Professional Documents
Culture Documents
Simulation of LPF
Simulation of LPF
V++
12.00V R IN -25.38uV 318.3 V2 0V 2Vac Vs 0Vdc 0.1uF 0V C -6.125uV V-R1 -12.00V 1k 1k R2 V-3 U1 + 7
V+
5 6 1 12Vdc OUT
V++
12.00V
uA741
C
V1
-12.00V
73.64uV 12Vdc V2
0V
0V
B
I choose the CUT-OFF frequency = 5Khz We know that f = 1/2* 3.14 * R * C I choose C = 0.1uF. Then calculate the value of R = 318.30 ohm
A
The Gain of this Filter depends on the resistances R1 and R2. We know the close loop gain of a Non-inverting Amplifier is = 1+(R1 / R2) Here R1 = R2 = 1Kohm.So the gain of the Amplifier is(Av) = 2. In Decibel = 20*log(Av) = 6.02db
A
** Profile: "SCHEMATIC1-Tapas" [ F:\West Bengal State University\For Msc Perpose\PSpice Work\lpf-schema... Date/Time run: 04/04/11 11:37:44 Temperature: 27.0 (A) lpf-SCHEMATIC1-Tapas (active) -0 (4.9924K,-3.0043) -3db Point -10
-40
1.0KHz
Fc
100KHz
** Profile: "SCHEMATIC1-Tapas" [ F:\West Bengal State University\For Msc Perpose\PSpice Work\lpf-schemati... Date/Time run: 05/07/11 11:46:28 Temperature: 27.0 (A) lpf-SCHEMATIC1-Tapas (active) -0d
-40d
-80d
-120d
1.0KHz
100KHz