Removing The Battery: - The Camera, Battery or Memory Card May Be Hot Immediately After Using The

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Inserting the Battery

Removing the Battery


Before opening the battery-chamber/memory card slot cover, turn the camera off (A23) and confirm that the power-on lamp and the monitor are off. To eject the battery, open the battery-chamber/ memory card slot cover and slide the orange battery latch in the direction indicated by the arrow (1), then remove the battery while being careful not to remove the battery at an angle (2). The camera, battery or memory card may be hot immediately after using the camera. Observe caution when removing the battery or memory card.

First Steps

Notes on Battery

Be sure to read and follow the warnings of For Your Safety (Aii) thoroughly before using the battery. Be sure to read and follow the warnings for The Battery (A210) thoroughly before using the battery. If the battery will not be used for an extended period, recharge it at least once every six months and run it flat before returning it to storage.

19

You might also like