Professional Documents
Culture Documents
pt2388 (v1
pt2388 (v1
Princeton Technology Corp. Tel: (852) 2345 0540 Fax: (852) 2345 9948 Web Site: www.angus.com.hk
DESCRIPTION
PT2388 is a 2-channel digital preset equalizer utilizing CMOS Technology. It provides 5 different
sound selections, namely: Flat/Normal, Rock, Pops, Classic and Jazz. A Bass Booster may be added to
any of 5 sound selections, thereby creating more audio versatility. PT2388 provides two types of key
selection mode, namely: the Direct and the Cyclic. Pin assignment and application circuit are optimized
for cost saving advantages and easy PCB layout.
FEATURES
! CMOS Technology
! Low Total Harmonic Distortion and High S/N Ratio: THD + N < 0.02%, S/N > 95 dB
! LED Display Output Mode
! Least External Components
! 5 Sound Selections Provided: Flat/Normal, Classic, Rock, Pops, and Jazz
! Bass Booster Function
! 2-Channel Output
! Wide Operating Voltage Range: 5 ~9 V
! Direct or Cyclic Key Selection is Provided
! Available in DIP or SO Package
APPLICATIONS
!Walkman
!Car Audio
!Fader
!Multimedia Audio Components
!MPEG Card
BLOCK DIAGRAM
OUTL
INL Buffer Bass Treble
TL
BL1
BL2 Gain Selector
BR1
BR2
VCC
Mute MUTE
Control Unit
PIN CONFIGURATION
INL 1 24 INR
BL1 2 23 BR1
BL2 3 22 BR2
TL 4 21 TR
OUTL 5 20 OUTR
VCC 6 19 JAZZ
BIAS 7 18 CLASSIC
GND 8 17 POPS
SEL 9 16 ROCK
MUTE 10 15 FLAT
CYC 11 14 BLED
BB 12 13 NC
PT2388
PT2388 v 1.3 Page 2 Written October 1999
ANGUS ELECTRONICS COMPANY LIMITED
Princeton Technology Corp. Tel: (852) 2345 0540 Fax: (852) 2345 9948 Web Site: www.angus.com.hk
PIN DESCRIPTION
Pin
Pin N ame I/O Description
N o.
IN L I Left C hannel Input 1
Left Bass C ontrol Pin 1
BL1 - A capacitor may be connected between this pin and 2
BL2.
Left Bass C ontrol Pin 2
BL2 - 3
A capacitor may be connected between this pin and BL1
Left Treble C ontrol Pin
TL - A capacitor may be connected between this pin and 4
O UTL.
O UTL O Left C hannel O utput Pin 5
VC C - Positive Supply Voltage 6
A capacitor may be connected between this pin and
BIAS - 7
GN D.
GN D - Ground 8
SEL I Select C ontrol Pin 9
Mute Pin
The Mute Pin can eliminate the noise when mode
MUTE - 10
changing occurs. A capacitor is connected between this
pin and GN D.
C YC I C yclic Select Pin 11
BB I Bass Booster C ontrol Input Pin 12
NC - N o C onnection 13
BLED O Bass Booster Display Pin 14
FLAT I/O Flat Mode Display & C ontrol Input Pin 15
RO C K I/O Rock Mode Display & C ontrol Input Pin 16
PO PS I/O Pops Mode Display & C ontrol Input Pin 17
C LASSIC I/O C lassic Mode Display & C ontrol Input Pin 18
JAZZ I/O Jazz Mode Display & C ontrol Input Pin 19
O UTR O Right C hannel O utput Pin 20
Right Treble C ontrol Pin
TR - 21
A capacitor is connected between this pin and O UTR.
Right Bass C ontrol Pin 2
BR2 - 22
A capacitor is connected between this pin and BR1
Right Bass C ontrol Pin 1
BR1 - 23
A capacitor is connected between this pin and BR2
IN R I Right C hannel Input Pin. 24
FUNCTIONAL DESCRIPTION
PT2388 is a 5-Mode Preset Equalizer IC with a Bass Booster Function. It has 2 types of key selection
mode, namely: Direct and Cyclic. The Direct or Cyclic Key Selection Mode are determined by the
SEL Pin. Please refer to the table below:
K ey Selection
SEL Pin Description
Mode
Note: 1. The Bass Booster can be controlled in the same manner under the Direct or the Cyclic Key
Selection Mode. To turn the Bass Booster On or Off, press the BB Key.
* = Under the Cyclic Selection Mode, press the CYC key, to go to the next sound selection.
The BB Key controls the Bass Booster. When the power is turned ON, the Bass Booster is OFF.
Rock Mode
FREQUENCY RESPONSE
The following diagrams illustrate the various frequency response under the various sound selection
(Flat, Rock, Pops, Classic, Jazz and Bass Booster).
Different sound selections exhibit different frequency gains at different frequency levels. Please refer to
the table below:
Typ.
Sound Selection Unit
f=80 Hz f=1 K Hz f=10 K Hz
Flat 1. 7 - 0.8 - 1.3
Rock 10 1.5 7
P ops 6.5 0.5 7
Classic 6 0.5 1
Jazz 10 1.2 3.3
Flat + Bass Booster 8.5 0.7 1 dB
Treble Adjustment
The Treble adjustment is made by changing the value of the 2 capacitors connected between TL --
OUTL pins and TR -- OUTR pins. Please refer to the diagram below.
1800 pF
1500 pF
1200 pF
Hz
Figure 6: TL - OUTL Capacitors vs. Frequency Response
As the capacitor value becomes bigger, the treble of the gain frequency curve is shifted down. Likewise,
as the capacitor value becomes smaller, the treble gain frequency curve shifts the opposite direction.
Referring to the diagram above, we see that at 6dB, different capacitor values exhibit different frequency
responses. Capacitor value 1800 pF has a lower frequency gain response than 1200 pF capacitor.
Bass Adjustment
Bass adjustments can be made by changing the values of the capacitors connected between BL1 -- BL2
pins, and BR1 -- BR2 pins. The larger the capacitor value used, the frequency response curve shifts
down. Likewise, the smaller the capacitor value, the frequency response curve shifts the opposite
direction. Please refer to the diagram below.
0.056 uF
0.068 uF
0.1 uF
Note: ○ ○ ○
= 0.1 uF, = 0.068 uF = 0.056 uF
In the diagram above, at 9 dB -- different capacitor values exhibit different frequency responses. A
capacitor with a value of 0.1 uF has smaller frequency response than a 0.056 uF capacitor.
o
Topr O perating Temperature - 20 ~ 75 C
o
Tstg Storage Temperature - 40 ~ 125 C
ELECTRICAL CHARACTERISTICS
(Unless otherwise stated: Vcc=9V, Vi=1 Vrms, f = 1 KHz)
Limit
Symbol Parameter Test Condition Unit
Min. Typ. Max.
O perating
Vcc 5 9 Volt
Voltage
O perating Vcc=9V, Vi=0V, Flat
Icc 11 mA
Current Mode
Maximum O utput
VOM Vcc=9V 3.5 Vrms
Voltage
Vcc=9V,Vi=0V
VNO O utput N oise BW=400~30K Hz 20 u Vrms
A- Weighting
Vcc=9V, Vi=0.2Vrms
Total Harmonic
THD BW=400~30K Hz 0.02 %
Distortion
A- Weighting
RIN Input Impedance Vcc=9V 50 60 K O hms
O utput
ROUT Vcc=9V 5.5 K O hms
Impedance
Maximum Input
VIMAX Vcc=9V 2.0 Vrms
Voltage
APPLICATION CIRCUIT
APPLICATION CIRCUIT
ORDER INFORMATION
PACKAGE INFORMATION
24 Pins, DIP Package (300 mil)
D imension in
S ymbol
Mil
A 1245
B 65
C 55
D imensions in D imensions in
S ymbol Millimeter Inches
Min N om Max Min N om Max
A 2.36 2.49 2.64 0.093 0.098 0.104
A1 0.10 - 0.30 0.004 - 0.012
A2 - 2.34 - - 0.092 -
B 0.33 0.41 0.51 0.013 0.016 0.020
C 0.23 0.25 0.30 0.009 0.010 0.012
D 15.19 15.39 15.49 0.598 0.606 0.610
E 7.39 7.49 7.59 0.291 0.295 0.299
e - 1.27 - - 0.050 -
H 10.01 10.31 10.64 0.394 0.406 0.419
L 0.38 0.81 1.27 0.015 0.032 0.050
y - - 0.10 - - 0.004
θ 0O - 8O 0O - 8O