Professional Documents
Culture Documents
WI, AcReCriteria For Plate Welds
WI, AcReCriteria For Plate Welds
1 ACCEPTANCE LEVELS
SPECIFICATION BW/VI/00
PLATE ONLY
Key
DEFECT NAME Excess penetration* Undercut Angular misalignment Arc strike / Stray flash Linear misalignment
6 7 8 9 10 11 12 13 14
Cracks Overlap Lack of side wall fusion Porosity / Gas Pores / Elongated gas cavities, pipes Lack of root fusion Lack of root penetration Root concavity Incomplete filled groove Excess weld metal*
MAXIMUM ALLOWANCE 2.0 mm D maximum 10% up to maximum D 1.5 mm Accept Not permitted Maximum D t < 10 mm 0.8 mm t > 10 mm 1.0 mm Not permitted Accumulative total for both shall not 25 mm in weld face exceed 30 mm length Maximum dimension of any area or individual (as applicable) Accumulative total for both defects shall not exceed 30 mm 1.5 mm 25 mm in root length Maximum D 1 mm Not permitted 2 mm D maximum
REMARKS
15 16
Smooth transition required. All runs shall blend smoothly. No lack of interun fusion Dependent on depth and blend Accumulative total shall not exceed 20 mm L in weld length (root & face independent)