Professional Documents
Culture Documents
1020PHTW
1020PHTW
1 Grade:- SIVALENE 1020 PHTW Product description: - SIVALENE 1020 PHTW is 20% Talc filled Polypropylene homo polymer white compound. This grade is available in Natural, Black and other custom coloured forms. Application Area: - This grade is applicable for Injection molding (automotive & industrial sector.) Properties Physical Specific Gravity Moisture Bulk Density Mould Shrinkage Tensile Strength Elongation at break Flexural Modulus Flexural Yield Strength Izod Impact (notched) HDT at 0.46 MPa Melt Flow Index Test Method ASTM D 792
ASTM D 6980
Specs. Value 1.05 <0.20 1000 0.0014 275 10.0 28000 460 3.0 121 8.00
ASTM D1895B ASTM D 955 ASTM D 638 ASTM D 638 ASTM D 790 ASTM D 790 ASTM D 256 ASTM D 648 ASTM D 1238
Mechanical
Thermal Rheological
All the above measurements are made on Injection Moulded sample conditioned at room temperature. The data contained above represent typical values of individual properties. General processing for Injection molding:-
It is highly recommended that this PP-SIVALENE should be pre dried in hopper dryer or dehumidifier at 80 degrees C to withdraw possible moisture absorbed by hygroscopic material. Packing: Standard packing of 25 KG Woven Bags
H.O: A-2, Badshah Bagh Colony, Maldahiya, Varanasi-221002 (UP) INDIA I Tel # +91-542-2391915/3253667 Fax # +91-542-2391913 Mob # +91-9889008801 / 9889008802 I E-Mail: shivam@jjppl.co.in / shivam.bansal@gmail.com Visit us at: www.jjplastalloy.com or www.jjppl.com B.O.: # Gurgaon # Jaipur # Haridwar