Professional Documents
Culture Documents
If Its Tough Enough For The Sherman Tank Its Tough Enough For You
If Its Tough Enough For The Sherman Tank Its Tough Enough For You
If Its Tough Enough For The Sherman Tank Its Tough Enough For You
http://www.titussteel.com/our-products/wear-steel/moly-bond-500/
MOLY-BOND 500
If Its Tough Enough For The Sherman Tank Its Tough Enough For You
GENERAL INFORMATION TITUS Moly-Bond 500 heat treated wear steel plate is intended for severe wear applications requiring a high degree of abrasion resistance. Originally developed for extreme wear applications including ballistics, Titus Moly-Bond 500 combines a high carbon level with Tituss proven manganese, moly-boron chemistry to produce a steel with up to fifteen times the wear resistance of ordinary steel. Titus A/R MOLY- BOND is heat treated to provide a Brinell hardness range of 477 to 534 with a typical Brinell hardness of 514. Abrasion resistance is typically 5:1 compared to mild steels.
CHEMICAL COMPOSITION (TYPICAL) C(%) Mn(%) Si(%) S(%) P(%) Mo(%) B(%)
0.28%
1.35%
0.28%
0.003%
0.008%
0.32%
0.002%
MECHANICAL CHARACTERISTICS (TYPICAL) YIELD TENSILE UTS 20C (68 F) 1,690 MPa (245 Ksi) ELONGATION (5d) 17% CHARPY Kcvl N/A HARDNESS BHN 514
1 of 1
8/6/2013 2:39 PM