Professional Documents
Culture Documents
40K Tower
40K Tower
For instance the tower roof sides will require their edges to be angled. most of that work I did freehand so the templates are estimates. Tower roof side reinforcements may require extra extra care as you can see in the picture. 40k Tower designed by dwez http://40kaddict.blogspot.com
on foamcard
tower walls
tower roof walls
2nd storey 1st storey 2nd storey 2nd storey 1st storey
1st storey
cocktail stick hinge doors outpost roof hatch Tower roof wall reinforecments. Cut black outline first. Mount on foam pieces check grey outline will fit your tower and then trim to fit.
fold
fold
tower roof
fold
fold
on foamcard
buttresses require edging, either with masking tape or with 6mm card. Mine was cut to overlap like tiles, use your judgement
tower buttresses
tower outpost
Storey dividers
What the tower should look like 40k Tower designed by dwez http://40kaddict.blogspot.com