This document is a trip cost estimator that calculates the cost of a trip based on mileage, gas mileage, and gas price. The user entered 1200 miles round trip, a gas mileage of 15.0 mpg, and a gas price of $1.56 per gallon. Based on these inputs, the estimated cost of the trip is $124.80.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online from Scribd
Here they have a slightly different term on the installation instructions. 1. Install clutch master cylinder (1). 2. Insert tube into master cylinder port and install retaining clip (5). 3. Connect clutch master cylinder supply hose (2) to brake master cylinder reservoir (1). 4. Verify that brake master cylinder reservoir is full and cap is off. 5. Position clutch master cylinder body vertically, with pushrod pointing down, for about ten seconds to purge air trapped from end of cylinder. 6. Install clutch master cylinder body to dash panel and 1/4 turn to secure. 7. Connect clutch master cylinder rod to clutch pedal pin. An audible "click" should be heard. 8. Install lower instrument panel bezel. 9. Connect battery negative cable. 10. Install air cleaner assembly (1). 11. Verify that brake master cylinder reservoir is full. Top off with DOT 3 brake fluid if necessary. 12. Bleed clutch system (More info on this is available too, if needed). 13. Actuate clutch pedal a minimum of fifteen
This document is a trip cost estimator that calculates the cost of a trip based on mileage, gas mileage, and gas price. The user entered 1200 miles round trip, a gas mileage of 15.0 mpg, and a gas price of $1.56 per gallon. Based on these inputs, the estimated cost of the trip is $124.80.
This document is a trip cost estimator that calculates the cost of a trip based on mileage, gas mileage, and gas price. The user entered 1200 miles round trip, a gas mileage of 15.0 mpg, and a gas price of $1.56 per gallon. Based on these inputs, the estimated cost of the trip is $124.80.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online from Scribd
This document is a trip cost estimator that calculates the cost of a trip based on mileage, gas mileage, and gas price. The user entered 1200 miles round trip, a gas mileage of 15.0 mpg, and a gas price of $1.56 per gallon. Based on these inputs, the estimated cost of the trip is $124.80.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online from Scribd
Here they have a slightly different term on the installation instructions. 1. Install clutch master cylinder (1). 2. Insert tube into master cylinder port and install retaining clip (5). 3. Connect clutch master cylinder supply hose (2) to brake master cylinder reservoir (1). 4. Verify that brake master cylinder reservoir is full and cap is off. 5. Position clutch master cylinder body vertically, with pushrod pointing down, for about ten seconds to purge air trapped from end of cylinder. 6. Install clutch master cylinder body to dash panel and 1/4 turn to secure. 7. Connect clutch master cylinder rod to clutch pedal pin. An audible "click" should be heard. 8. Install lower instrument panel bezel. 9. Connect battery negative cable. 10. Install air cleaner assembly (1). 11. Verify that brake master cylinder reservoir is full. Top off with DOT 3 brake fluid if necessary. 12. Bleed clutch system (More info on this is available too, if needed). 13. Actuate clutch pedal a minimum of fifteen