Professional Documents
Culture Documents
Angle Measurements
Angle Measurements
Exp.4
17/09/1434
Objectives
To be familiar with the tools used for angle measurement. To know how to use the block gauges to measure angles and to calibrate measuring tools. To learn how to measure angles using different methods
17/09/1434
Block Gauges
Gauge blocks are a necessity in any testing environment that requires linear dimensional accuracy and/or calibration of measuring tools, such as micrometers and calipers. Each block is engraved with an individual serial number and the size of the gauge for calibration purposes. The purpose of gauge blocks is to provide linear dimensions known to within a given tolerance.
17/09/1434
Block Gauges
The actual size must be known The faces must be parallel The surface must have a smooth finish The surfaces must be flat
The materials gauge blocks are made from are selected for, hardness, temperature stability, corrosion resistance, and high quality finish.
17/09/1434
0
0.001
.5
0.01
0.5
10
17/09/1434
17/09/1434
Sine bars
A sine bar is a tool used to measure angles in metalworking. It consists of a hardened, precision ground body with two precision ground cylinders fixed at each end, the rollers are positioned at a precise distance and the top of the bar is parallel to the center line of the rollers. The dimension between the two rollers is chosen to be a whole number (for ease of later calculations)
17/09/1434
Sine bars
17/09/1434
Combination Set
It is used as a rule, a square, a miter, a depth gage, a height gage, and a level.
17/09/1434
Measuring angles 90 and 45 angles. Determining flatness Measuring the center of a circular bar. Protractor head allows angles to be set and measured between the base and ruler. A rudimentary level for approximating level surfaces is incorporated in the protractor and also the 45 holder.
10
17/09/1434
1.
3.
2.
4.
Combination square
A Combination Square consisting of the ruler, 45 holder, protractor and center square. Marking the work surface; with the included Scribe Point stored in a drilled hole in the Square Base.
14
17/09/1434
Protractors
Plate Protractor: capable of measuring to within 1-degree Protractor heads: have revolving turrets with direct-reading
double graduations, 0-180 degrees in opposite directions.
15
17/09/1434
Examples
The reading is 46 - 20
16
17/09/1434
Your Report
Your report should have a lot of details about angle measurement tools (List the parts and the function of each part).