Professional Documents
Culture Documents
Catalog - Sensors (En)
Catalog - Sensors (En)
Sensors Catalogue
Issue: February 2012
SM
Introduction
Overview
Schneider Electric - the single source for all your sensor and input device needs
This catalogue presents the comprehensive sensor and input device portfolio from Schneider Electric. By dealing with one trusted supplier, our customers save time and money, fully confident of the quality, performance and value of the Schneider Electric offer. For further information on sensor and input Device products visit the Buildings Business Extranet at: http://extranet.tac.com/ (registration requirement applies) or contact your local Schneider Electric sales office.
Sensor
Temperature
Outdoor Duct Living Space Pipe Surface Mounted Duct Averaging
Humidity/Temperature
Outdoor Duct Living Space Condensation
Air Quality
CO CO2 Smoke
Flow/Pressure
Duct Water Flow
Light/Multi-Sensor
Outdoor Living Space Multi
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
Table of Contents
Temperature Sensors
27
Humidity Transmitters
29
Pressure Transmitters
35
43
Smoke Detectors
49
Light Transmitters
53
Appendix A
56
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
We offer a wide range of temperature sensors for Living Space, Duct, Pipe and Outdoor Applications. The range has been designed for ease of installation, pleasing aesthetics, and full compatibility with The various Schneider Electric Systems.
STR100 Series
The STR range of wall modules are designed to provide temperature sensing in a wide variety of Living Space Applications. Contemporary design ensures they are suitable for installation in both new and existing buildings. The STR wall modules are designed to be mounted directly onto the wall or a back box/Jbox. The base plate is designed to be compatible with a wide range of global fixing methods.
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
Mode indicator
Xenta OP jack
Setpoint offset
Bypass button
X X X X X
Auto-Off-On A-0-I-II-III
Please refer to data sheet for full details. The STR300 is an electronic living space transmitter that converts a measured temperature into an electric current signal. The transmitter is delivered as a complete unit, comprising a Pt100 classB sensing element and an amplifier mounted in a housing. STR300 is intended either for surface mounting on a wall or installation in a standard switch box in dry, dust free rooms.
STR300 Series
Specifications
Output Range Accuracy Supply 0-10 V 0 to 40C 0.5C at 25C 15-30 Vdc
Description
Living Space Temperature Transmitter STR300
System
All
The STR150 is a wall module optimised for public facilities such as office buildings, hotels, hospitals, schools and shopping malls. Its attractive appearance and well designed interface makes is suitable for any contemporary building. It is easy to operate and install. STR wall modules are mounted directly on the wall or onto a back-box / J-Box and the base plate is designed to be compatible with any global fixing method. The STR150 is equipped with an LCD for displaying information.
STR150 Series
Specifications
Range Accuracy Resolution Supply 5 to 45C 0.5C at 15 to 30C 0.1 t0 0.5C From controller
004602800
STR150
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
STR250 Series
STR wall modules are optimised for public facilities such as office buildings, hotels, hospitals, schools and shopping malls. Their attractive appearance and well designed interface makes is suitable for any contemporary building. They are easy to operate and install. STR wall modules are designed to be mounted directly on the wall or onto a variety of back-boxes / J-Boxes. The plug-in concept makes wiring quick and easy. The STR250 replaces the I/STAT LCD with regard to major functionality such as indoor and outdoor temperature indication, setpoint adjustment, bypass mode and fan speed commands. The STR250 can be used with the 7728, MRs, and Xenta 102-AX controllers. All local configuration is carried our using an M/STAT module.
Specifications
Range Accuracy Resolution Supply 5 to 45C 0.5C at 15 to 30C 0.1 t0 0.5C selectable From controller
STR350/351 Series
The STR350 and STR351 use LON communication to display and control the room temperature and fan speed. Optionally, one lighting group and/or one sunblind group can be controlled. The STR350/351 can also be used in TAC Vista Classic configurations, that is, without the need for separate binding tool. Both models, STR350 and STR351, have an extra analogue (0-10Vdc) input that can be connected to a CO2, relative humidity or occupancy sensor. The STR350 and STR351 are equipped with an LCD display (STR351 with backlight) that displays the different functions of the module. STR wall modules are mounted directly on the wall or onto a backbox.
Specifications
Range Accuracy Resolution Supply 5 to 45C 0.6C 0.1 or 1C 24Vac
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
Specifications
Output Range NTC Thermistor, Balco, or Platinum Resistance 0-50C (32F to 122F) Max. 90% RH non-condensing
Full details of the product can be found on the data sheet. For Accuracy see Appendix A table G.
Part number
004607000 004607100 004607200
Model number
STR800 STR801 STR802F
Description
Living Space temp sensor Living Space temp sensor w/ASD jack Living Space temp w/F set point Adj. & Asd jack Living Space temp w/C set point Adj. & Asd jack Living Space temp w/warmer/cooler set, Point Adj. & Asd jack Living Space temp w/bypass & Asd jack Living Space temp w/bypassF set point Adj. & Asd jack Living Space temp w/bypassC set point Adj. & Asd jack Living Space temp w/ bypass/warmer/cooler set point Adj. & Asd jack Living Space temp sensor Living Space temp sensor
Compare to
TSMN-57011-850 TSMN-90220-850
004607210
STR802C
TSMN-90230-850 TSMN-90250-850
004607410
STR804C
TSMN-90250-852
TSMN-81011 TSMN-58011
10
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
STD 100, 200 and 500 temperature sensors are intended for air duct mounting. The STD housing is equipped with a 20mm cut-out for the cable, a 20mm conduit gland nut and a mounting flange. Accuracy See Appendix A: Tables A, B, C
Part number
5123002010 5123004010 5123006010 5123008010 5123010010 5123012010 5123014010 5123030010 5123032010 5123034010 5123036010 5123038010 5123040010 5123042010 5123074010 5123078010 5123082010
Model number
STD100-50 STD100-100 STD100-150 STD100-200 STD100-250 STD100-300 STD100-400 STD200-50 STD200-100 STD200-150 STD200-200 STD200-250 STD200-300 STD200-400 STD500-150 STD500-250 STD500-400
Description
Duct Temperature Sensor STD100-50 Duct Temperature Sensor STD100-100 Duct Temperature Sensor STD100-150 Duct Temperature Sensor STD100-200 Duct Temperature Sensor STD100-250 Duct Temperature Sensor STD100-300 Duct Temperature Sensor STD100-400 Duct Temperature Sensor STD200-50 Duct Temperature Sensor STD200-100 Duct Temperature Sensor STD200-150 Duct Temperature Sensor STD200-200 Duct Temperature Sensor STD200-250 Duct Temperature Sensor STD200-300 Duct Temperature Sensor STD200-400 Duct Temperature Sensor STD500-150 Duct Temperature Sensor STD500-250 Duct Temperature Sensor STD500-400
System
TAC Vista, TAC Xenta TAC Vista, TAC Xenta TAC Vista, TAC Xenta TAC Vista, TAC Xenta TAC Vista, TAC Xenta TAC Vista, TAC Xenta TAC Vista, TAC Xenta TAC I/NET TAC I/NET TAC I/NET TAC I/NET TAC I/NET TAC I/NET TAC I/NET Andover Continuum Andover Continuum Andover Continuum
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
11
STD660
Part number
5126030000
Model number
STD660
Description
Duct Temperature Sensor STD660
The STD670 temperature sensor is intended for air duct mounting. The STD670 has a 1.5m fly-lead. Accuracy See Appendix A: Table F
STD670
Part number
5126040000
Model number
STD670
Description
Duct Temperature Sensor STD670
System
Satchwell
The STD150 and 550 are intended for measuring air temperature in fan coil applications or exhaust ducts. The sensors, which are made of stainless steel, are delivered with a 2m (6.5 ft.) cable, PVC sheathed overall. Mounting details such as screw and clamp are included with the product. Accuracy See Appendix A: Tables A, C
STD150, 550
Part number
5123058000 5126058400
Model number
STD150 STD550
Description
Duct Temperature Sensor STD150 Duct Temperature Sensor STD550
System
TAC Vista TAC Xenta Andover Continuum
12
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
Part number
5123060010 5123060020 5123086010
Model number
STD190 STD290 STD591
Description
System
Average Duct Temperature TAC Vista Sensor STD190 TAC Xenta Average Duct Temperature TAC I/NET Sensor STD290 Average Duct Temperature Andover Sensor STD591 Continuum
STD300
STD300 is an electronic temperature transmitter that converts the temperature measured into an electric current signal 4-20 mA. The transmitter is delivered as a complete unit, comprising a stainless steel immersion well, the sensing element and an amplifier, mounted in a housing. The transmitter is intended for immersion installation and is used for temperature measurement in air ducts. The transmitter shall be connected with a 2-wire cable, which serves both as power supply and for signal transmission.
Specifications
Output Range Accuracy Supply 2-Wire, 4-20 mA -50 to +50 C; 0 to 100 C 0.4 % of range Min. 15Vdc, Max. 36Vdc
Part number
006920141 006920121
Model number
STD300-300 0/100 STD300-300-50/50
Description
Duct Temperature Sensor STD300-300 0/100 Duct Temperature Sensor STD300-300-50/50
System
All All
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
13
STD400
Specifications
Output Range Accuracy Supply 2-Wire, 4-20 mA -50 to +50 C; 0 to 100 C 0.4 % of range 24Vac 10% or 15-36Vdc
Part number
006920681 006920701 006920721 006920741 006920761 006920781
Model number
STD400-04 0/100 STD400-04 -50/50 STD400-30 0/100 STD400-30 -50/50 STD400-60 0/100 STD400-60 -50/50
Description
Average Duct Temperature Sensor STD400-04 0/100 Average Duct Temperature Sensor STD400-04 -50/50 Average Duct Temperature Sensor STD400-30 0/100 Average Duct Temperature Sensor STD400-30 -50/50 Average Duct Temperature Sensor STD400-60 0/100 Average Duct Temperature Sensor STD400-60 -50/50
System
All All All All All All
14
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
Specifications
Output Range Available lengths Accuracy Supply 3-Wire, 0-10 V -50 to +50 C; 0 to 100 C 0.4m, 3m, 6m 0.4 % of range 24Vac 10% or 15-36Vdc
Part number
006920841 006920861 006920881 006920901 006920921 006920941
Model number
STD410-04 0/100 STD410-04 -50/50 STD410-30 0/100 STD410-30 -50/50 STD410-60 0/100 STD410-60 -50/50
Description
Average Duct Temperature Sensor STD400-04 0/100 Average Duct Temperature Sensor STD400-04 -50/50 Average Duct Temperature Sensor STD400-30 0/100 Average Duct Temperature Sensor STD400-30 -50/50 Average Duct Temperature Sensor STD400-60 0/100 Average Duct Temperature Sensor STD400-60 -50/50
System
All All All All All All
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
15
Temperature Sensors
STX140
Part number
5123310000
Model number
STX140
Description
Ground Temperature Sensor STX140
System
TAC Vista TAC Xenta
The sensor, which is made of stainless steel, is delivered with a 2m or 4m cable PVC sheathed overall. STX120 is intended for measuring water temperature in heating applications, mounted in a well/pocket. Accuracy See Appendix A: Tables A, D
STX120, 520
Part number
5123302000 5123304000 5123320000 5123322000
Model number
STX120-200 STX120-400 STX520-200 STX520-400
Description
Immersion Temperature Sensor STX120-200 Immersion Temperature Sensor STX120-400 Immersion Temperature Sensor STX520-200 Immersion Temperature Sensor STX520-400
System
TAC Vista TAC Xenta TAC Vista TAC Xenta Andover Continuum Andover Continuum
The STX122 is primarily intended for pipe mounting without a separate pocket in heating coils. The insert pipe is stainless steel. The sensor is delivered with a 2m connecting cable, and has a R1/4 (DN 8) male thread fixing. As standard the sensor is delivered with a separate R1/2 (DN 15) male thread reducing bush. Accuracy See Appendix A: Table A
STX122
Part number
5123306000 5123308000
Model number
STX122-250 STX122-400
Description
Coil Temperature Sensor STX122-250 Coil Temperature Sensor STX122-400
System
TAC Vista TAC Xenta TAC Vista TAC Xenta
16
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
Temperature Sensors
Part number
5123102010 5123104010 5123106010 5123108010 5123110010 5123112010 5123114010 5123130010 5123132010 5123134010 5123136010 5123138010 5123140010 5123142010 5123170010 5123172000 5123174010 5123176010 5123180010 5123182000 5126010000
Model number
STP100-50 STP100-100 STP100-150 STP100-200 STP100-250 STP100-300 STP100-400 STP200-50 STP200-100 STP200-150 STP200-200 STP200-250 STP200-300 STP200-400 STP500-50 STP500-100 STP500-150 STP500-200 STP500-300 STP500-400 STP600D
Description
Pipe Temperature Sensor STP100-50 Pipe Temperature Sensor STP100-100 Pipe Temperature Sensor STP100-150 Pipe Temperature Sensor STP100-200 Pipe Temperature Sensor STP100-250 Pipe Temperature Sensor STP100-300 Pipe Temperature Sensor STP100-400 Pipe Temperature Sensor STP200-50 Pipe Temperature Sensor STP200-100 Pipe Temperature Sensor STP200-150 Pipe Temperature Sensor STP200-200 Pipe Temperature Sensor STP200-250 Pipe Temperature Sensor STP200-300 Pipe Temperature Sensor STP200-400 Pipe Temperature Sensor STP500-50 Pipe Temperature Sensor STP500-100 Pipe Temperature Sensor STP500-150 Pipe Temperature Sensor STP500-200 Pipe Temperature Sensor STP500-300 Pipe Temperature Sensor STP500-400 Pipe Temperature Sensor STP600D
System
TAC Vista, TAC Xenta TAC Vista, TAC Xenta TAC Vista, TAC Xenta TAC Vista, TAC Xenta TAC Vista, TAC Xenta TAC Vista, TAC Xenta TAC Vista, TAC Xenta TAC I/NET TAC I/NET TAC I/NET TAC I/NET TAC I/NET TAC I/NET TAC I/NET Andover Continuum Andover Continuum Andover Continuum Andover Continuum Andover Continuum Andover Continuum Drayton
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
17
Temperature Sensors
STP660
Part number
5126080000
Model Number
STP660
Description
Pipe Temperature Sensor STP660
System
Satchwell
The STP120, 220, 620 temperature sensors are intended for immersion mounting in pipe systems without requiring a pocket (well). This product is for use in fast time constant systems such as district heating applications. The STP housing is equipped with a 20mm cable fitting. A 20mm cable gland is supplied. Accuracy See Appendix A: Tables A, F
Part number
5123158010 5123160010 5123162010 5123230000 5123232000 5123234000 5126090000
Model Number
STP120 70 STP120 120 STP120 220 STP220-70 STP220-120 STP220-220 STP620
Description
Pipe Temperature Sensor STP120-70 Pipe Temperature Sensor STP120-120 Pipe Temperature Sensor STP120-220 Pipe Temperature Sensor STP220-70 Pipe Temperature Sensor STP220-120 Pipe Temperature Sensor STP220-220 Pipe Temperature Sensor STP620
System
TAC Vista TAC Xenta TAC Vista TAC Xenta TAC Vista TAC Xenta TAC I/NET TAC I/NET TAC I/NET Satchwell
18
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
Temperature Sensors
Specifications
Output Range Accuracy Supply 2-Wire, 4-20 mA 0/100, 0/160, -50/+50 C 0.4 % of range Min. 15Vdc, Max. 36Vdc
Part number
006920241 006920261 006920221 006920301 006920321 006920281 006920361 006920381 006920341 006920421 006920441 006920401
Model number
STP300-100 0/100 STP300-100 0/160 STP300-100 -50/50 STP300-200 0/100 STP300-200 0/160 STP300-200 -50/50 STP300-300 0/100 STP300-300 0/160 STP300-300 -50/50 STP300-400 0/100 STP300-400 0/160 STP300-400 -50/50
Description
Pipe Temperature Sensor STP300-100 0/100 Pipe Temperature Sensor STP300-100 0/160 Pipe Temperature Sensor STP300-100 -50/50 Pipe Temperature Sensor STP300-200 0/100 Pipe Temperature Sensor STP300-200 0/160 Pipe Temperature Sensor STP300-200 -50/50 Pipe Temperature Sensor STP300-300 0/100 Pipe Temperature Sensor STP300-300 0/160 Pipe Temperature Sensor STP300-300 -50/50 Pipe Temperature Sensor STP300-400 0/100 Pipe Temperature Sensor STP300-400 0/160 Pipe Temperature Sensor STP300-400 -50/50
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
19
Temperature Sensors
Pockets/Wells
The table below provides a list of pockets/wells suitable for use with most pipe sensors and transmitters. For Satchwell pipe sensors use DWA pockets. Note: pockets/wells must be ordered separately.
Pockets/Wells
Part number
9121040000 9121050000 9121041000 9121051000 9121042000 9121052000 9121043000 9121053000 9121044000 9121054000 9121045000 9121055000 9121046000 9121056000 9121058000 9121060000 9121062000 9121064000 9121066000
Description
Pocket STP 50mm Brass Pocket STP 50mm Stainless steel Pocket STP 100mm Brass Pocket STP 100mm Stainless steel Pocket STP 150mm Brass Pocket STP 150mm Stainless steel Pocket STP 200mm Brass Pocket STP 200mm Stainless steel Pocket STP 250mm Brass Pocket STP 250mm Stainless steel Pocket STP 300mm Brass Pocket STP 300mm Stainless steel Pocket STP 400mm Brass Pocket STP 400mm Stainless steel Satchwell Pocket DWA0001 Satchwell Pocket DWA0002 Satchwell Pocket DWA0003 Satchwell Pocket DWA0004 Satchwell Pocket DWA0005
20
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
Temperature Sensors
Part number
5123202010 5123206010 5123218010 5126070000 5126020000
Model number
STC100 STC200 STC500 STC600 STC600D
Description
Contact Temperature Sensor STC100 Contact Temperature Sensor STC200 Contact Temperature Sensor STC500 Contact Temperature Sensor STC600 Contact Temperature Sensor STC600D
System
TAC Vista TAC Xenta TAC I/NET Andover Continuum Satchwell Drayton
STC110, 510
The STC110 and 510 temperature sensors are designed for mounting on pipe systems of max. 100 mm. The temperature sensor is supplied with a connection cable of 2m or 4m. Accuracy See Appendix A: Tables A, C
Part number
5123210000 5123212000 5123236000 5123238000 5123220000
Model number
STC110-200 STC110-400 STC210-200 STC210-400 STC510-200
Description
Contact Temperature Sensor STC110-200 Contact Temperature Sensor STC110-400 Contact Temperature Sensor STC210-200 Contact Temperature Sensor STC210-400 Contact Temperature Sensor STC510-200
System
TAC Vista TAC Xenta TAC Vista TAC Xenta TAC I/NET TAC I/NET Andover Continuum
STC120
STC120 is a temperature sensor designed for mounting on a pipe system of heating coils 10-15 mm. The sensor is supplied with a connection cable of 0.25m. Accuracy See Appendix A: Table A
Part number
5123214000
Model number
STC120
Description
Contact Temperature Sensor STC120
System
TAC Vista TAC Xenta
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
21
Temperature Sensors
STC300
Specifications
Output Range Accuracy Supply 2-Wire, 4-20 mA 0/100, 0/160, -50/+50 C 0.3 C at 25 C Min. 15Vdc, Max. 36Vdc
Part number
006920041 006920061 006920021
Model number
STC300 0/100 STC300 0/160 STC300 -50/50
Description
Contact Temperature Sensor STC300 0/100 Contact Temperature Sensor STC300 0/160 Contact Temperature Sensor STC300 -50/50
System
All All All
22
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
Temperature Sensors
STO100, 200, 500, 600, 300 Outdoor Temperature Sensors & Transmitters
STO100, 200, 500, 600
These outdoor sensors are intended for outdoor wall mounting. Variants are available for TAC Vista, TAC I/NET, Andover Continuum and Satchwell systems. The body has a 20mm conduit entry and the product is supplied with a conduit gland.
Specifications
Range Accuracy -40 to +90 C See Appendix A: Table A, C, F
Part number
5141100010 5123246000 5141104010 5126060000 5126050000 5126000000
Model number
STO100 STO200 STO500 STO600 SSO600 STO600D
Description
Outdoor Temperature Sensor STO100 Outdoor Temperature Sensor STO200 Outdoor Temperature Sensor STO500 Outdoor Temperature Sensor STO600 Outdoor Solar Temperature Sensor SSO600 Outdoor Temperature Sensor STO600D
System
TAC Vista TAC Xenta TAC I/NET Andover Continuum Satchwell Satchwell Drayton
STO300
The STO300 transmitter is supplied as a complete unit, comprising a sensing element and an amplifier mounted in a housing which is resistant to ultraviolet light. The transmitter is intended for mounting on an outside wall, on the north side where possible. The transmitter is connected over a 2-wire cable, which serves both as power supply and signal transmission. The reading of the measured signal is made over an external load resistance.
Specifications
Output Range Accuracy Supply 4-20 mA -50/+50 C 0.4 % of range Min. 15Vdc, Max. 36Vdc
Part number
006920501
Model number
STO300 -50/50
Description
Outdoor Temperature Sensor STO300
System
All
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
23
Temperature Sensors
STT900
Part number
5127090000 5127080000 5127070000 5127060000 5127050000 5127040000 5127030000 5127020000 5127010000 5127000000
Model number
STT910 STT914 STT912 STT911 STT913 STT900 STT904 STT902 STT901 STT903
Control characteristics
Manual Manual Manual Manual Manual Automatically Automatically Automatically Automatically Automatically
Permissible medium
Air Air Air Air / Water Air Air Air Air Air / Water Air
24
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
25
AC Room Controllers
Instat 7
This electronic Air Conditioning controller has 2 heat and 2 cool outputs with fan on/off. Part number INSTAT 7 52745 Description INSTAT 7 - 52745
KLRE
This selection of Air Conditioning controllers offer a variety of features most commonly required for the control of heating and cooling in residential and office applications. Part number Description
KLR-E 5177801 KLR-E 5177805 KLR-E 5177810 KLR-E 52555 KLR-E 52556 KLR-E 52723 KLR-E 52724 KLR-E 7009 KLR-E 7010 KLR-E 7011 KLR-E 7012 KLR-E 7026 KLR-E 7038 KLR-E 7611 KLR-E 7204 KLR-E 7203 KLR-E 7202 KLR-E 5273 KLR-E 525 52 HP KLR-E 525 52 4P FRE 52531
AC Controller KLR-E 5177801 AC Controller KLR-E 5177805 AC Controller KLR-E 5177810 AC Controller KLR-E 52555 AC Controller KLR-E 52556 AC Controller KLR-E 52723 AC Controller KLR-E 52724 AC Controller KLR-E 7009 AC Controller KLR-E 7010 AC Controller KLR-E 7011 AC Controller KLR-E 7012 AC Controller KLR-E 7026 AC Controller KLR-E 7038 Room Thermostat - KLR-E 7611 AC controller - KLR-E 7204 AC controller - KLR-E 7203 AC controller - KLR-E 7202 Room Thermostat -KLR-E 5273 AC controller - KLR-E 525 52 HP AC controller - KLR-E 525 52 4P Electric Floor Htg Controller - FRE 52531
RTR
These electronic room controllers offer a basic form of on/off heat or heat/cool control within a 75 x 75 mm enclosure. Part number Description
Room Controller RTR-E 3502 Room Controller RTR-E 3520 Room Controller RTR-E 6124 Room Controller RTR-E 6721
Accessories
Part number Description
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
27
Humidity Transmitters
Specifications
Output Range Accuracy Supply Selectable 4-20 mA, 0-10 V 0-95% RH 2% 24 Vac / 15-36 Vdc Power
Part number
006902340
Model number
SHR100
Description
Living Space Humidity Sensor SHR100 Living Space Humidity + Temperature SHR100-T
System
All (%RH only) TAC I/NET TAC Vista TAC Xenta Andover Continuum TAC Vista TAC Xenta
006902350
SHR100-T
006902390
SHR100-T5
Living Space Humidity + Temperature SHR100-T5 Living Space Humidity + Temperature SHR100-T6
006902420
SHR100-T6
Satchwell
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
29
Humidity Transmitters
SHD100
Specifications
Output Range Accuracy Supply Selectable 4-20 mA, 0-10 V 0-95% RH 2% 24 Vac / 15-36 Vdc Power
Part number
006902321
Model number
SHD100
Description
Duct Humidity Sensor SHD100 Duct Humidity + Temperature SHD100-T
System
All (%RH only) TAC I/NET TAC Vista TAC Xenta Andover Continuum TAC Vista TAC Xenta
006902331
SHD100-T
006902381
SHD101-T5
006902411
SHD101-T6
Satchwell
30
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
Humidity Transmitters
Specifications
Output Range Accuracy Supply Selectable 4-20 mA, 0-10 V 0-95% RH 2% 24 Vac / 15-36 Vdc Power
Part number
006902361
Model number
SHO100
Description
Outdoor Humidity Sensor SHO100 Outdoor Humidity + Temperature SHO100-T
System
All (%RH only) TAC I/NET TAC Vista TAC Xenta Andover Continuum TAC Vista TAC Xenta
006902371
SHO100-T
006902401
SHO101-T5
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
31
Condensation Transmitter
SCP110/SCC110
Specifications
Output Relay contact (change-over), 24V/1A, potential-free, contact material Ag/Ni 90/10 Switching threshold adjustable 90 to 96%rH. Mid-position equals 93% rH 24Vac+/-10% / 18-32Vdc
Range Supply
Part number
006902500 006902510
Model number
SCP110 SCC110
Description
Pipe Condensation Transmitter SCP110 Contact Condensation Transmitter SCC110
32
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
33
34
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
Pressure Transmitters
Specifications
Output Ranges Accuracy Linear output 0-100Pa 0-100Pa Accuracy at ambient temperature of 25C/UG-24V 0.75%FS 1.5% 4%FS 0.4%FS 0-10 V 0-100 Pa, 0-300 Pa, 0-500 Pa, 0-1000 Pa, 0-1200 Pa, 0-2500 Pa, 0-5000 Pa
Part number
004700320
Model number
SPD310-100/300/500/1000Pa
Description
Differential Air Pressure Transmitters SPD310-100/300/500/1000Pa Differential Air Pressure Transmitters SPD310-1000/1200/2500/5000Pa Differential Air Pressure Transmitters SPD360-300/500/1000/2500Pa
004700340
SPD310-1000/1200/2500/5000Pa
004700360
SPD360-300/500/1000/2500Pa
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
35
Pressure Transmitters
Specifications
Output Ranges 0-10 V 0-100 kPa, 0-250 kPa, 0-600 kPa, 0-1000 kPa, 0-1600 kPa, 0-2500 kPa, 0-4000 kPa ranges
Accuracy
Total of linearity, hysteresis and repeatability Zero point residual voltage Supply
Description
Wet Media Pressure Transmitter SPP110-100kPa Wet Media Pressure Transmitter SPP110-250kPa Wet Media Pressure Transmitter SPP110-600kPa Wet Media Pressure Transmitter SPP110-1000kPa Wet Media Pressure Transmitter SPP110-1600kPa Wet Media Pressure Transmitter SPP110-2500kPa Wet Media Pressure Transmitter SPP110-4000kPa
004702080
SPP110-1000kPa
004702100
SPP110-1600kPa
004702120
SPP110-2500kPa
004702140
SPP110-4000kPa
36
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
Pressure Transmitters
Specifications
Output Ranges 3 wire 0 -10V 0-0.5, 0-1.0, 0-1.6, 0-2.5, 0-4.0, 0-6.0, 0-10 and 0-16.0. All figures shown are in bar. Max. 1% (varies depending on model) 1.25% Max. Liquids and neutral gases 1833VDC or 24VAC 15% Screws and female connector providing IP65 when installed are all included
Accuracy Total of linearity, hysteresis and repeatability Medium Supply Mounting bracket
Description
Differential Water Pressure Transmitter 0.0.5bar Differential Water Pressure Transmitter 0.1bar Differential Water Pressure Transmitter 0.1.6bar Differential Water Pressure Transmitter 0.2.5bar Differential Water Pressure Transmitter 0.4bar Differential Water Pressure Transmitter 0.6bar Differential Water Pressure Transmitter 0.10bar Differential Water Pressure Transmitter 0.16bar
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
37
Pressure Transmitters
Specifications
Nominal voltage Nominal current Nominal current Current rating Contact Material AgCdO SPDT Dry Contacts Service Life Mechanically 106 Switching Cycles Protection Standard IP65 Electrical Connection Screw Terminals 250Vac 1A resistive loading 0.5A inductive loading 0.1A resistive, 1A inductive
Description
Differential pressure switch 6 to 20 mbar Differential pressure switch 15 to 60 mbar Differential pressure switch 40 to 200 mbar Differential pressure switch 150 to 1000 mbar Differential pressure switch 1 to 3 bar Differential pressure switch 2.5 to 5.5 bar
Note that this Huba differential pressure switch Type 630, is a class three product and technical support will be provided by Huba. Click link www.hubacontrol.com
38
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
Pressure Transmitters
Specifications
Nominal voltage Nominal current Nominal current Current rating SPDT Dry Contacts Service Life Mechanically 106 Switching Cycles Electrical Connection Screw Terminal Cable Gland PG11 250Vac 1A resistive loading 0.5A inductive loading 0.1A resistive, 1A inductive
Description
Overpressure switch 120 to 2200 mbar Overpressure switch 1000 to 6000 mbar
Note that this is a Huba relative pressure switch Type 625, class three product and technical support will be provided by Huba. Click link www.hubacontrol.com
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
39
Pressure Transmitters
Specifications
SPD910 Range Maximum voltage rating Contacts Current rating SPD910 Range Maximum voltage rating Contacts Current rating 40-600 Pa 250Vac Silver 0.1A resistive, 2A inductive 20-200 Pa 250Vac Silver 0.1A resistive, 1A inductive
Description
Switch Pres Air SPD910-2000Pa Switch Pres Air SPD910-1000Pa Switch Pres Air SPD910-500Pa Switch Pres Air SPD910-300Pa
40
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
Pressure Transmitters
Pressure Meters
This device uses a SPD900-600 pressure switch combined with an analogue meter to display the instantaneous pressure value.
Part number
6552000000
Model number
109.002.001
Description
DPG600/PS600 Pressure Gauge w.Pr.switch
Manufacturer
Hk Instruments
The Inclined Tube Manometer is a traditional pressure meter which measures and indicates, small over pressure, under pressure and differential pressure of air and nonaggressive gasses in pressure ranges from +/- 50 Pa up to 0-1 500 Pa.
Part number
6552001000
Model number
110.001.001
Description
Inclined Tube Manometer
Manufacturer
Hk Instruments
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
41
42
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
Specifications
Input voltage Analogue output Current draw 24VAC, 20 to 36VDC 4 to 20mA, 0 to 5V or 0 to 10V 50 to 170mA (dependent on input voltage)
Available products
Part number
5152400000 5152402000 5152420000 5152422000 5152404000 5152406000 5152424000 5152426000 5152408000 5152410000 5152428000 5152430000 5152412000 5152414000 5152432000 5152434000 5152416000 5152418000 5152436000 5152438000 5152339010 5152339000
Model number
SCR110 SCR110-H SCR110B SCR110B-H SCR210 SCR210-H SCR210B SCR210B-H SCR510 SCR510-H SCR510B SCR510B-H SCR610 SCR610-H SCR610B SCR610B-H SCR810 SCR810-H SCR810B SCR810B-H HS2NX HS2XX
TEMP
x x x x
2% RH
x x x x x x x x x x
System
TAC Vista 1.8K TAC Vista 1.8K TAC Vista 1.8K TAC Vista 1.8K TAC i/NET 10K T2 TAC i/NET 10K T2 TAC i/NET 10K T2 TAC i/NET 10K T3 Andover Continuum 10K T3 Andover Continuum 10K T3 Andover Continuum 10K T3 Andover Continuum 10K T3 Satchwell 10K T3 Resistor/Shunt Satchwell 10K T3 Resistor/Shunt Satchwell 10K T3 Resistor/Shunt Satchwell 10K T3 Resistor/Shunt I/A 10K T3 w/Shunt I/A 10K T3 w/Shunt I/A 10K T3 w/Shunt I/A 10K T3 w/Shunt
x x
x x x x
x x
x x x x
x x
x x x x
x x
x x x x
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
43
Specifications
Input voltage Analogue output Current draw
For full details refer to the data sheet.
Available products
Part number Model number Duct mounted CO2 sensor with Temp 2%RH LCD System
5152300000 5152302000 5152304000 5152306000 5152308000 5152310000 5152312000 5152314000 5152316000 5152318000 5152329000 5152322000 5152324000 5152326000 5152328000 5152330000 5152332000 5152334000 5152336000 5152338000 5152339010 5152339000
44
SCD110 SCD110-D SCD110 H SCD110-D-H SCD210 SCD210-D SCD210 H SCD210-D-H SCD510 SCD510-D SCD510 H SCD510-D-H SCD610 SCD610-D SCD610 H SCD610-D-H SCD810 SCD810-D SCD810 H SCD810-D-H HS2NX HS2XX
X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
TAC Vista 1.8K TAC Vista 1.8K TAC Vista 1.8K TAC Vista 1.8K TAC I/NET 10k T2 TAC I/NET 10k T2 TAC I/NET 10k T2 TAC I/NET 10k T2 Andover Continuum 10K T3 Andover Continuum 10K T3 Andover Continuum 10K T3 Andover Continuum 10K T3 Satchwell 10K T3 Resistor/Shunt Satchwell 10K T3 Resistor/Shunt Satchwell 10K T3 Resistor/Shunt Satchwell 10K T3 Resistor/Shunt I/A 10K T3 w/Shunt I/A 10K T3 w/Shunt I/A 10K T3 w/Shunt I/A 10K T3 w/Shunt
Part number
6559016000
Model number
Description
Manufacturer
SenseAir
Sensor Living Sensor Living Space Space CO2 CO2 aSENSE-Display aSENSE-Display
Part number
6553063000
Model number
07-08-01-CO-D
Description
aSENSE m III CO&CO2 Combi
Manufacturer
SenseAir
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
45
This device measures both carbon monoxide and carbon dioxide and therefore is ideal for measuring air quality for health purposes in indoor carparks and traffic tunnels. Energy efficiency can be achieved by using the measurement(s) to vary the fan speed of the fresh air supply equipment.
Part number
6553064000
Model number
040-8-0-0066
Description
aSENSE m III-K CO&CO2 Combi
Manufacturer
SenseAir
46
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
47
48
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
Smoke
These smoke detectors from Calectro offer both optical and ionisation types. Fan assisted versions also available along with a range of options such as covers, various lengths of venturi pipes, and control units.
Part number
6553034000 6553036000 6553028000 6553038000
Model number
UG-3-A4O UG-3-A5O UG-3-O UG-3-O-F
Description
Duct Smoke Detector UG-3-A4O Duct Smoke Detector UG-3-A5O Duct Smoke Detector UG-3-O Duct Smoke Detector UG-3-O-F
Model number
UG-Cover UG-Mounting bracket VR-1.5M VR-2.8M
Description
Protection cover for Uniguard UG-Mounting Bracket Venturi Pipe VR-1.5M Venturi Pipe VR-2.8M
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
49
Smoke
These smoke detectors from Calectro are advanced industrial grade products using a dual-chamber principle that makes for a fast reaction time.
Part number
6553014000 6553047000 6553041000
Model number
EVC-PY-DA NS-AOS EVC-PY-DA
Description
Smoke Detector EVC-PY-DA Smoke Detector NS-AOS Smoke Detector EVC-PY-DA
These controllers are designed for DIN rail mounting. Relays operate on an active smoke alarm that can be used to stop ventilation fans and close fire dampers. Front LEDs provide local status including a service indication showing a need for sensor replacement.
Part number
6553006000 6553007000 6553008000
Model number
ABAV-S3 24v ABAV-S3 230v STB-4SE-24VR
Description
Control Unit ABAV-S3 24v Control Unit ABAV-S3 230v Relay Socket
50
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
51
52
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
Light Transmitters
0-400 lux (e.g. for controlling outdoor lighting) 0-20k lux (for controlling sunshade systems).
The transmitter is delivered as a complete unit, comprising the sensing element, and an amplifier mounted in a housing. The transmitter is intended for wall mounting indoors. The sensitivity peak is for light at an angle of incidence of 0 to the perpendicular. The sensor has the same spectrum sensitivity peak as the human eye. The SLR320 converts a lux measurement into a current signal 4-20mA or an electric signal 0-10 V. Selectable by a link located on the PCB.
Specifications
SLR320 current mode Output Range Accuracy Supply SLR320 voltage mode Output Range Accuracy Supply 0-10Vdc 0-400 lux, 0-20k lux selectable 5% 24Vac, 15-36 Vdc 2-Wire, 4-20 mA 0-400 lux, 0-20k lux selectable 5% Min. 15Vdc, Max. 36Vdc
Part number
006920630
Model number
SLR320
Description
Living Space Light Sensor SLR320
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
53
Light Transmitters
The SLO320 electronic light transmitter converts a lux measurement into an electric current (4 to 20mA) or voltage (0 to 10V) signal. They have two sensitivity ranges to suit different light levels:
n n
SLO320
0-400 (e.g. for controlling outdoor lighting) 0-20 (for controlling sunshade systems).
The transmitter is delivered as a complete unit, comprising the sensing element and an amplifier mounted in a housing. The transmitter is intended for wall mounting. The sensitivity peak is for light at an angle of incidence of 0 to the perpendicular. The sensor has the same spectrum sensitivity peak as the human eye. The SLO320 is an electronic light transmitter that converts a lux measurement into a current signal 4-20mA or an electric signal 0-10 V selectable by a link located on the PCB.
Specifications
SLO320 current mode Output Range Accuracy Supply SLO320 voltage mode Output Range Accuracy Supply 0-10Vdc 0-400 lux, 0-20k lux selectable 5% Min. 15Vdc, Max. 36Vdc 2-Wire, 4-20 mA 0-400 lux, 0-20k lux selectable 5% Min. 15Vdc, Max. 36Vdc
Part number
006920640
Model number
SLO320
Description
Outdoor Light Sensor SLO320
54
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
55
Table E
For all Andover Continuum Averaging Sensors (500 Series), e.g. STD500-150 At temperature -25 C/-13 F 0 C/32 F 25 C/77 F 50 C/122 F 70 C/158 F 100 C/212 F Accuracy 0.5 C/0.9 F 0.2 C/0.4 F 0.2 C/0.4 F 0.2 C/0.4 F 0.2 C/0.4 F 0.5 C/0.9 F
Table B
For all TAC I/NET (200 Series Sensors), e.g. STD200 At temperature -25 C/-13 F 0 C/32 F 25 C/77 F 50 C/122 F 70 C/158 F 100 C/212 F Accuracy 0.5 C/0.9 F 0.2 C/0.4 F 0.2 C/0.4 F 0.2 C/0.4 F 0.2 C/0.4 F 0.5 C/0.9 F
Table F
For all Satchwell Sensors (600 Series), e.g. STR600 At temperature -25 C/-13 F 0 C/32 F 25 C/77 F 50 C/122 F 75 C/167 F 100 C/212 F Accuracy 0.6 C/1.0 F . 0.3 C/0.5 F 0.2 C/0.4 F 0.2 C/0.4 F 0.3 C/0.5 F 0.3 C/0.5 F
Table C
For all Andover Continuum (500 Series Sensors), e.g. STD500 At temperature -25 C/-13 F 0 C/32 F 25 C/77 F 50 C/122 F 70 C/158 F 100 C/212 F Accuracy 0.5 C/0.9 F 0.2 C/0.4 F 0.2 C/0.4 F 0.2 C/0.4 F 0.2 C/0.4 F 0.5 C/0.9 F
Table G
For STR800 Living Space Sensors At temperature 0C/32F 10C/50F 25C/75F 35C/95F 50C/122F Accuracy 0.3C/0.5F 0.3C/0.5F 0.3C/0.5F 0.3C/0.5F 0.3C/0.5F
Table D
For all TAC Vista Averaging Sensors (100 Series), e.g.STD 190 At temperature -25 C/-13 F 0 C/32 F 25 C/77 F 50 C/122 F 75 C/167 F 100 C/212 F Accuracy 0.7 C/1.3 F 0.5 C/0.9 F 0.3 C/0.5 F 0.6 C/1.1 F 0.9 C/1.6 F 1.3 C/2.3 F
56
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
SX Y
123
1234
Primary Reference S = Sensor X = T (Temperature) H (Humidity) P (Pressure) Y = R (Living Space) P (Pipe, water) D (Duct) C (Contact) X (Immersion probes)
Secondary Reference 100 = Vista Products 200 = I/NET Products 300 = 4-20 mA Transmitters 400 = 0-10 V Transmitters 500 = Continuum Products 600 = Satchwell Products 800 = IA Products
Optional Reference Where applicable, this will denote probe length, pressure range etc
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
57
Schneider Electric
Jgershillgatan 213 75 Malm, Sweden Telephone: +46 (40) 38 68 50 www.schneider-electric.com As standards, specifications, and designs change from time to time, please ask for confirmation of the information given in this publication. Design: Schneider Electric Photos: Schneider Electric
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC 58
February 2012
CAT-SENSORS-EU.BU.N.EN.2.2012.0.01.CC
2012 Schneider Electric. All Rights Reserved. Schneider Electric and Make the most of your energy are trademarks owned by Schneider Electric Industries SAS or its affiliated companies.