Professional Documents
Culture Documents
ARM Processors: Proposal For Embedded Training On
ARM Processors: Proposal For Embedded Training On
ARM Processors
Audience:
Fresh or up to 2 / 3 years experienced hardware and BSP engineers, who have basic knowledge or work experience with microprocessors / micro controllers, would get benefited on ARM series of processors. The training will be aimed to have actual industrial design exposure. ARM processors are widely used in industrial & consumer applications due to its high-end performances.
Schedule:
1. Regular Course: 5 days a week for 3 weeks 2. Workshop: 2 days 3. Crash Course: On weekend (Saturday & Sunday) for 1 weekend
Fees : 7000 Rs
Syllabus:
1. Introduction to microprocessors & microcontrollers a. Microprocessors & microcontrollers b. Embedded Designs c. Parameters for selecting a microprocessor / microcontroller d. ARM Architecture e. Various ARM variants in the market f. PXA-255 Processor Architecture 2. Hardware Description for PAX-255 a. Pinout and Pin Description b. GPIO operation and interfacing c. Memory management d. Interrupts e. Operating modes f. On Chip Peripherals g. Hardware Example 3. Software a. Register map b. Memory map c. Instruction set d. Addressing modes e. GIPO operation f. Peripheral Operation g. Interrupt operation 4. Practical and assignments a. Memory design & operations b. GPIO design & operations c. On-Chip Peripheral operations d. Interrupt operations
Schedule: Regular Course Session 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Topic Introduction ARM Architecture ARM Architecture contd. ARM Architecture contd. PXA-255 Architecture PAX-255 Pinout & pin description PXA-255 GPIO, Memory & Interrupts PXA-255 Operating Modes PXA-255 On-Chip Peripherals PXA-255 On-Chip Peripherals Contd. PXA-255 On-Chip Peripherals Contd. PXA-255 On-Chip Peripherals Contd. Assignment 1 Assignment 2 Remark
Each Session of approx 2 hours. The crash course and workshop contents will be almost same; however duration will be reduced, by reducing theoretical part.