Professional Documents
Culture Documents
Thermguard 35: Industrial Coolant and Heat Transfer Fluid
Thermguard 35: Industrial Coolant and Heat Transfer Fluid
Product Information
ThermGuard 35 is a premium engine coolant used throughout the oil and gas industry. It is an inhibited ethylene glycol used as a heavy-duty industrial coolant and heat transfer fluid. The inhibitor system is designed to protect brass, copper, solder, steel, cast iron, aluminum, and other natural metals commonly found in industrial cooling and heating systems. ThermGuard 35 is a 35% solution in de-ionized water with freeze protection to -15C. ThermGuard 35 can be reinhibited as needed with ThermGuard Supplemental Coolant Additives to ensure long service life.
Application
Coastal Chemical Co., LLC provides technical support for ThermGuard 35 via coolant sampling and laboratory testing. Results are reviewed and recommendations are made to ensure proper coolant quality. ThermGuard 35 also satisfies all specifications as required by Waukesha, Caterpillar, Superior, and other engine manufacturers.
Handling Precautions
ThermGuard 35 is an industrial chemical and should be handled as such. Users should thoroughly review the Material Safety Data Sheets (MSDS) for this product prior to use.
DENSITY
1100
0.90
SPECIFIC HEAT
Density, (kg/cu m)
1050
0.85
1000
0.80
50 100 Temperature, C
150
50 100 Temperature, C
150
THERMAL CONDUCTIVITY
0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0 50 100 Temperature, C 150
60 50
VISCOSITY
Viscosity (cP)
40 30 20 10
50 100 Temperature, C
150
The data presented in this bulletin are typical only and not specifications. The information and suggested uses are based on evaluations believed reliable. No guarantee or warranties are expressed or implied, however, including the implied warranty of merchantability and fitness for particular purpose. Coastal Chemical Co., LLC disclaims any liability in the use of these data, including possible infringement of patent.