Professional Documents
Culture Documents
Material 1.2767 - 45NiCrMo16
Material 1.2767 - 45NiCrMo16
45NiCrMo16
EN ISO 4957 : 2002 1.2767 Mn% P% max 0,030 + 0.005
Chemical composition
C% Si% 0,40-0,50 0,10-0,40 0,20-0,50 0.02 0.03 0.04 Permissible deviations on the product S% max 0,030 + 0.005 Cr% 1,20-1,50 0.05 Mo% 0,15-0,35 0.05 Ni% 3,80-4,30 0.07
Temperature C
Hot forming 1050-850 Quenching heating up to 680 pause, after 840-870 oil, polymer (HRC 54-58) forced air (HRC 53-57) Stress relieving 50 under the temperature of tempering Tempering immediately after quenching 200-600 air minimum 2 cycles Stress relieving annealing 1) 630 furnace cooling to 350 after air Preheating welding 350 AC1 AC3 640 740 Annealing must be done after machining and before quenching
1)
Mechanical properties
Tempering table values at room temperature for 25 mm after quenching oil at 880C HB 577 577 560 543 512 482 455 432 HRC 56 56 55 54 52 50 48 46 N/mm2 2160 2160 2070 2010 1880 1760 1640 1520 Tempering at C 50 100 150 200 250 300 350 400 Thermal expansion [m/(mK)] 10-6 Modulus of elasticity long. N/mm2 Modulus of elasticity tang. N/mm2 Testing at C Specific heat capacity J/(KgK) 460 Density Kg/dm3 7.85 11.7 208000 79000 20 12.5 13.0 409 44 1430 450 13.4 390 42 1340 500 13.7 371 40 1250 550 353 38 1180 600 13.8
100
200
300
400
500
600
Steel for medium and great moulding - high hardenability - is supplied in the annealed condiction in order to be engraved before the quenching and tempering - self-hardening steel, good toughness - during the heat treatment he is little sensitive to the deformations - applications: plastic mouldings, roller for hot workings, creasers, scroll shears