Professional Documents
Culture Documents
Ammo Message and Tech Bull 1
Ammo Message and Tech Bull 1
MJL) AMSAC-RO-S REDSTONE ARSENAL AL (Ji:FF.LAKE@US.ARMY.MrL) REDSTONE ARSENAL AL (ALFRED.S.THOMAS@U5.ARMY.Mll) AMSAC~RO-P AMSAC-RO-E
AMSAC-RO~C-CM NEW
CUMBERLAND PA (JOSEPH.P.DECKER@US.ARMY.MIL) AMSAC-RO-S-CM NEW CUMBERLAND (DONALD.BUTLER@US.ARMY.MIL) AMSAC-RO-E-CM NEW CUMBERLAND PA (MARTHA.LETITIA.JACKSON@US.ARMY.MIL) ROCK-JMC-SAM-SUPPORT@CONUS.ARMY.MIL SUBJECT: SECURITY ASSISTANCE (SA) AMMUNITION SA-AIN-2010-19 A. MESSAGE HQJMC AMSJM-QAS 161827Z APR 09, SUBJECT: AMMUNITION INFORMATION NOTICE (AIN) 074-10; CTG, 7.62MM, M134/GAU-2/GAU-17/MK44 MINIGUNS, DODICS / A258/ AA36 1305-A163/ A164/ A165/AI68/A257 AS PACKAGED FOR USE IN INFORMATION NOTICE
1. REFERENCEA WAS PROVIDED TO US ARMY UNITS AND ACTIVITIES AND WAS NOT TRANSMITIED TO FOREIGN MILITARY SALES COUNTRIES. REQUEST THIS AIN BE LISTED IN PARAGRAPF!3BELOW. 7.62MM MINIGUNS ARE DISSEMINATED TO ALL PERSONNEL INVOLVED IN INSPECTING, STORING, HANDLING, lSSUING, OR USING AMMUNITION
OCCASIONALLY ENCOUNTERING SERIOUS MALFUNCTIONS CAUSING DAMAGE TO WEAPON SYSTEMS. FORMAL INVESTIGATIONS HAVE BEEN INITrATED WITH SIGNIFICANT ATIENTION GIVEN TO AMMUNITION AMMUNITION AND WEAPON ACTION TIME. LONG ACTION
TIME/HANG-FIRE
IS KNOWN TO CAUSE MINIGUN MALFUNCTION. DODICS AND PACKAGED CONFIGURATIONS ARE MINIGUN SYSTEMS.
NSN DODIC CONFIGURATION TV PER CAN 1305-00-143-8486 1305-00-152-3292 1305-00-926-3942 1305-00-935-9247 1305-01-380-9803 1305-01-380-9840 1305-01-458-6923 Al63 Al68 9 M80 BALL/1 M62 TRACER 2x750
A165 4 M80 BALL/1 M62 TRACER 2x750 A164 M80 BALL 2x750 A257 9 M80 BALL FS/1 M62 DIM TRACER 2x750 A258 14 M80 BALL FS/1 M62 DIM TRACER 2x750 AA36 9 M993 AP/l M62 TRACER 2X750
AMMUNITIOf\J
IN CONFIGURATIONS
A143)
IN AN ATIEMPTTO OPERATIONS
EXCEPT
ASIA AND OTHER THEATERS OF COMBAT SHOWN IN PARA 3 ABOVE ARE NOT
5. AMMUNITION
GUNS ARE
NOT ALL REQUIRED TO MEET THE HIGHER QUALITY STANDARDS AMMUNITION. ALL SECOND SOURCE (NON-LAKE MACHINE CITY) 7.62MM
GUNS ARE NOT TESTED FOR MINIGUN OF FOREIGN MANUFACTURE THROUGH OFFICIAL
USE. UNITS MUST NOT USE ANY 7.62MM FOR USE IN MINIGUNS US MILITARY MINIGUN
AMMUNITION
WAS ACQUIRED
PROCUREMENT
CHANNELS AND IS SPECIFICALLY PACKAGED FOR FOREIGN AMMUNITION AMMUNITION. MAY NOT MEET THE HIGHER
USE. UNAUTHORIZED
QUALITY STANDARDS
6. DISREGARD OF THE PARAMETERS OF THIS AIN MAY RESULT IN SERIOUS DAMAGE TO AIRCRAFT, WEAPON SYSTEMS, AND PERSONNEL INJURY.
LISTED IN PARAGRAPH
3 HAS
AUSTRALIA
(AT-B-UBF,
UCQ)
8. ANY FURTHER INQUIRIES SHOULD BE DIRECTED TO THE HQ, JMC, SECURITY ASSISTANCE ADMINISTRATIVE COMMERCIAL (309}-782-3560 POINT OF CONTACT, OR DSN 793-3560. ROCK-JMC-SAM-SUPPORT,
BULLETIN.
Links 3 June 2009
M13 Ammunition
AERO M134D
MINIGUN:
M13 Ammunition Link Operation with DC Ammunition Booster Assembly Part Number DB1000
1.
PURPOSE. This Technical Bulletin provides operator information for International End-Users using the Dillon Aero DC Ammunition Booster Assembly with 7.62 mm NATO ammunition, with non-standard M13 links. This is a standalone document. General. It has come to Dillon Aero's attention that International EndUsers are using 7.62mm ammunition with non-standard links. These non standard links are causing ammunition induced feed jams. Testing has shown that the initial burst will fire with no malfunctions. On the second burst, the operator may encounter a feed jam. Once the malfunction is cleared by the operator this malfunction may reoccur as described above. The non-standard link binds up in the Booster Assembly causing a feed jam. The Booster Assembly has been designed to accommodate all standard 7.62 NATO ammunition including SLAP and blank rounds using standard M13 links. One way to identify non-standard links is during the loading procedure. It is difficult to push or pull ammo through the booster assembly. Refer to Page 4 for inspection guidelines regarding irregular M13 links.
2.
Page lof3
3.
PRECAUTIONS AND RECOMENDATIONS. Use of non-standard M13 links are not recommended. Dillon Aero has compiled a partial list of ammunition companies who manufacture 7.62mm ammunition using standard M13 links. The ammunition from the manufactures listed below is known to be compatible for use with the M134D Minigun DC Ammunition Booster Assemblies. This is only a Partial List of Ammunition
Companies:
Zaklady Metalowe Mesko S.A.
FN HERSTAL, S.A. Voie de Liege, 33 B-4040 Herstal, Belgium Tel.: +32 4 240 81 11 Fax: +32 4 240 88 99
SMEOrdnance Sdn Bhd
Lot 5065, Locked Bag No. 101 48109 Batu Arang Selangor, Malaysia Tel: +60 3 60352521 Fax: +60 3 60352645
ul. Legion6w 122 26-111 SkarzyskoKamienna Poland Tel: +48 41 253 44 00 Fax: +48 41 252 02 80 Email: mesko@mesko.com.pl URL: www.mesko.com.pl
ATK Small Caliber Systems
Lake City Army Ammunition Plant P.O. Box 1000 Independence, MO 64051 Tel: +1 816 796 796 7101 4. CONTACT INORMATION. If you have any question please reference this Technical Bulletin when calling (480)333-5450 (Home Office) or +971 825 7379 (Middle East Regional Service Center) .
50
Page 2 of 3
locatine
Grove
Grove
Page 3 of3