368
14.17
360
8.66
220
74.8
34
88.0
40
Class 1500
Class 800
Class 1500
Class 800
H (OPEN)
Class 1500
Class 800
Class 1500
B.B
Class 800
Class 800
Weight
W.B
Class 1500
inch
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb
kg
lb
kg
lb
kg
1/2
0.51
13
0.51
13
3.86
98
5.51
140
6.89
175
6.69
170
3.94
100
3.94
100
10.12
4.6
7.70
3.5
9.90
4.5
14
3/4
0.71
18
0.51
13
4.37
111
5.51
140
8.46
215
7.68
195
4.92
125
4.92
125
10.12
4.6
8.36
3.8
13.42
6.1
1
0.94
24
0.75
19
4.72
120
5.51
140
10.00
254
9.25
235
6.30
160
6.30
160
16.72
7.6
14.52
6.5
16.72
7.6
1 1/4
1.14
29
11.02
28
5.51
140
7.00
178
12.00
305
10.94
278
6.30
160
7.09
180
21.56
9.8
18.70
8.5
21.56
9.8
1 1/2
1.46
37
11.02
28
5.51
140
7.00
178
12.00
305
10.94
278
7.09
180
7.09
180
30.14
13.7
24.86
11.30
31.90
14.5
2
1.81
46
1.49
38
6.69
170
8.50
216
14.37
365
12.20
310
7.87
200
7.87
200
30.80
14.0
27.50
12.5
45.76
20.8
Features:
Bolted Bonnet (B.B).
Reduced Port.
Spiral Wound Gasket of Stainless Steel.
Flanged End.
Compact Outside Screw & Yoke.
Needle Point Flow Control.
Integral Stellited Seat.
Features:
Bolted Bonnet (B.B) or Welded Bonnet (W.B).
Spiral Wound Gasket of Stainless Steel.
Socket Weld (S.W) or Threaded End (T.E).
Reduced or Full Port.
Compact Outside Screw & Yoke or Compact Inside Screw.
Integral Stellited Seat.
Specifications:
Specifications:
Basic Design:
Face to Face:
Flanged End:
Test and Inspect:
Standard Material:
Basic Design:
Socket Weld End (S.W):
Threaded End (T.E):
Test and Inspect:
Standard Material:
OS & Y B.B
CLASS 300
CLASS 600
H (OPEN)
W
CLASS 150
WEIGHT
CLASS 300
CLASS 600
inch
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb
kg
lb
kg
lb
kg
1/2
0.39
10
4.25
108
6.0
152
6.5
165
6.93
176
3.94
100
7.92
3.6
8.80
4.0
12.32
5.6
3/4
0.51
13
4.62
117
7.0
178
7.5
190
6.93
176
3.94
100
11.00
5.0
11.44
5.2
15.18
6.9
15
1
0.71
18
5.00
127
8.0
203
8.5
216
8.35
212
4.92
125
14.52
6.6
16.50
7.5
21.56
9.8
1 1/4
0.94
24
5.51
140
8.5
216
9.0
229
9.06
230
6.30
160
21.56
9.8
24.86
11.3
27.50
12.5
1 1/2
1.14
29
6.50
165
9.0
229
9.5
241
10.00
254
6.30
160
26.40
12.0
36.30
16.5
40.48
18.4
2
1.46
37
8.00
203
10.5
267
11.5
292
11.57
294
7.09
180
33.00
15.0
40.04
18.2
44.00
20.0
OS & Y W.B
OS & Y B.B
Reduced Port
Full Port
d
L
H (OPEN)
W
B.B
Weight
W.B
inch
inch
inch
mm
inch
mm
inch
mm
inch
mm
lb
kg
lb
kg
3/8
0.28
7
3.62
92
6.73
171
3.94
100
10.78
4.9
9.46
4.3
12
1/2
3/8
0.39
10
4.37
111
8.15
207
4.92
125
10.34
4.7
9.02
4.1
3/4
1/2
0.51
13
4.37
111
8.15
207
4.92
125
10.12
4.6
8.80
4.0
1
3/4
0.71
18
4.72
120
9.45
240
6.30
160
14.96
6.8
13.64
6.2
1 1/4
1
0.94
24
5.98
152
10.16
258
6.30
160
20.24
9.2
18.92
8.6
1 1/2
1 1/4
1.14
29
6.80
172
13.00
330
7.09
180
29.90
13.6
27.94
12.7
2
1 1/2
1.46
37
7.87
200
13.98
355
7.87
200
45.98
20.9
42.02
19.1
Features:
Bolted Bonnet (B.B) or Welded Bonnet (W,B).
Spiral Wound Gasket of Stainless Steel.
Socket Weld (S.W) or Threaded End (T.E).
Compact Outside Screw & Yoke or Compact Inside Screw.
Integral Stellited Seat.
Specifications:
Basic Design:
Socket Weld End (S.W):
Threaded End (T.E):
Test and Inspect:
Standard Material:
OS & Y W.B
Features:
Bolted Bonnet (B.B).
Reduced Port.
Spiral Wound Gasket of Stainless Steel.
Compact Outside Screw & Yoke.
Needle Point Flow Control.
Integral Stellited Seat.
Socket Weld (S.W) or Threaded End (T.E).
Specifications:
Basic Design:
Socket Weld End (S.W):
Threaded End (T.E):
Test and Inspect:
Standard Material:
OS & Y B.B
Reduced Port
Full Port
d
L
Outside Screw
& Yoke
H (OPEN)
Inside Screw
W
B.B
Weight
W.B
inch
inch
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb
kg
lb
kg
3/8
0.39
10
3.12
79
6.54
166
6.18
157
3.94
100
4.62
2.1
3.96
1.8
1/2
3/8
0.39
10
3.12
79
6.54
166
6.18
157
3.94
100
4.18
1.9
3.74
1.7
3/4
1/2
0.51
13
3.62
92
6.73
171
6.40
162
3.94
100
4.62
2.1
4.62
2.1
11
1
3/4
0.71
18
4.37
111
8.15
207
7.68
195
4.92
125
8.58
3.9
8.14
3.7
1 1/4
1
0.94
24
4.72
120
9.45
240
10.51
267
6.30
160
12.76
5.8
11.44
5.2
1 1/2
1 1/4
1.14
29
5.98
152
10.12
258
10.51
267
6.30
160
15.80
7.2
13.64
6.2
2
1 1/2
1.46
37
6.77
172
13.00
330
11.85
301
7.09
180
23.80
10.8
22.88
10.4
2
1.81
46
7.87
200
13.98
355
7.87
200
35.20
16.0
32.56
14.8
inch
inch
mm
inch
mm
inch
mm
inch
mm
lb
kg
1/4
0.28
7
3.11
79
6.93
176
3.94
100
5.06
2.3
16
3/8
0.39
10
3.11
79
6.93
176
3.94
100
4.84
2.2
1/2
0.39
10
3.11
79
6.93
176
3.94
100
4.40
2.0
3/4
0.51
13
3.62
92
6.93
176
3.94
100
4.62
2.1
1
0.71
18
4.37
111
8.35
212
4.92
125
9.24
4.2
1 1/4
0.94
24
4.72
120
9.06
230
6.30
160
13.42
6.1
1 1/2
1.14
29
5.98
152
10.00
254
6.30
160
16.5
7.5
2
1.46
37
6.77
172
11.57
294
7.09
180
24.64
11.2
Features:
Features:
Bolted Bonnet (B.B) or Welded Bonnet (W.B).
Spiral Wound Gasket of Stainless Steel.
Integral Stellited Seat.
Flanged End.
Compact Outside Screw & Yoke.
Specifications:
Basic Design:
Face to Face:
Flanged End:
Test and Inspect:
Standard Material:
Specifications:
Basic Design:
Socket Weld End (S.W):
Threaded End (T.E):
Test and Inspect:
Standard Material:
OS & Y W. B
OS & Y B. B
OS & Y B.B
CLASS 300
Reduced Port
Full Port
d
L
H (OPEN)
W
Weight
inch
inch
inch
mm
inch
mm
inch
mm
inch
mm
lb
kg
3/8
1/4
0.28
7
3.12
79
13.11
333
3.94
100
14.52
6.6
1/2
3/8
0.39
10
3.62
92
13.26
337
3.94
100
14.08
6.4
17
3/4
1/2
0.51
13
4.37
111
14.57
370
4.92
125
15.84
7.2
1
3/4
0.71
18
4.72
120
14.96
380
6.30
160
20.90
9.5
1 1/4
1
0.94
24
4.72
120
16.41
410
6.30
160
29.70
13.5
1 1/2
1 1/4
1.14
29
6.77
172
18.66
474
7.09
180
37.40
17.0
2
1 1/2
1.46
37
7.87
200
21.50
546
7.87
200
43.56
19.8
CLASS 600
CLASS 150
CLASS 300
H (OPEN)
CLASS 600
W
CLASS 150
WEIGHT
CLASS 300
CLASS 600
inch
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb
kg
lb
kg
lb
kg
1/2
0.39
10
4.25
108
6.0
152
6.5
165
6.54
166
6.73
171
3.94
100
7.94
3.6
8.82
4.0
12.34
5.6
3/4
0.51
13
4.62
117
7.0
178
7.5
190
6.73
171
8.15
207
3.94
100
11.02
5.0
11.46
5.2
15.21
6.9
10
1
0.71
18
5.00
127
8.0
203
8.5
216
8.15
207
9.45
240
4.92
125
14.55
6.6
16.53
7.5
21.6
9.8
1 1/4
0.94
24
5.50
140
8.5
216
9.0
229
9.45
240
10.12
256
6.30
160
21.60
9.8
24.91
11.3
27.55
12.5
1 1/2
1.14
29
6.50
165
9.0
229
9.5
241
10.12
256
13.00
330
6.30
160
26.45
12.0
36.37
16.5
40.56
18.4
2
1.46
37
8.00
203
10.5
267
11.5
292
13.00
330
14.96
380
7.09
180
33.07
15.0
40.12
18.2
44.09
20.0
ASTM Specifications
ASTM Specifications
Part
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Carbon Steel
Part Name
Body
Bonnet
Stem
Disc
Bonnet Bolt (a)
Gasket
Gland
Packing
Gland Flange
Gland Bolt
Gland Bolt Nut
Gland Bolt Pin
Sleeve
Handwheel
Nameplate
Handwheel Washer
Handwheel Nut
Alloy Steel
A 105
(b, c)
A 105
A 105
A350
LF2
F5
F11(d) F22
LF2
F5
F11
F22
LF2
F5
F11
F22
A276 - 410
A276 - 420
A193 - B7 A320 - L7
A193 - B16
304 + Graphite
A276 - 410
Flexible Graphite
A105
LF2
F11
A193-B7 A320-L7
A193 - B16
A194-2H
A194-7
A194 - 4
A276 - 410
Part
No.
Stainless Steel
A182
F304 (e)
F304L
F304
F304L
F304
F304L
A276 - 304 A276 - 304L
304 + STL 304L + STL
A193 - B8
A276 - 304
F316(e)
F316
F316
A276 - 316
316 + STL
F316L
F316L
F316L
A276 - 316L
316L + STL
A193 - B8M
316 + Graphite
A276 - 316
PTFE
CF8
A193 - B8 / B8M
A194 - 8
A276 - 304
F51
F51
F51
F51
F51
F51
F51
Body
Cover
A 105 LF2
Disc
Cover Bolt
(a)
Gasket
6
7
Nameplate
Spring
Alloy Steel
F5
F5
F5
F22
A276 - 420
F304 F304L
304+ 304L+
STL
A193- A320B7
Stainless Steel
A182
A193 - B16
L7
304 + Graphite
STL
A193 - B8
316 + Graphite
Aluminum
304
Stainless Steel
ASTM Specifications
A108 - 1020
A194 - 2H
Part
No.
304
Notes:
Globe Valve
Carbon Steel
A 105 A350
(b, c) LF2
A 105 LF2
F51
A276 - 410
A197
Aluminum
Part Name
Carbon Steel
Part Name
A 105 A350
Alloy Steel
Stainless Steel
A182
Body
(b, c) LF2
A 105 LF2
F5
F5
Cover
A 105 LF2
F5
Disc
A276 - 420
Seat Ring
A276-410 + STL
Retaining Nut
A194 - 2H
6
7
Hing
Hing Pin
A276 - CA40
A276 - 410
8
9
Supporter
Cover Bolt
10
(a)
Gasket
11
Nameplate
F11
F22
A276 - 304
A193- A320A193 - B16
B7
L7
304 + Graphite
F304 F304L
304+ 304L+
A276 - 316
A193 - B8
A193 - B8M
316 + Graphite
Aluminum
304
Notes:
a. Temperature limitations on bolting are as following: Gr B7,1000F(538C); Gr L7,1000F(538C);
Gr B16,1100F(595C); Gr B8-CL1,1500F(816C); Gr B8M-CL1,1500F(816C);
Gr B8-CL2,1000F(538C); and Gr B8M-CL2,1000F(538C).
b. Upon prolonged exposure to temperatures above 800F(425C), the carbide phase of
carbon steel may be converted to graphite.
c. Only killed steel shall be used above 850F(455C).
d. Use normalized and tempered material only.
e. At temperatures over 1000F(538C), use only when the carbon is 0.04 percent or higher.
18
Features:
Bolted Bonnet (B.B).
Spiral Wound Gasket of Stainless Steel.
Integral or Renewable Hardfaced Seat.
Flanged End.
Piston or Swing Check Valve.
Specifications:
Basic Design:
Face to Face:
Flanged End:
Test and Inspect:
Standard Material:
Features:
Reduced or Full Port.
Outside Screw & Yoke Long Bonnet.
Spiral Wound Gasket of Stainless Steel.
Socket Weld (S.W) or Threaded End (T.E).
Renewable Hardfaced Seats.
Balancing Hole in Wedge.
Specifications:
Basic Design:
Socket Weld End (S.W):
Threaded End (T.E):
Test and Inspect:
Standard Material:
CLASS 300
CLASS 600
CLASS 150
CLASS 300
CLASS 600
CLASS 150
WEIGHT
CLASS 300
CLASS 600
inch
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb
kg
lb
kg
lb
kg
1/2
0.51
13
4.25
108
6.0
152
6.5
165
2.40
61
2.40
61
5.72
2.6
5.94
2.7
6.60
3.0
3/4
0.71
18
4.62
117
7.0
178
7.5
190
2.40
61
3.11
79
7.48
3.4
8.14
3.7
8.80
4.0
19
1
0.94
24
5.00
127
8.0
203
8.5
216
3.11
78
3.74
95
9.68
4.4
10.34
4.7
12.76
5.8
1 1/4
1.14
29
5.50
140
8.5
216
9.0
229
3.74
95
4.06
103
18.04
8.2
19.36
8.8
20.90
9.5
1 1/2
1.46
37
6.50
165
9.0
229
9.5
241
4.06
103
4.65
118
19.80
9.0
21.12
9.6
22.00
10.0
2
1.81
46
8.00
203
10.5
267
11.5
292
4.65
118
5.31
135
27.72
12.6
30.14
13.7
34.32
15.6
Reduced Port
Full Port
d
L
H (OPEN)
W
Weight
inch
inch
inch
mm
inch
mm
inch
mm
inch
mm
lb
kg
3/8
1/4
0.28
7
3.12
79
13.00
330
3.94
100
11.44
5.2
1/2
3/8
0.39
10
3.62
92
13.11
333
3.94
100
15.64
7.1
3/4
1/2
0.51
13
4.37
111
14.17
360
4.92
125
20.70
9.4
1
3/4
0.71
18
4.72
120
16.02
407
6.30
160
29.74
13.5
1 1/4
1
0.94
24
4.72
120
18.70
475
6.30
160
33.04
15.0
1 1/2
1 1/4
1.14
29
5.51
140
18.70
475
7.09
180
39.21
17.8
2
1 1/2
1.46
37
7.00
178
21.69
551
7.87
200
61.60
28.0
Features:
Fig. No. F12500T22
Fig. No. F12500S22
Features:
Welded Bonnet (W.B).
Compact Outside Screw & Yoke.
Socket Weld (S.W), Threaded End (T.E),
or Butt-Weld End (B.W).
Renewable Hardfaced Seats.
Specifications:
Basic Design:
Socket Weld End (S.W):
Threaded End (T.E):
Test and Inspect:
Standard Material:
Specifications:
Basic Design:
Socket Weld End (S.W):
Threaded End (T.E):
Butt Weld (B.W):
Test and Inspect:
Standard Material:
ANSI B16.34
ANSI B16.11
ANSI B1.20.1
ANSI B16.25
API-598
See Page 3
Piston Check
Valve W.B
Normal
Diameter
Reduced Port
Full Port
d
inch
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb
kg
lb
kg
1/2
0.51
13
7.32
186
8.5
216
8.58
218
4.92
125
15.4
7
24.86
11.3
3/4
0.51
13
7.32
186
9.0
229
8.58
218
4.92
125
15.4
7
27.50
12.5
1
0.71
18
7.32
186
10.0
254
10.20
259
6.30
160
30.8
14
34.32
15.6
1 1/4
0.94
24
9.13
232
11.0
279
12.60
320
7.09
180
49.5
22.5
39.16
17.8
1 1/2
1.14
29
9.13
232
12.0
305
12.60
320
7.09
180
50.6
23
45.98
20.9
2
1.46
37
10.98
279
14.5
368
13.78
350
7.87
200
61.6
28
78.10
35.5
L
H
Weight
inch
inch
inch
mm
inch
mm
inch
mm
lb
kg
3/8
0.28
7
3.12
79
2.40
61
3.08
1.4
1/2
3/8
0.39
10
3.12
79
2.40
61
2.64
1.2
3/4
1/2
0.51
13
3.62
92
2.56
65
3.08
1.4
1
3/4
0.71
18
4.37
111
3.11
79
5.06
2.3
1 1/4
1
0.94
24
4.72
120
3.74
95
8.58
3.9
1 1/2
1 1/4
1.14
29
5.98
152
4.06
103
12.3
5.6
2
1 1/2
1.46
37
6.8
172
4.56
118
19.6
8.9
1
3/4
0.71
18
4.37
111
3.31
84
4.18
1.9
1 1/4
1
0.94
24
4.72
120
3.98
101
7.48
3.4
1 1/2
1 1/4
1.14
29
4.72
120
4.72
120
9.90
4.5
2
1 1/2
1.46
37
5.51
140
5.24
133
16.06
7.3
Reduced Port
Full Port
d
L
H
Weight
inch
inch
inch
mm
inch
mm
inch
mm
lb
kg
3/8
0.28
7
3.12
79
2.40
61
2.64
1.2
1/2
3/8
0.39
10
3.12
79
2.40
61
2.20
1.0
20
3/4
1/2
0.51
13
3.62
92
3.07
78
2.42
1.1
Features:
Reduced or Full Port.
Lift, Piston or Swing Check Valve.
Bolted Bonnet (B.B) or Welded Bonnet (W.B).
Spiral Wound Gasket of Stainless Steel.
Socket Weld (S.W) or Threaded End (T.E).
Renewable or Integral Hardfaced Seat.
Specifications:
Basic Design:
Socket Weld End (S.W):
Threaded End (T.E):
Test and Inspect:
Standard Material:
Pistoan Check
Valve W.B
Specifications:
Basic Design:
Socket Weld End (S.W):
Threaded End (T.E):
Test and Inspect:
Standard Material:
Features:
inch
inch
inch
mm
inch
mm
inch
mm
lb
kg
3/8
0.28
7
3.62
92
2.56
65
6.60
3.0
1/2
3/8
0.39
10
4.37
111
3.12
79
6.60
3.0
3/4
1/2
0.51
13
4.37
111
3.12
79
7.48
3.4
1
3/4
0.71
18
4.72
120
3.82
97
10.56
4.8
1 1/4
1
0.94
24
5.98
152
4.09
104
15.18
6.9
1 1/2
1 1/4
1.14
29
6.77
172
4.72
120
23.54
10.7
2
1 1/2
1.46
37
7.87
200
5.47
139
32.12
14.6
1
3/4
0.71
18
4.72
120
3.82
97
9.46
4.3
1 1/4
1
0.94
24
4.72
120
4.13
105
13.42
6.1
1 1/2
1 1/4
1.14
29
5.51
140
4.72
120
19.4
8.8
OS & Y W.B
d
L
H
Weight
inch
inch
inch
mm
inch
mm
inch
mm
lb
kg
3/8
0.28
7
3.62
92
3.12
79
6.82
3.1
1/2
3/8
0.39
10
4.37
111
3.12
79
6.60
3.0
21
3/4
1/2
0.51
13
4.37
111
3.12
79
7.92
3.6
Reduced Port
Full Port
d
L
1 1/2
1.46
37
7.00
178
5.51
140
27.72
12.6
OS & Y B.B
H (OPEN)
W
B.B
Weight
W.B
inch
inch
inch
mm
inch
mm
inch
mm
inch
mm
lb
kg
lb
kg
3/8
0.28
7
3.62
92
6.65
169
3.94
100
10.34
4.7
8.80
4.0
1/2
3/8
0.39
10
4.37
111
7.75
197
4.92
125
10.12
4.6
8.56
3.9
3/4
1/2
0.51
13
4.37
111
7.75
197
4.92
125
10.12
4.6
8.56
3.9
1
3/4
0.71
18
4.72
120
9.30
236
6.30
160
13.86
6.3
12.76
5.8
1 1/4
1
0.94
24
4.75
120
9.69
246
6.30
160
19.14
8.7
17.66
7.8
1 1/2
1 1/4
1.14
29
5.5
140
11.14
283
7.09
180
26.60
12.2
24.64
11.2
2
1 1/2
1.46
37
7.0
178
13.00
330
7.87
200
37.80
17.2
35.20
16.0
Features:
Bolted Bonnet (B.B) or Welded Bonnet (W.B).
Spiral Wound Gasket of Stainless Steel and Flexible Graphite
with Controlled Compression.
Reduced or Full Port.
Compact Outside Screw & Yoke or Compact Inside Screw.
Renewable Hardfaced Seats.
Socket Weld (S.W) or Threaded End (T.E).
OS & Y W.B
Basic Design:
Socket Weld End (S.W):
Threaded End (T.E):
Test and Inspect:
Standard Material:
Features:
Specifications:
Specifications:
Basic Design:
Socket Weld End(S.W):
Threaded End (T.E):
Test and Inspect:
Standard Material:
OS & Y B.B
Reduced Port
Full Port
d
L
Outside Screw
& Yoke
H (OPEN)
Inside Screw
W
B.B
Weight
W.B
inch
inch
3/8
-
1/2
3/8
3/4
1/2
1
3/4
1 1/4
1
1 1/2
1 1/4
1 1/2
inch
mm
inch
mm
inch
mm
inch
0.28
7
3.12
79
6.22
158
6.65
0.39
10
3.12
79
6.22
158
6.65
0.51
13
3.62
92
6.70
169
7.20
0.71
18
4.37
111
7.76
197
8.19
0.94
24
4.75
120
9.30
236
10.60
1.14
29
4.75
120
9.68
246
11.42
mm
inch
mm
lb
kg
lb
kg
169
3.93
100
4.84
2.2
3.96
1.8
169
3.93
100
4.62
2.1
3.74
1.7
182
3.90
100
5.06
2.3
4.62
2.1
208
4.92
125
8.80
4.0
8.14
3.7
254
6.29
160
13.00
5.9
11.44
5.2
290
6.29
160
15.20
6.9
13.64
6.2
330
7.08 7.87 7.87
180
200 200
24.60 34.76 44.00
11.2 15.8 20.0
22.88 32.56
10.4 14.8
-
2 1/2
2
3
-
inch
1/2
3/4
1 1/4
1 1/2
inch
mm
0.39
10
0.51
13
0.71
18
0.94
24
1.14
29
1.46
37
inch
mm
7.32
186
7.32
186
7.32
186
9.13
232
9.13
232
10.98
279
inch
mm
3.12
79
3.90
98
4.33
110
4.33
110
6.69
170
6.69
170
Weight
lb
kg
14.52
6.6
25.96
11.8
38.72
17.6
37.18
16.9
47.3
21.5
46.86
21.3
22
Features:
Lift Check Valve.
Welded Bonnet (W.B).
Socket Weld (S.W) or Threaded End (T.E).
Integral Hardfaced Seat.
Specifications:
Basic Design:
Socket Weld End (S.W):
Threaded End (T.E):
Test and Inspect:
Standard Material:
Features:
Bolted Bonnet (B.B) or Welded Bonnet (W.B).
Spiral Wound Gasket of Stainless Steel and Flexible Graphite
with Controlled Compression.
Flanged End.
Compact Outside Screw & Yoke or Compact Inside Screw.
Renewable Hardfaced Seats.
Specifications:
Basic Design:
Face to Face:
Flanged End:
Test and Inspect:
Standard Material:
OS & Y W.B
inch
3/8
1/2
3/4
1 1/4
1 1/2
Class 800
inch
mm
0.39
10
0.51
13
0.71
18
0.94
24
1.14
29
1.46
37
1.81
46
Class 1500
inch
mm
0.39
10.0
0.51
13.0
0.67
17.0
0.91
23.0
1.18
30.0
1.46
37.0
1.83
46.5
Class 800
inch
mm
3.86
98
3.86
98
4.33
110
4.72
120
5.51
140
1.51
140
6.69
170
Class 1500
inch
mm
4.01
102
4.01
102
4.01
102
5.12
130
5.90
150
7.48
190
7.48
190
Class 800
inch
mm
3.30
84
3.30
84
3.30
84
4.01
102
4.40
114
4.49
114
5.71
145
Class 1500
inch
mm
3.54
90
3.54
90
3.98
101
4.92
125
5.19
132
5.63
143
7.99
203
Class 800
lb
kg
6.60
3.0
6.38
2.9
8.14
3.7
14.30
6.5
18.70
8.5
21.10
9.6
23.76
10.8
Class 1500
lb
kg
7.04
3.2
7.04
3.2
9.02
4.1
15.84
7.2
23.10
10.5
25.5
11.6
26.3
12.0
Weight
23
CLASS 300
CLASS 600
CLASS 150
CLASS 300
H (OPEN)
CLASS 600
W
CLASS 150
WEIGHT
CLASS 300
CLASS 600
inch
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
lb
kg
lb
kg
lb
kg
OS & Y B.B
1/2
0.39
10
4.25
108
5.5
140
6.5
165
6.20
158
6.70
169
3.94
100
9.9
4.5
10.6
4.8
13.0
5.9
3/4
0.51
13
4.62
117
6.0
152
7.5
190
6.70
169
7.80
197
3.94
100
11.4
5.2
13.7
6.2
16.3
7.4
4
1
0.71
18
5.00
127
6.5
165
8.5
216
7.80
197
9.30
236
4.92
125
19.8
8.2
20.5
9.3
22.9
10.4
1 1/4
0.94
24
5.50
140
7.0
178
9.0
229
9.30
236
9.70
246
6.30
160
25..3
11.5
30.8
14.0
35.6
16.2
1 1/2
1.14
29
6.50
165
7.5
190
9.5
241
9.70
246
11.10
283
6.30
160
27.5
12.5
34.1
15.5
38.5
17.5
2
1.46
37
8.00
203
8.5
216
11.5
292
11.10
283
12.60
320
7.10
180
44.7
20.3
51.5
23.4
62.3
28.3
Part
No.
Part Name
Carbon Steel
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Body
Bonnet
Stem
Disc
Seat Ring
Bonnet Bolt (a)
Gasket
Gland
Packing
Gland Flange
Gland Bolt
Gland Bolt Nut
Gland Bolt Pin
Sleeve
Sleeve Washer
Handwheel
Nameplate
Handwheel Nut
Alloy Steel
A 105
(b, c)
A 105
A 105
A350
LF2
F5
F11(d) F22
LF2
F5
F11
F22
LF2
F5
F11
F22
A276 - 410
A276 - 420
A276 - 410 + STL
A193 - B7 A320 - L7
A193 - B16
304 + Graphite
A276 - 410
Flexible Graphite
A105
LF2
F11
A193-B7 A320-L7
A193 - B16
A194-2H
A194-7
A194 - 4
A276 - 410
Stainless Steel
A182
F304 (e)
F304L
F304
F304L
F304
F304L
A276 - 304 A276 - 304L
304 + STL 304L + STL
304 + STL 304L + STL
A193 - B8
A276 - 304
F316(e)
F316
F316
A276 - 316
316 + STL
316 + STL
F316L
F316L
F316L
A276 - 316L
316L + STL
316L + STL
A193 - B8M
316 + Graphite
A276 - 316
PTFE
CF8
A193 - B8 / B8M
A194 - 8
A276 - 304
F51
F51
F51
F51
F51
F51
F51
F51
F51
A276 - 410
A276 - 410
A197
Aluminum
304
A108 - 1020
mm
35
in.
1.38
mm
11.5
in. mm
0.44
43
51
1.69
2.00
13.0
14.3
0.50
0.56
64
73
2.50
2.88
15.8
17.5
92
35
3.62
1.38
43
51
64
Number
of Bolts
in.
mm in.
16 0.62
16
16
0.62
0.62
0.62
0.69
16
16
0.62
0.62
19.5
14.3
0.75
0.56
20
16
0.75
0.62
1.69
2.00
2.50
15.8
17.5
19.5
0.62
0.69
0.75
20
20
20
0.75
0.75
0.75
73
92
2.88
3.62
20.6
22.5
0.81
0.88
22
20
0.88
0.75
35
43
1.38
1.69
14.3
15.8
0.56
0.62
16
20
0.62
0.75
51
64
2.00
2.50
17.5
20.6
0.69
0.81
20
20
0.75
0.75
73
92
2.88
3.62
22.5
25.4
0.88
1.00
22
20
0.88
0.75
1.6
1.6
6.4
0.06
0.06
0.25
Notes:
a. Temperature limitations on bolting are as following:
Gr B7,1000F(538C); Gr L7,1000F(538C);
Gr B16,1100F(595C); Gr B8-CL1,1500F(816C);
Gr B8M-CL1,1500F(816C); Gr B8-CL2,1000F(538C);
and Gr B8M-CL2,1000F(538C).
b. Upon prolonged exposure to temperatures above
800F(425C), the carbide phase of carbon steel
may be converted to graphite.
c. Only killed steel shall be used above 850F(455C).
d. Use normalized and tempered material only.
e. At temperatures over 1000F(538C), use only
when the carbon is 0.04 percent or higher.
Gate Valve
3
Schedule 80
Schedule160
Schedule xx-stg
(in.) D3
1/4 13.7
D2
7.7
t
3.0
D3
-
D2
-
t
-
D3
-
D2
-
t
-
3/8
1/2
17.1
21.3
10.7
13.9
3.2
3.7
21.3
11.8
4.8
21.3
6.4
7.5
3/4
1
26.7
33.4
18.8
24.4
3.9
4.5
26.7
33.4
15.6
20.7
5.6
6.4
26.7
33.4
11.9
15.2
7.8
9.1
11/2
2
48.3
60.3
38.1
49.3
5.1
5.5
48.3
60.3
34.0
42.9
7.1
8.7
48.3
60.3
27.9
38.2
10.2
11.1
24
Ty p e
1 = Gate
2 = ASTM A182 F5
3 = ASTM A350 LF3
2 = Globe
3 = Y Pattern Globe
4 = Piston Check
5 = Lift Check With Spring
Tolerance on Product.
Eo = D-(0.050D+1.1)p
p = Pitch
E1(d) = Eo+0.0625L1
L2 = (0.80+6.8)p
Dimensions in inches
P
Eo
E1 (a)
L1 (b)
L2 (c )
Normal
pipe size
Outside
diameter
of pipe
D
Number
of threads
per inch
Pith
of thread
Pich diameter
at beginning
of external
thread
Pich diameter
at end
of external
threads
Normal
engagement by
and between
external and
internal threads
Lengh
of effective
external thread
Height
of thread
1/16
1/8
0.3125
0.405
27
27
0.03704
0.03704
0.27118
0.36351
0.28118
0.37360
0.160
0.1615
0.2611
0.2639
0.02963
0.02963
1/4
3/8
0.540
0.675
18
18
0.05556
0.05556
0.47739
0.61201
0.49163
0.62701
0.2278
0.240
0.4018
0.4078
0.04444
0.04444
1/2
3/4
0.840
1.050
14
14
0.07143
0.07143
0.75843
0.96768
0.77843
0.98887
0.320
0.339
0.5337
0.5457
0.05714
0.05714
1
11/4
1.315
1.660
11.5
11.5
0.08696
0.08696
1.21363
1.55713
1.23863
1.58338
0.400
0.420
0.6828
0.7068
0.06957
0.06957
11/2
2
1.900
2.375
11.5
11.5
0.08696
0.08696
1.79609
2.26902
1.82234
2.29627
0.420
0.436
0.7235
0.7565
0.06957
0.06957
Code
Pressure Class
15 = Class 150
30 = Class 300
40 = Class 400
60 = Class 600
80 = Class 800
90 = Class 900
6 = Swing Check
7 = Y Pattern Check
8 = Needle Globe
9 = Cryogenic Gate
0 = Cryogenic Globe
X = Special
B = Ball Valves
W = Wellhead Valves
WB = Wafer Butterfly Valves
E x a m p l e : 2- F180 0 S 21
End Connection
Above information extracted from American National Standard for Pipe Threads,
ANSI B1.20.1
DEPTH
DIA
Dimensions
Normal
Pipe Size
NPS
DN
1/4
8
3/8
10
1/2
15
3/4
20
1
25
11/4
32
11/2
40
2
50
Socket Depth
Min.
inch
mm
0.38
9.6
0.38
9.6
0.38
9.6
0.50
12.7
0.50
12.7
0.50
12.7
0.50
12.7
0.62
15.8
Trim Material
Seat
Disc
Stem
1 = 13CR
2 = HF
13CR
HF
F6
F6
3 = HF
4 = MONEL
13CR
F6
MONEL MONEL
5 = 316SS
6 = HF
316SS F316
MONEL MONEL
7 = HF
8 = 304SS
316SS
304SS
F316
F304
9 = 304L
0 = 316L
304L
316L
304L
316L
A = F51
F51
B = Inconel 625
X = Special
F51
Bonnet Connection
1 = Bolted Bonnet - Full Bore
2 = Welded Bonnet - Full Bore
3 = Bolted Bonnet - Reduced Bore
4 = Welded Bonnet - Reduced Bore
Table of Contents
Quotation
Introduction
All prices are F.O.B. shipping point unless otherwise agreed or specified in the quotation. Prices are
valid only for the duration indicated in the quotation and are subject to change without notice. Prices
also do not include any federal, state or local taxes or other government charges.
Quality is our commitment, while competitive price and timely delivery is our promise.
From the beginning, the DHV name has become associated with quality in every step of our
manufacturing process. For the past decades our customers worldwide have trusted us to provide
Design changes
We reserve the right to institute changes in material ,design and specification without notice.
them with consistent and reliable valve products in their most severe and critical service.
We at DHV are proud of our ability to meet the stringent requirements of Refining, Gas/Oil, Pipeline,
Cancellation or changes
Orders placed with us are not subject to cancellation or changes without our prior consent. A cancel-
DHV Forged Steel Valves are designed, manufactured and tested to the latest manufacturing
specifications of the American & International Standards Organizations. We welcome your chal-
Delivery
We will not be responsible for delays or failure to deliver due to causes beyond our control.Delivery of
material to a common carrier shall be considered delivery to the Buyer .Claims for loss or any dam-
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Connection Ends
Flanged End & Buttweld End
Taper Pipe Thread End (NPT) and Socket Weld End (S.W)
24
25
26
age to material in transit shall be filed by the Buyer direct with the carrier. Claims for any shortage,
corrections or deductions must be made in writing within 10 days after receipt of goods.
Return of goods
Any return of goods will not be accepted without our prior authorization.Return goods should be of
our manufacture, in clean and salable condition. A minimum charge of 35 percent of the invoice price
will be made to cover the cost of handling and reconditioning. The freight for return goods shall be
prepaid by Buyer.
Limited warranty
DHV Industries,Inc. warrants to the original Buyer, not any third party, for products of our manufacture, for a period of one year after date of shipment, that its products will be free from defects in
materials and workmanship under proper and normal use.
Any claim for defect goods should be by written notice to DHV Industries,Inc. immediately upon
discovery. NO warranty shall apply to our product which has been modified or changed in design or
function, misused, or impropery maintained. DHV Industries,Inc.shall be able to inspect claimed
defects at original buyers facility to determine its obligation.Without authorization of DHV Industries,
Inc. any repair labor or material is not allowed. No goods may be returned without permission from
DHV Industries,Inc.
This warranty does not extend beyond original sale price and does not extend to any claim for labor.
Consequential damages, losses,whether directly or indirectly suffered or in any other manner relating
to the defects.
26
Please visit our DHV website: www.dhvindustries.com or www.dhvvalve.com for a copy of our API 6D
monogram certificate. Customer and Project referrals are available upon request. For certified data
and current specifications, please contact us or your local DHV agent. Information provided in this
DHV reserves the right to discontinue the manufacture or change and modify our design and construction of any DHV product, in due course of our manufacturing procedure without incurring any obligation
to accept for credit, to replace or furnish or install such changes or modifications on products previously
Website: www.dhvvalve.com
or subsequently sold.