Professional Documents
Culture Documents
Assignment 2: Technical Drawing
Assignment 2: Technical Drawing
Technical Drawing
Due Thursday, April 14 - 12:30 PM
objective
Develop spacial analysis skills through basic orthographic and isometric drafting.
requirements
Complete the following exercises. If you have trouble or get stuck, ask me or a fellow classmate for assistance. Please make sure you understand how to do the drawings, as this will show up on a quiz! Sections: A. Draw each of these four gures in orthographic views (top, front, side). B. Make an isometric drawing of this gure, based on the given orthographics. C. Draw each of these more challenging gures in orthographic views. D. Fill in the missing orthographic view in these two drawings.
grading criteria
I will look this packet for the following: - Completion of all drawings - Accuracy of the representation - Neatness, Craftsmanship, & Legibility! I will check over your drawings when you nish today to check for accuracy and let you know if anything needs to be xed.
A A
1.
2.
3.
4.
1.
2.
3.
Using isometric views, draw orthographic views. Overall Dimensions of both gures: L = 6 cm W = 4 cm H = 4 cm
TOP
TOP
FRONT
SIDE
TOP
D
SIDE
FRONT
TOP
FRONT
SIDE