Professional Documents
Culture Documents
Iso Manual
Iso Manual
Iso Manual
CUSTOMER : MODEL.NAME: I.TECHNICAL FEASIBILITY a. Engineering Specifications b. Tolerancing Standards c. Material Specifications LEAF NO.
1 2 3 4 5 6 7 8 9 10 11 12 13 14
SECTION
MATERIAL
SHEAR LENGTH
WEIGHT KG
Wastage %
Input Wt. Kg
Cost
<JAI> II.COMPONENT DETAILS Sl. Name of Component no 1. Centre Bolt & Nut 2. Clamp Bolt & Nut 3. Rivet 4. Spacer Tube 5. Bush 6. Clamp - Big 7. Clamp - Small 8. 9. 10. III.Manufacturing Feasibility a. Manufacturing Capability b. Material Handling c. Process Capability ( CpK) d. SPC - Spl. Characteristics e. Is SPC established similar to (d)
Qty
Specification
Weight Kg
Cost of Each
Total Cost
Requirements
Feasibility
<JAI>
SURFACE COATING Pre-Coating : Red Oxide/Zinc Rich/Graphite Paint/Graphite Grease Final Coating : Black Paint OTHER RESOURCES REQUIREMENTS
COSTING DETAILS