Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Name:

Green Ringer

Manufacturer / Designer:

Dan Armstrong

Revision:

9/23/95

Model #

+9v 100uf

160k 0.047uf Input

18k

10k 0.047uf 2SA666

22k

10k

47k 0.1uf
+

*
66k 2SA666 66k
Tantalum

2SC828 0.047uf

Output

560k
+

6k2

10k

22k

+9vdc

The transitor marked "*" has no markings other than three stripes; green, blue, white, from top to bottom. It is PROBABLY a low gain NPN used as a dual diode with the anodes connected together at the base of the final transistor. The continuity test on the device shows no conductivity except that the topmost pin conducts when it is positive of the pins in the middle and other side; otherwise, no conduction. This is what would be expected if it were an NPN with the same pinout (base, collector, emitter) as the other transistors.

You might also like