Professional Documents
Culture Documents
Pinned Column With Intermediate Lateral Restraints Sheet 2 of 3
Pinned Column With Intermediate Lateral Restraints Sheet 2 of 3
SO1
I Sheet
2 of
3ev
iteel Building yesign: yesign Data
Geometric properties: A = 113 cmz = 11300mmz;i, = 11.2 cm = 112mm; i, = 6.55 cm = 65.5mm; tt = 17.3mm; ct/t+=6.38; c,Jt,+= 19.4 Material properties: Yield strength J, = 265 N / m m z since 16 > tt 2 4 0 m m Check cross-section classification under pure compression: Need only check that section is not Class 4 (slender) For outstandjange cr/tiE 5 14
235
= 0.94
Actual cr/tie = 7.04/0.94 = 6.77; within limit Actual c,/t,e = 20.4/0.94 = 20.7; within limit :.Section is not Class 4 Cross-section compression resistance: N , Rii
= -= 11300x265x10-~7 = 2 9 9 5 k N > 1 2 5 0 k N = N ,
Yuo
1.0
OK
9 s EN '993-1-1 71 6.2.4
Effective lengths: L,,! = 1.0 L = 1.0 x 12000 = 12000mm for buckling about the y-y axis L,r,z= 1.0 L = 1.0 x 4000 = 4000mm for buckling about the z-z axis. Non-dimensional slendernesses:
Buckling curves. For major axis buckling, use buckling curve '6' For minor axis buckling, use buckling curve 'c'. Buckling reduction ,factors
x: