Professional Documents
Culture Documents
6 Design of Trailer Beam: 6.1 Sectional Properties
6 Design of Trailer Beam: 6.1 Sectional Properties
M = I y
= Allowable stress = y = Depth to neutral axis = I = Second moment of area
y= I=
M =
I
Y
27 kN m
M=
T = A
T = Maximum tension allowed A = Cross sectional area = A= T= 235 N/mm 2212 mm 520 kN
From the figures of bending moment diagrams and axial force diagrams, it can be noted that the observed values are much lower than these values and therefore, the safety is confirmed. Maximum deflection observed is 3.4 mm at the midspan of edges. This is a quite reasonable value.
M =
WL 8
W =
8M L
27 kN m 0.742 m 296.41 kN
M= L= W
6.5 Deflection
Deflection at yield point
WL3 = 48 EI
= Defection
But in practical situations the deflection is not allowed to exceed span/800 L/800 = 0.9275 mm
Therefore, the load relevant to that deflection have to be taken as maximum allowable load. W kN 296 241 mm 1.14 0.93
241 kN