Professional Documents
Culture Documents
Bluesbreaker Project: Bill of Materials
Bluesbreaker Project: Bill of Materials
This is an excellent blues overdrive. Superb neck-pickup bluesy tone. There are two versions of the project in this file. One with the original bypass wiring and one with improved 3PDT foot switch wiring.
Bill of Materials
Resistors (1/4 watt rating) 1 - 1k 1 - 3k3 (3.3k) 3 - 4k7 (4.7k) 1 - 4k7 to 8k2 (for LED) 2 - 6.8k 2 - 47k 1 - 220k 2 - 1M 1 - 2.2M Pots (1/4 watt or higher rating) 1 - 25k (or 22k) linear (Tone) 1 - 100k linear (Gain) 1 - 100k log (audio) (Volume) ICs 1 TL072 Capacitors (minimum 16 volt rating) 1 - 47pF 5 - 0.01uF 1 - 0.1uF 2 - 0.22uF 1 - 100uF Other 1 3PDT or DPDT heavy duty foot switch (bypass) 1-Optional LED indicator with currentlimiting resistor 1 mono quarter inch jack 1 stereo quarter inch jack 9v battery snaps & holder and/or DC jack knobs, Copper-clad board, etchant, or perfboard 24 gauge stranded wire Enclosure
Page 1 of 5
Bluesbreaker Project
Version 2006January16 Copyright 2006 JD Sleep
Permission refused for posting/serving this file from any site other than www.generalguitargadgets.com
Page 2 of 5
Bluesbreaker Project
Version 2006January16 Copyright 2006 JD Sleep
Permission refused for posting/serving this file from any site other than www.generalguitargadgets.com
Page 3 of 5
Bluesbreaker Project
Version 2006January16 Copyright 2006 JD Sleep
Permission refused for posting/serving this file from any site other than www.generalguitargadgets.com
Page 4 of 5
Bluesbreaker Project
Version 2006January16 Copyright 2006 JD Sleep
Permission refused for posting/serving this file from any site other than www.generalguitargadgets.com
Page 5 of 5