Professional Documents
Culture Documents
Tamba Han
Tamba Han
Tamba Han
Idler spacing (Si) based on : 1. Wb = weight of belt in pounds per foot of belt length 2. Wm = weight of material, lbs per foot of belt length
Wb+Wm, lbs/ft Less than 50 50-90 100 to 149 150 and above
# The return idler spacing is 10 ft nominal and loading of the belt is uniform and continuous.
Belt type For dry, clean rubber belts For dusty environment For wet work
Source: Mechanical Engineering Reference Manual for the PE Exam, Michael R. Lindeburg
http://conveyorbeltguide.com/Engineering.html
# Ideally , the coefficient of friction between a rubber-coated pulley and a rubber belt is approximately 0.55