Professional Documents
Culture Documents
Power Calculation - Milling: Calculating The Power Demand
Power Calculation - Milling: Calculating The Power Demand
Pc =
Q 396,000
kc
vf ae
Calculating Average Chip Thickness, hm, and Cutting Force Per inch2, kc
Use the formula below or use the table on page 282283. For ae/D > 30% 360 fz ae D e For ae/D < 30%
hm =
sin
hm = fz
ae sin D
kc =
1.01 o m ( .04 ) h
mc
kc1.1
hm = Average chip thickness inch fz = Feed per tooth inch/tooth ae = Width of cut inch D = Cutter diameter inch e = Engagement angle (see table below) = Cutting edge angle
kc o
= Cutting force/in2 Lbf/inch2 = Effective rake angle (Rake angle of cutter (o) + rake angle of insert) hm = Average chip thickness inch mc = Exponent (see page 297) kc1.1 = Cutting force for .04 inch chip thickness Lbf/inch2
Engagement Angle
Engagement ae/D Engagement Angle e
Effective Rake Angle, mc-Factor and kc1.1-Value Effective rake angle value can be found on the insert pages. Add the value of the actual cutter. The mc-exponent and the kc1.1-value for each material group can be found on page 297.
100%
5%
26
e
Engagement angle can be read from a simple drawing using a graduated arc.
10%
37
25%
60
Example
Calculate power demand for a face milling cutter: 220.13, 6.30, z = 7 Insert: SEKR42AFTN-ME13 T25M. Material group Depth of cut ap Width of cut ae Cutter position Feed per tooth fz Cutting speed vc =3 = .197 inch = 4.72 inch = center = .0083 inch/tooth = 705 ft/min
Calculate Average Chip Thickness, hm ae/D = 4.72/6.30 = 75% Engagement angle e = 97 (see table above) 360 .0083 4.72 sin 45 = .0052 inch 6.30 97 Calculate Cutting Force Per mm2 kc See page 309 Material Group 3 Rake angle for cutter = 12 (page 42) Rake angle for insert = 24 (page 253) kc1.1-value = 218,000 Lbf/in2 mc-exponent = 0.25 Effective rake angle o = 36 Average chip thickness hm = Cutting force per inch2 kc = Calculate Power, Pc Efficiency = 80% 23.06 Power Pc = 396,000 0.80 10.01 36 (.0052) .04
.25
Calculate RPM and Feed Speed See formula on page 277 n= 705 12 6.30 = 428 RPM
232,354 = 16.9 HP