Professional Documents
Culture Documents
PR-0098 (A) NXT To CPT Over Label Instructions and Return Form
PR-0098 (A) NXT To CPT Over Label Instructions and Return Form
PR-0098 (A) NXT To CPT Over Label Instructions and Return Form
After successfully upgrading an NXT to a CPT, including all hardware and software, relabeling is required. 1. Inside the Software Upgrade Kit, p/n UPG-2G-TB you will find three over labels including: RF Generator, p/n 42812 (A) TG-TB-UPG part ID, p/n 42813 (A) Power output, p/n 42842 (A) 2. Affix the RF Generator over label and TG-2B-UPG over label as shown Before After
p/n 42812 (A) RF GENERATOR
4. Sign and date this form. Return to Solta Medical by folding and including with the returning, completed IFU software upgrade form, in the self addressed envelope included in the Software Upgrade package (see p/n 10204-2.0.4, Software Upgrade and IFU form 42798 Software Upgrade Procedure/Form).
___________________________
CONFIDENTIAL: Do Not Copy Without Written Permission From Solta Medical This document not controlled unless stamped CONTROLLED with red ink
Page 1 of 1