Professional Documents
Culture Documents
Single Generator Alarm Configuration
Single Generator Alarm Configuration
I. The procedure for connect the Generator alarm for outdoor BTS is as follows:
1- Connect Cable from DMLU (SW IN/OUT port) to the DDF using a DB44
monitoring signal cable
2- Connect the sensor of alarm to DDF according to Table below ALARM NAME Generator Low Fuel Tank Generator1 running Generator1 failure AC mains failure STARTPT X1.19 X1.3 X1.18 X1.2 X1.21 X1.5 X1.20 X1.4 COLOR White Green White Orange White Grey White Brown
2013-6-19
1 , 2
NotesAlarm Shield Flag has 8 bits, the low 4 bits means the 1-4 alarms, the high 4 bits means 58 alarms
2013-6-19
2 , 2