Professional Documents
Culture Documents
SHRB-SN: 1" (25 MM) Deflection SHRB Spring Hanger With Neoprene and Bottom Cup
SHRB-SN: 1" (25 MM) Deflection SHRB Spring Hanger With Neoprene and Bottom Cup
SHRB-SN: 1" (25 MM) Deflection SHRB Spring Hanger With Neoprene and Bottom Cup
Noise Control | Vibration Isolation | Restraint Systems tel: 416-291-7371 fax: 416-291-8049 1-800-565-8401 1-888-811-2264 web: www.vibro-acoustics.com eml: info@vibro-acoustics.com
1 (25 mm) Deflection SHRB Spring Hanger with Neoprene and Bottom Cup
File No.: DS-SHRBSN-004 Supersedes: DS-SHRBSN-003 Date: 16 Sep 2011 Date: 6 Jun 2011
SHRB-SN
PE RFORMANC E Model Element Color Spring Color Rated Load Spring Deflection at rated load in mm 1.0 25 1.0 25 1.0 25 1.0 25 1.0 25 1.0 25 1.0 25 Isolator Weight lb kg 1.0 0.5 1.0 0.5 1.1 0.5 1.1 0.5 1.1 0.5 1.1 0.5 1.2 0.5
lb kN 15 0.07 30 0.13 45 0.20 60 0.27 100 0.44 150 0.67 200 0.90
SHRB-SN-15 neoprene element SHRB-SN-30 SHRB-SN-45 SHRB-SN-60 SHRB-SN-100 SHRB-SN-150 SHRB-SN-200 compression cup H color-coded spring neoprene bottom cup DIME N SION S Model SHRB-SN 15200
L in mm 2 3/4 70
W in mm 2 51
H in mm 6 1/4 152
NOTE S Spring hanger with steel spring and neoprene element in a welded steel housing Spring sits in a molded neoprene cup which includes a sleeve through the bottom hole Hanger designed for minimum of 15 degree angular misalignment from vertical before support rod contacts sleeve Vertical uplift stopwasher must be added on spring hangers for seismically restrained equipment, duct or piping Minimum 50% additional travel to solid Springs are powder coated, housings and compression cups are galzanized
1: 2: 3:
6: 7: 8: 9: 10:
Rev:
Drawn by:
4: 5: