1. Mark the rows of dots onto
the wrong side of the fabric. Use
a long strand of sewing thread
for the gathering, working each
row from right to left. Begin by
knotting the thread and making
a small backstitch. Work along
the rows horizontall ing up
each dot or corner of a check
with a tiny stitch. Leave the 2
ends of the gathering threads 3 Honeycomb stitch is worked
hanging down at the end of each from left to right, taking up
row ready to pull up, two folds with two stitches each
SRR
sesenmanes
4 Trellis stitch makes zigzag
rows which combine to create
a diamond pattern. Begin at the
top left and work downward.
Make a stitch over two folds,
bring the needle out between
the folds and make another
SE
stitch over the next two folds.
Continue in-this way to the
bottom point of the zigzag, then
work upward. (Stitches should
be the same distance apart),
Ser
ae
2 After drawing through all the
gathering threads, pick up all
the ends and pull them taut.
Gather up the fabric to the
given width, making sure that
the folds are equally distributed.
Fasten off the thread ends in |
pairs. Then embroider the folds Z
from the right side, keeping 5 Herringbone stitch is a decorative stitch in smocking, Begin at the
the thread fairly loose to top left corner and work from left to right, taking up two folds with
enable the work tohave an elas- each stitch. The lower row of stitches is worked in staggered
tic quality. When complete, formation to the upper row by taking up the last fold of the pair
pull out the gathering threads. just worked with the next fold along.
time. Two rows are worked at
the same time, joining the
folds in a staggered formation.
The thread is ‘guided through
the last fold of one pair to the
next row, alternately upward and
downward. This form of smock-
ing is very elastic, enabling
the bodice to stretch well.