LGE 2011.10.

24

Since initial S/W is not stable yet, Please use #9 Key to switch off the phone instead of using airplane mode.

##468 Send

LTE Detach

LTE Attach

Settings > Wireless & networks > Tethering & portable hotspot > USB tethering

Click Wireless & networks in Setting menu

Click Tethering & portable hotspot

Check USB tethering

Verify USB tethering connected via LGE AndroidNet NDIS interface

LTE Secondary (B25) Loss : 0.7 dB

LTE Primary (B25) Loss : 0.7 dB

To remove a RF cable from the phone, please push aside RF cable header gently. Do not remove the RF cable by force.

1. Find USB Driver Folder in the package.

2. Run LGUnitedMobileDriver_S4981CAN34AP22_ML_WHQL_Ver_3.4.exe
3. When you Connect the UE to your pc. PC install two diag ports and one modem. 4. Please check port number in the device manager of windows before using tools.

Modem Port

Diag Port for LTE

Diag Port for 1x

Click Settings

Click Wireless & networks

Click Mobile networks Click Network settings

Click Access Point Names

Add/Del/Edit APN List

Click APN

Change APN

Click Menu Key And Save

##33284# Send

Click LTE Engineering

Cell information

##468 Send

Click blank

Input 000000

Click LTE Setting

Click LTE Setting

Click GCF Test Mode

Disable Ipv6 Support Enable IPv4 Support(Default)

Click LTE Setting

Click PDN Setting

Check PDN Type for connecting PDN which you want

Check PDN for first connecting PDN which you want

Check PDN Type for connecting PDN which you want

Click LTE Setting

Click APN Setting

Add/Del/Edit APN List

Add/Del/Edit APN List

Click APN

Change APN

Click Menu Key And Save

Check port #

Check port Speed

- Command : adb kill-server - Explain - kill adb process - Please use if you cant connect adb - Command : adb shell - Explain - run to adb

- Command : netcfg - Explain - IP address check on UE

- Explain - rmnet_sdio0 is received IP address from NW