Professional Documents
Culture Documents
Technical Data Sheet: Bestnyl
Technical Data Sheet: Bestnyl
Technical Data Sheet: Bestnyl
BESTNYL
SI00VI01BE
Polyamide 6 natural extrution or high viscosity, appropriate for pieces extruded or injected, generally used in plastic tubes, bars and other technical pieces.
Standard
Unit Dry
Values Conditioned
Generals
Density Melt Flow Index Humidity Pelets Rockwell Mold Shrinkage ISO 1183 ISO 1133 ISO 1110 Scale R gr /cm3 gr /10 min. % Points % 1,13 3 0,2 119 ~1,1 Dry ISO 527 ISO 527 ISO 527 23 C ISO 179 -20 C ISO 179 23 C ISO 179 -20 C ISO 179 N /mm2 % N /mm2 Kj / m2 Kj / m2 Kj / m2 Kj / m2 80 >50 2800 NB 6 Dry IEC 93 IEC 243 IEC 112 Ohm Kv / mm Kv / mm 10^15 Dry C C C 185 70 >200 Dry UL-94 IEC 695 FMV 302 Triesa Test ISO 62 C mm / min. % % HB <100 ~1,3 YES Conditioned Conditioned Conditioned Conditioned -
Mechanical
Tensile Strenght Elogantion at break Tensile Modulus Charpy Impact Charpy notched Impact
Electrical
Surface Resistivity Dielectric strenght Tracking Iindex ( C.T.I.)
Thermal
Deflection Temp.Under Load 0,4 N ISO 75 /A (H.D.T.) 1,8 N ISO 75 /A VICAT Temperature ISO 306
Others
UL-94 Flammability Glow Wire Flammability speed Ashes Water absorption (24h) Lubrificated
Processing
Drying Material 2h - 4h 90 C Mold. Temperature 40 C - 60 C Processing Temperature 230 C - 255 C
-This values provided in this data sheet corresponds to our Knowledge. All products must be subjected to in company test by the user before application -These data may not valid such material used in combination with any other materials or additives or in any process - UL mesurements are doing in our lab according this norm
*Bestnyl is a trademark of Triesa Poliamidas S.A. 1990 - 2012 Triesa Poliamidas S.A.