The document provides formulas for calculating drilling parameters such as RPM, cutting speed, feed speed, material removal rate, power requirement, torque, feed force, and machining time. It defines terms used in the formulas such as diameter, depth of hole, feed per revolution, distance from drill point to workpiece, cutting speed, specific cutting force, machine efficiency, and cross-sectional area of the hole. The formulas allow calculation of critical values needed for efficient and effective drilling operations.
The document provides formulas for calculating drilling parameters such as RPM, cutting speed, feed speed, material removal rate, power requirement, torque, feed force, and machining time. It defines terms used in the formulas such as diameter, depth of hole, feed per revolution, distance from drill point to workpiece, cutting speed, specific cutting force, machine efficiency, and cross-sectional area of the hole. The formulas allow calculation of critical values needed for efficient and effective drilling operations.
The document provides formulas for calculating drilling parameters such as RPM, cutting speed, feed speed, material removal rate, power requirement, torque, feed force, and machining time. It defines terms used in the formulas such as diameter, depth of hole, feed per revolution, distance from drill point to workpiece, cutting speed, specific cutting force, machine efficiency, and cross-sectional area of the hole. The formulas allow calculation of critical values needed for efficient and effective drilling operations.
The document provides formulas for calculating drilling parameters such as RPM, cutting speed, feed speed, material removal rate, power requirement, torque, feed force, and machining time. It defines terms used in the formulas such as diameter, depth of hole, feed per revolution, distance from drill point to workpiece, cutting speed, specific cutting force, machine efficiency, and cross-sectional area of the hole. The formulas allow calculation of critical values needed for efficient and effective drilling operations.
RPM n = vc 12 D (rev/min) f = Feed per revolution h = Distance from drill point to workpiece before feeding Cutting speed vc = nD 12 (ft/min) kc = Specific cutting force L = Depth of hole = Machine efficiency Feed speed vf = f n (inch/min) (inch/rev) (inch) (Lbf/inch2) (inch) (%)