Wade P PDF

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Non-freeze water points

Non-freeze water points


The Wade non-freeze water point provides an external water source for plant watering, area cleaning, vehicle wash down and similar activities. The product is designed to be installed with the valve seal located inside a building, whilst the on/off control mechanism and hose connections are outside; when the valve is turned off, water drains out from the unit so that freezing cannot occur. Made to suit a given wall thickness the product can be supplied with a wall box with optional locking cover to deter unauthorised access. The Wade non-freeze water point is a UK Water Byelaws Scheme Approved Product

YA1
Wall thickness 70mm min. available in 10mm increments
3/4"

58 BSP inlet 43 Dia.

64 32

95 x 43 11/4" BSP backnut Operating key


1/2"

50 115

Brass quick tap connector


3/4"

YA2
Wall thickness 130mm min. available in 10mm increments 53 150 x 90 68

BSP connection

110 7

WADE

61

170 50

Cautionary note Water points are non-freeze only when installed in the horizontal position, and are suitable for use only at normal mains supply pressure (up to 10 bar maximum).

Hinged cover

Wall box

YA3
Wall thickness 130mm min. available in 10mm increments 56 70 110

144 x 84

61

170 50

Hinged cover

Wall box

Options
Spec. Code YA101 + wall thickness mm YA211 + wall thickness mm YA212 + wall thickness mm YA213 + wall thickness mm YA304 + wall thickness mm YA316 + wall thickness mm Wall box material/nish Without wall box Aluminium white epoxy coated Nickel bronze satin Gunmetal satin Stainless steel grade 304 satin Stainless steel grade 316 satin

Installation notes 1. Install with inlet end on the inside of the building, in compliance with Water Regulations, Schedule 2, paragraph 15 (backow prevention), as applicable to the installation's uid category (determined by specier). 2. Flush supply pipework before connecting. 3. Connect, and check for leaks if leaking, remove centre stem assembly, examine and clean washer and seating, re-assemble and again check for leaks.

Sufx L Locking cover. (Only available on versions with wall box). Other nishes Details on request. Material Water point: Cast gunmetal, copper tube, brass rod, malleable iron backnut. Wall box material see table.

Tel: +44(0)1787 475151

Fax: +44(0)1787 475579

E-mail: tech@wade.eu

Web: www.wade.eu

November 2012

WP

You might also like